[2] [2] IMANAKA Y. Multilayered low temperature cofired ceramics (LTCC) technology［M］. New York：Springer US, 2005: 120-140.

[3] [3] RAUSCHER M, ROOSEN A. Influence of low-temperature co-fired ceramics green tape characteristics on shrinkage behavior[J]. International Journal of Applied Ceramic Technology, 2007, 4(5): 387-397.

[6] [6] BESENDRFER G, ROOSEN A, MODES C, et al. Factors influencing the green body properties and shrinkage tolerance of LTCC green tapes[J]. International Journal of Applied Ceramic Technology, 2007, 4(1): 53-59.

[7] [7] RAJ P M, CANNON W R. Anisotropic shrinkage in tape-cast alumina: role of processing parameters and particle shape[J]. Journal of the American Ceramic Society, 1999, 82(10): 2619-2625.

[8] [8] BESENDRFER G,ROOSEN A. Particle shape and size effects on anisotropic shrinkage in tape-cast ceramic layers[J]. Journal of the American Ceramic Society, 2008, 91(8): 2514-2520.

[9] [9] CHIANG M J,JEAN J H,LIN S C. The effect of anisotropic shrinkage in tape-cast low-temperature cofired ceramics on camber development of bilayer laminates[J]. Journal of the American Ceramic Society, 2011, 94(3): 683-686.

[10] [10] RAJ P M, DUNN S M, CANNON W R. Measurement of particle orientation in tape cast ceramic microstructures[J]. Journal of Computer-Assisted Microscopy, 1998, 10(1): 33-51.

[11] [11] JEAN J, WANG H R. Organic distributions in dried alumina green tape[J]. Journal of the American Ceramic Society, 2004, 84(2): 267-272.

[12] [12] ROOSEN A. Tape casting of ceramic green tapes for multilayer device processing[J]. Ceramic Transactions, 1999, 97: 103-121.

[13] [13] DIMARCELLO F V, KEY P L, WILLIAMS J C. Preferred orientation in Al2O3 substrates[J]. Journal of the American Ceramic Society, 2006, 55(10): 509-514.

[14] [14] ZER I O, SUVACI E, KARADEMIR B, et al. Anisotropic sintering shrinkage in alumina ceramics containing oriented platelets[J]. Journal of the American Ceramic Society, 2006, 89(6): 1972-1976.

[15] [15] RAJ P M, DLENA A, CANNON W R. Anisotropic shrinkage during sintering of particle-oriented systems-numerical simulation and experimental studies[J]. Acta Materialia, 2002, 50(10): 2559-2570.

[16] [16] WATANABE H, KIMURA T, YAMAGUCHI T. Particle orientation during tape casting in the fabrication of grain-oriented bismuth titanate[J]. Journal of the American Ceramic Society, 2005, 72 (2): 289-293.

[17] [17] WU M, MESSING G L. Fabrication of oriented SiC-whisker-reinforced mullite matrix composites by tape casting[J]. Journal of the American Ceramic Society, 1994, 77 (10): 2586-2592.

[18] [18] SHUI A, KATO Z, TANAKA S, et al. Sintering deformation caused by particle orientation in uniaxially and isostatically pressed alumina compacts[J]. Journal of the European Ceramic Society, 2002, 22(3): 311-316.

[22] [22] XIA Y, HU Y, REN L, et al. Manufacturing a high performance film of CaO-B2O3-SiO2 glass-ceramic powder with surface modification for LTCC application[J]. Journal of the European Ceramic Society, 2018, 38(1): 253-261.

[23] [23] DELLERT A, HEUNISCH A, ROOSEN A. The origin of anisotropic shrinkage in tape-cast green tapes[J]. International Journal of Applied Ceramic Technology, 2011, 8(6): 1312-1319.

[26] [26] RABE T, SCHILLER W A, HOCHHEIMER T, et al. Zero shrinkage of LTCC by self-constrained sintering[J]. International Journal of Applied Ceramic Technology, 2005, 2(5): 374-382.

[33] [33] MIELLER B, RABE T, RANGELOV V. In situ shrinkage measurement during pressure\|assisted sintering of low temperature co\|fired ceramic panels[J]. International Journal of Applied Ceramic Technology, 2016, 14(2): 245-251.