[1] [1] Gu D D, Shen Y F. Microstructures and properties of direct laser sintered tungsten carbide (WC) particle reinforced Cu matrix composites with Re-Si-Fe addition: A comparative study[J]. Journal of Materials Research, 2009, 24(11): 3397-3406.

[2] [2] Liu Haiqing, Liu Xiubo, Meng Xiangjun, et al.. Study on γ-NiCrAlTi/TiC+TiWC2/CrS +Ti2CS high-temperature self-lubricating wear resistant composite coating on Ti-6Al-4V by laser cladding[J]. Chinese J Lasers, 2014, 41(3): 0303005.

[3] [3] Li Jianing, Gong Shuili, Wang Xichang, et al.. Physical and surface performance of laser clad Ni based coating on a TA15-2 alloy[J]. Chinese J Lasers, 2013, 40(11): 1103008.

[4] [4] Zhang Weiping, Lu Donghua, Yu Juanjuan, et al.. Application of zirconia toughening mechanism on laser cladding[J]. Chinese J Lasers, 2014, 41(11): 1103008.

[5] [5] Yuan Qinlu, Hu Rui, Li Jinshan, et al.. Development of gradient composite material preparation technology[J]. Ordnance Material Science and Engineering, 2003, 26(6): 66-99.

[6] [6] Ayers J D, Tucker T R. Particulate-TiC-hardened steel surfaces by laser melt injection[J]. Thin Solid Films, 1980, 73(1): 201-207.

[7] [7] Riabkina-Fishman M, Rabkin E, Levin P, et al.. Laser produced functionally graded tungsten carbide coatings on M2 high-speed tool steel[J]. Materials Science and Engineering A, 2001, 302(1): 106-114.

[8] [8] Rong Lei, Huang Jian, Li Zhuguo, et al.. Microstructure and property of laser cladding Ni-based alloy coating reinforced by WC particles[J]. China Surface Engineering, 2010, 23(6): 40-44.

[9] [9] Ma Guangyi ,Wang Jiangtian, Niu Fangyong, et al.. Influence of powder distribution on the Al2O3 thin-wall ceramic formed by laser engineered net shaping[J]. Chinese J Lasers, 2015, 42(1): 0103006.

[10] [10] Li Zhihong, Yang Lijing, Zhang Qunli, et al.. Comparative research of Stellite 6 coatings prepared by supersonic laser deposition and laser cladding[J]. Chinese J Lasers, 2015, 42(5): 0503008.

[11] [11] Han Jiecai, Dong Shiyun, Zhang Xinghong, et al.. Present status of the manufacture processing for metal/ceramic graded coatings[J]. Journal of Materials Engineering, 1998(12): 39-43.

[12] [12] Wang Zi. Simulation investigation of laser-melt injection of SiC-316L hybrid particles on AZ31B magnesium alloy surface[D]. Nanchang: East China Jiaotong University, 2013: 1-10.

[13] [13] Pei Y T, Ocelik V, Hosson De, et al.. SiCp/Ti6Al4V functionally graded materials produced by laser melt injection[J]. Acta Materialia, 2002, 50(8): 2035-2051.

[14] [14] Chen Y B, Liu D J, Li L Q, et al.. WCp/Ti-6Al-4V graded metal matrix composites layer produced by laser melt injection[J]. Surface and Coatings Technology, 2008, 202(19): 4780-4787.

[15] [15] Volppa J, Dietza T, Vollertsen F. Particle property impact on its distribution during laser deep alloying processes[J]. Physics Procedia, 2014, 56: 1094-1011.

[16] [16] Vreeling J A, Ocelik V, Hosson De. Ti-6Al-4V strengthened by laser melt injection of WCp particles[J]. Acta Materialia, 2002, 50(19): 4913-4924.

[17] [17] Zhang Xiangjun. Microstructures and wear resistance of coatings produced by laser melt injecting WC on Q235 steel surface[D]. Harbin: Harbin Institute of Technology, 2007: 15-21.

[18] [18] Bachmann M, Avilov V, Gumenyuk A, et al.. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminum parts[J]. International Journal of Heat and Mass Transfer, 2013, 60: 309-321.

[19] [19] Bachmann M, Avilov V, Gumenyuk A, et al.. Numerical simulation of full-penetration laser beam welding of thick aluminum plates with inductive support[J]. Journal of Physics D: Applied Physics, 2012, 45(3): 035201.

[20] [20] Hu Yong, Chen Zhijun, Yao Jianhua, et al.. Numerical simulation of the static magnetic field regulation of the laser molten pool heat transfer and flow behavior[J]. Applied Laser, 2014, 34(6): 508-512.

[21] [21] Cai Yuan. Simulation investigation of hybrid laser-TIG melt injection of ceramic particles on Al surface[D]. Harbin: Harbin Institute of Technology, 2010: 12-42.

[22] [22] Wang L, Yao J H, Hu Y, et al.. Suppression effect of a steady magnetic field on molten pool during laser remelting[J]. Applied Surface Science, 2015, 351: 794-802.

[23] [23] Wang Liang, Hu Yong, Song Shiying et al.. Suppression effect of a steady magnetic field on surface undulation during laser remelting[J]. Chinese J Lasers, 2015, 42(11): 1103005.

[24] [24] Che Defu, Li Huixiong. Multiphase flow and its application[M]. Xi′an: Xi′ an Jiaotong University Press, 2007: 80-89.

[25] [25] Li Fuquan, Chen Yanbin, Li Liqun. Microstructures and wear resistance of coatings produced by laser melt injecting WC on Q235 steel surface[J]. Transactions of the China Welding Institution, 2010, 31(4): 28-33.

[26] [26] Hu Hanqi. Metal solidification principle[M]. Beijing: China Machine Press, 2000: 117-135.