[1] [1] Chen Ping, Yu Qi, Sun Ming et al.. Advances in high performance FRTP composites［J］. Fiber Composites, 2005, 22(2): 52～57

[2] [2] W. S. O. Rodden, S. S. Kudesia. A comprehensive study of the long pulse NdYAG laser drilling of multi-layer carbon fibre composites［J］. Opt. Commun., 2002, 210(3-6): 319～328

[3] [3] T. Hirogaki, E. Aoyama, H. Inoue. Laser drilling of blind via holes in aramid and glass/epoxy composites of multi-layer printed wiring boards［J］. Composites, 2001, 32(7): 963～968

[4] [4] T. O. Young, D. Driscoll. Impact of NdYAG laser drilled holes on the strength and stiffness of laminar flow carbon fibre reinforced composite panels［J］. Composites, 2002, 33(1): 1～9

[5] [5] C. T. Pan, H. Hocheng. The anisotropic heat-affected zone in the laser grooving of fiber-reinforced composite material［J］. J. Mater. Process. Technol., 1996, 62(1-3): 54～60

[6] [6] Huang Guojun, Yang Zhixing, Duan Zhuping. Investigation on the fracture threshold of woven carbon-fiber/epoxy plates under mechanical loading and heating by incident laser beams［J］. High Power Laser and Particle Beams, 1999, 11(6): 677～681

[7] [7] Chen Ming, Long Lianchun, Liu Shibing et al.. Destruction of composite material under tensile pre-stressing and laser irradiation［J］. Chinese Journal of Applied Mechanics, 2010, 27(2): 412～417

[8] [8] Huang Yongguang, Liu Shibing, Long Lianchun et al.. Observation on the process of continuous-wave Nd∶YAG laser ablation on carbon fiber composite material［J］. Chinese J. Lasers, 2008, 35(12): 2042～2046

[9] [9] Ma Liang, Huang Weidong, Yu Jun et al.. Parametric finite element model of temperature/stress field evolution by metal laser solid forming［J］. Chinese J. Lasers, 2009, 36(12): 3226～3232

[10] [10] Zhang Jian, Li Sijian. Thermal stress of composite laminated structure with a large number of layers［J］. Acta Mechanica Solida Sinica, 1997, 18(4): 359～364

[11] [11] Qiang Xiwen, Zhang Jianquan, Liu Feng et al.. Thermal stress damage of semiconductors induced by laser beam［J］. Chinese J. Lasers, 2000, 27(8): 709～713

[12] [12] Jiang Yinfang, Lai Yanling, Zhang Lei et al.. Investigation of residual stress hole on a metal surface by laser shock［J］. Chinese J. Lasers, 2010, 37(8): 2073～2079

[13] [13] J. Lachaud, Y. Aspa, L. Gerard. Analytical modeling of the steady state ablation of a 3D C/C composite［J］. International Journal of Heat and Mass Transfer, 2008, 51(9-10): 2614～2627

[14] [14] Sun Chengwei. Response of Laser Irradiation［M］. Beijing: National Defense Industry Press, 2002. 202～260

[15] [15] Chen Yanbei, Lu Jian, Ni Xiaowu. Temperature and thermal stress fields during the laser irradiating a metal plate［J］. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2007, 35(s1): 129～132

[16] [16] Chen Ming. Response Analysis and Experimental Test of Composite Structure Irradiated by Laser［D］. Beijing: Beijing University of Technology, 2010, 13～14

[17] [17] Zhang Junhua, Sheng Zuming, Sun Jitong. Missile and Launch Vehicle Composite Structure Design Guidelines［M］. Beijing: China Astronautic Publishing House,1999. 14～35

[18] [18] Yin Fuyan. Correction technique for high temperature strain gauge under transient heating conditions［J］. Structure & Environment Engineering, 2005, 32(1): 36～42