[1] Greene J S, Morrissey M. Estimated pollution reduction from wind farms in Oklahoma and associated economic and human health benefits[J]. Journal of Renewable Energy, 2013, 924920(2013).

[2] Faulstich S, Hahn B, Jung H et al. Suitable failure statistics as a key for improving availability[C](2009).

[3] Harris T A, Crecelius W J. Rolling bearing analysis[J]. Journal of Tribology, 108, 149-150(1986).

[4] Lin Y C, Chen M S, Zhong J. Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel[J]. Journal of Materials Processing Technology, 205, 308-315(2008).

[5] Yang Z G, Li S X, Zhang J M et al. The fatigue behaviors of zero-inclusion and commercial 42CrMo steels in the super-long fatigue life regime[J]. Acta Materialia, 52, 5235-5241(2004).

[6] Syed R, Wang J G, Jing D Y et al. Case study: optimization of case depth in induction-hardened 42CrMo steel shaft[J]. IOP Conference Series: Materials Science and Engineering, 831, 012004(2020).

[7] Li Y K, Chen J D, Lu S P. Residual stress in the wheel of 42CrMo steel during quenching[J]. Acta Metallurgica Sinica, 50, 121-128(2014).

[8] Gui J, Wang G, Tang X et al[M]. Advances in asset management and condition monitoring(2019).

[9] Pfennig A, Kranzmann A. Effect of CO2 and pressure on the stability of steels with different amounts of chromium in saline water[J]. Corrosion Science, 65, 441-452(2012).

[10] Zhu L D, Xue P S, Lan Q et al. Recent research and development status of laser cladding: a review[J]. Optics & Laser Technology, 138, 106915(2021).

[11] Liu Y N, Ding Y, Yang L J et al. Research and progress of laser cladding on engineering alloys: a review[J]. Journal of Manufacturing Processes, 66, 341-363(2021).

[12] Zhu H M, Ouyang M N, Hu J P et al. Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding[J]. Ceramics International, 47, 12505-12513(2021).

[13] Li B C, Zhu H M, Qiu C J et al. Laser cladding and in situ nitriding of martensitic stainless steel coating with striking performance[J]. Materials Letters, 259, 126829(2020).

[14] Li B C, Zhu H M, Qiu C J et al. Development of high strength and ductile martensitic stainless steel coatings with Nb addition fabricated by laser cladding[J]. Journal of Alloys and Compounds, 832, 154985(2020).

[15] Wang Y F, Zhao X Y, Lu W J et al. Microstructure and properties of high speed laser cladding stainless steel coating on sucker rod coupling surfaces[J]. Chinese Journal of Lasers, 48, 0602114(2021).

[16] Zhu H M, Hu W F, Li Y Z et al. Effect of tempering temperature on microstructure and properties of laser-cladded martensitic stainless steel layer[J]. Chinese Journal of Lasers, 46, 1202001(2019).

[17] Ouyang J H, Pei Y T, Li X D et al. Effect of tempering temperature on microstructure and sliding wear property of laser quenched 4Cr13 steel[J]. Wear, 177, 203-208(1994).

[18] Li X, Hou J, Qu Y et al. A study of casting high-boron high-speed steel roll materials[J]. Materialwissenschaft Und Werkstofftechnik, 46, 1029-1038(2015).

[19] Cen Q, Fu H. A study of heat treatment of high-boron high-speed steel roll[J]. Materialwissenschaft Und Werkstofftechnik, 44, 612-617(2013).

[20] Zhu H M, Li Y Z, Zhang Z Y et al. Mechanical and corrosion properties of martensite/ferrite duplex stainless steel prepared via laser cladding[J]. Chinese Journal of Lasers, 45, 1202012(2018).

[21] Röttger A, Weber S, Theisen W. Supersolidus liquid-phase sintering of ultrahigh-boron high-carbon steels for wear-protection applications[J]. Materials Science and Engineering: A, 532, 511-521(2012).

[22] Zhou S B, Hu F, Zhou W et al. Effect of retained austenite on impact toughness and fracture behavior of medium carbon submicron-structured bainitic steel[J]. Journal of Materials Research and Technology, 14, 1021-1034(2021).

[23] Harwarth M, Brauer A, Huang Q L et al. Influence of carbon on the microstructure evolution and hardness of Fe-13Cr-xC(x＝0-0.7 wt.%) stainless steel[J]. Materials, 14, 5063(2021).

[24] Ren X Y, Fu H G, Xing J D et al. Effect of boron concentration on microstructures and properties of Fek-B-C alloy steel[J]. Journal of Materials Research, 32, 3078-3088(2017).

[25] Ma S Q, Xing J D, Fu H G et al. Microstructure and crystallography of borides and secondary precipitation in 18 wt.% Cr-4 wt.% Ni-1 wt.% Mo-3.5 wt.% B-0.27 wt.% C steel[J]. Acta Materialia, 60, 831-843(2012).

[26] Huang Y J, Zeng X Y. Investigation on cracking behavior of Ni-based coating by laser-induction hybrid cladding[J]. Applied Surface Science, 256, 5985-5992(2010).

[27] Wang T P, Zhang J, Liu C F et al. Microstructure and mechanical properties of Si3N4/42CrMo joints brazed with TiNp modified active filler[J]. Ceramics International, 40, 6881-6890(2014).

[28] Hutchinson B, Hagström J, Karlsson O et al. Microstructures and hardness of as-quenched martensites (0.1-0.5%C)[J]. Acta Materialia, 59, 5845-5858(2011).

[29] Hirota K, Mitani K, Yoshinaka M et al. Simultaneous synthesis and consolidation of chromium carbides (Cr3C2, Cr7C3 and Cr23C6) by pulsed electric-current pressure sintering[J]. Materials Science and Engineering: A, 399, 154-160(2005).

[30] Wang X H, Zhang M, Liu X M et al. Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding[J]. Surface and Coatings Technology, 202, 3600-3606(2008).

[31] Sharifi E M, Karimzadeh F, Enayati M H. Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites[J]. Materials & Design, 32, 3263-3271(2011).

[32] Cui G J, Wei J, Wu G X. Wear behavior of Fe-Cr-B alloys under dry sliding condition[J]. Industrial Lubrication and Tribology, 67, 336-343(2015).

[33] Jian Y X, Huang Z F, Xing J D et al. Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe-3.0 wt% B cast alloy[J]. Tribology International, 101, 331-339(2016).

[34] Shahriari A, Ghaffari M, Khaksar L et al. Corrosion resistance of 13wt.% Cr martensitic stainless steels: additively manufactured CX versus wrought Ni-containing AISI 420[J]. Corrosion Science, 184, 109362(2021).

[35] Zhao Y G, Liu W, Fan Y M et al. Influence of microstructure on the corrosion behavior of super 13Cr martensitic stainless steel under heat treatment[J]. Materials Characterization, 175, 111066(2021).

[36] Speidel M O. Nitrogen containing austenitic stainless steels[J]. Materialwissenschaft Und Werkstofftechnik, 37, 875-880(2006).