Researching | Formation and Controlling Mechanism of Pores in Laser-TIG Hybrid Welding of 6061-T6 Aluminum Alloys at High Peed

Chinese Journal of Lasers, Volume. 45, Issue 3, 302001(2018)

Formation and Controlling Mechanism of Pores in Laser-TIG Hybrid Welding of 6061-T6 Aluminum Alloys at High Peed

Wang Hongyang, Sun Jia, and Liu Liming^*

Author Affiliations

[in Chinese]

show less

Abstract Get PDF(in Chinese)

Figures&Tables (7)

References (20)

Paper Information

References(20)

[1] Zhu Z T, Wang X F, Yang X Y et al. Droplet transfer in aluminum alloy laser-MIG hybrid welding coupled by high frequency pulses and its cladding characteristics[J]. Transactions of the China Welding Institution, 37, 39-44(2016).

[2] Qiao J N, Wang Q M, Zou J L et al. Microstructure and mechanical property of A7N01 aluminium alloy joints by fiber laser-variable polarity TIG hybrid welding with filler wire[J]. Chinese Journal of Lasers, 43, 0902001(2016).

[3] Zhai Y F, Huang J, Li M et al. Research on high speed high power CO2 laser welding of 6061-T6 aluminium with filler wire[J]. Chinese Journal of Lasers, 38, 0503001(2011).

[4] Zhang D, Chen W H, Sun Y H et al. Analysis of mechanical properties about the welding joints of 2219 aluminum alloy[J]. Journal of Aeronautical Materials, 33, 45-49(2013).

[5] Peng X Y, Cao X W, Duan Y L et al. Microstructures and properties of MIG welded joint of 7020 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 24, 912-918(2014).

[6] Zhu H, Chen Q, Chen J H. Influence rule of HAZ geometrical dimension to aluminum alloy joint deformation and strength[J]. Transactions of the China Welding Institution, 33, 77-81(2012).

[7] Xu L H, Tian Z L, Peng Y et al. Microstructure and mechanical properties of high strength aluminum alloy laser welds[J]. Chinese Journal of Lasers, 35, 456-461(2008).

[8] Cai X Y, Li H, Yang L J et al. Improvement of weld appearance of laser-short circuiting transfer metal-inert gas (MIG) hybrid welded aluminium alloys[J]. Chinese Journal of Lasers, 41, 0503001(2014).

[9] Zhang D F, Yang Y, Wang T J et al. Comparison of fiber laser-MIG arc hybrid and fiber laser welding of 6009 aluminium alloy[J]. Materials Review, 29, 121-124(2015).

[10] Zhang C, Gao M, Zeng X Y. Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy[J]. Journal of Materials Processing Technology, 231, 479-487(2016). http://www.sciencedirect.com/science/article/pii/S092401361630019X

[11] Wang Q Y, Chen H, Zhu Z T et al. A characterization of microstructure and mechanical properties of A6N01S-T5 aluminum alloy hybrid fiber laser-MIG welded joint[J]. International Journal of Advanced Manufacturing Technology, 86, 1375-1384(2016). http://link.springer.com/10.1007/s00170-015-8280-y

[12] Xu G X, Zhang W W, Liu P et al. Numerical analysis of fluid flow in laser+GMAW hybrid welding[J]. Acta Metallurgica Sinica, 51, 713-723(2015).

[13] Ascari A, Fortunato A, Orazi L et al. The influence of process parameters on porosity formation in hybrid laser-GMA welding of AA6082 aluminum alloy[J]. Optics and Laser Technology, 44, 1485-1490(2012). http://www.sciencedirect.com/science/article/pii/S0030399211004026

[14] Ola O T, Doern F E. Factors controlling keyhole-induced porosity in cold wire laser welded aluminum[J]. Journal of Laser Applications, 29, 012008(2017). http://scitation.aip.org/content/lia/journal/jla/29/1/10.2351/1.4967510

[15] Kroos J, Gratzke U, Simon G. Towards a self-consistent model of the keyhole in penetration laser beam welding[J]. Journal of Physics D, 26, 474-480(1993). http://adsabs.harvard.edu/abs/1993JPhD...26..474K

[16] Kim J S, Watanabe T, Yoshida Y. Effect of the beam-defocusing characteristics on porosity formation in laser welding[J]. Journal of Materials Science Letters, 14, 1624-1626(1995). http://link.springer.com/article/10.1007/BF00455435

[17] Tucker J D, Nolan T K, Martin A J et al. Effect of travel speed and beam focus on porosity in alloy 690 laser welds[J]. Journal of Metals, 64, 1409-1417(2012). http://link.springer.com/article/10.1007/s11837-012-0481-3

[18] Kawahito Y, Mizutani M, Katayama S. Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry[J]. Journal of Physics D, 40, 5854-5859(2007). http://www.ingentaconnect.com/content/iop/jphysd/2007/00000040/00000019/art00009

[19] Tao W, Yang Z B, Shi C Y. et al. Simulating effects of welding speed on melt flow and porosity formation during double-sided laser beam welding of AA6056-T4/AA6156-T6 aluminum alloy T-joint[J]. Journal of Alloys and Compounds, 699, 638-647(2017). http://www.sciencedirect.com/science/article/pii/S0925838816343018

[20] Semak V, Matsunawa A. The role of recoil pressure in energy balance during laser materials processing[J]. Journal of Physics D, 30, 2541-2552(1997). http://www.ingentaconnect.com/content/iop/jphysd/1997/00000030/00000018/art00008

CLP Journals

[1] Li Qiaoyan, Zhao Xin, Xin Zhibin, Zhao Han, Yang Zhibin. Welding Process and Mechanical Properties of Laser-MIG Hybrid Welding for 6082 Aluminum Alloy[J]. APPLIED LASER, 2021, 41(6): 1168

Tools

Get Citation

Copy Citation Text

Wang Hongyang, Sun Jia, Liu Liming. Formation and Controlling Mechanism of Pores in Laser-TIG Hybrid Welding of 6061-T6 Aluminum Alloys at High Peed[J]. Chinese Journal of Lasers, 2018, 45(3): 302001

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: laser manufacturing

Received: Oct. 8, 2017

Accepted: --

Published Online: Mar. 20, 2018

The Author Email: Liming Liu (liulm@dlut.edu.cn)

DOI:10.3788/CJL201845.0302001

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology