[1] Xu Y, Xiang W L, Yang H B et al. Dynamic fracture mechanism of TC6 titanium alloy with binary morphologies[J]. Rare Metal Materials and Engineering, 44, 1924-1927(2015).

[2] Li X X, Xia C Q, Qi Y L et al. Tensilecreep behavior at high temperature of TC6 alloy[J]. Rare Metal Materials and Engineering, 42, 1901-1904(2013).

[3] Lalanne C. Mechanical vibration and shock analysis: volume 3: random vibration[J]. Caries Research, 37, 125-129(2003).

[4] Zhou J Z, Li J, Huang S et al. Influence of cryogenic treatment prior to laser peening on mechanical properties and microstructural characteristics of TC6 titanium alloy[J]. Materials Science and Engineering: A, 718, 207-215(2018).

[5] Fabbro R, Fournier J, Ballard P et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 68, 775-784(1990).

[6] Chu J P, Rigsbee J M. Bana G, et al. Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel[J]. Materials Science and Engineering: A, 260, 260-268(1999).

[7] Montross C. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International Journal of Fatigue, 24, 1021-1036(2002).

[8] Tian X L, Zhou J Z, Li J et al. Effect of cryogenic laser peening on microstructure of 2024-T351 aluminum alloy[J]. Chinese Journal of Lasers, 46, 0902004(2019).

[9] He W F, Li Y H, Li Q P et al. Vibration fatigue performance and strengthening mechanism of TC6 titanium alloy by laser shock peening[J]. Rare Metal Materials and Engineering, 42, 1643-1648(2013).

[10] Ye C, Suslov S, Lin D et al. Cryogenic ultrahigh strain rate deformation induced hybrid nanotwinned microstructure for high strength and high ductility[J]. Journal of Applied Physics, 115, 213519(2014).

[11] Hu J, Shi Y N, Sauvage X et al. Grain boundary stability governs hardening and softening in extremely fine nanograined metals[J]. Science, 355, 1292-1296(2017).

[12] Yao Q H, Yao J. Vibration fatigue in engineering structures[J]. Chinese Journal of Applied Mechanics, 23, 12-15(2006).

[13] Damir A, Elkhatib A, Nassef G. Prediction of fatigue life using modal analysis for grey and ductile cast iron[J]. International Journal of Fatigue, 29, 499-507(2007).

[14] Granato A, Lücke K. Theory of mechanical damping due to dislocations[J]. Journal of Applied Physics, 27, 583-593(1956).

[15] Nishiyama K, Matsui R, Ikeda Y et al. Damping properties of a sintered Mg-Cu-Mn alloy[J]. Journal of Alloys and Compounds, 355, 22-25(2003).

[16] González-Martínez R, Göken J, Letzig D et al. Influence of aging on damping of the magnesium-aluminium-zinc series[J]. Journal of Alloys and Compounds, 437, 127-132(2007).

[17] Watanabe H, Sasakura Y, Ikeo N et al. Effect of deformation twins on damping capacity in extruded pure magnesium[J]. Journal of Alloys and Compounds, 626, 60-64(2015).

[18] Cui Y J, Li Y P, Sun S H et al. Enhanced damping capacity of magnesium alloys by tensile twin boundaries[J]. Scripta Materialia, 101, 8-11(2015).

[19] Picu R C, Majorell A. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures: Part II: constitutive modeling[J]. Materials Science and Engineering: A, 326, 306-316(2002).

[20] Zerilli F J. Dislocation mechanics-based constitutive equations[J]. Metallurgical and Materials Transactions A, 35, 2547-2555(2004).

[21] Ye C, Suslov S, Lin D et al. Microstructure and mechanical properties of copper subjected to cryogenic laser shock peening[J]. Journal of Applied Physics, 110, 083504(2011).

[22] Cui Y J, Li J X, Li Y P et al. Damping capacity of pre-compressed magnesium alloys after annealing[J]. Materials Science and Engineering: A, 708, 104-109(2017).

[23] Somekawa H, Watanabe H, Basha D A et al. Effect of twin boundary segregation on damping properties in magnesium alloy[J]. Scripta Materialia, 129, 35-38(2017).

[24] Lu J Z, Wu L J, Sun G F et al. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts[J]. Acta Materialia, 127, 252-266(2017).

[25] Saren A, Ullakko K. Dynamic twinning stress and viscous-like damping of twin boundary motion in magnetic shape memory alloy Ni-Mn-Ga[J]. Scripta Materialia, 139, 126-129(2017).

[26] Li J, Zhou J Z, Feng A X et al. Investigation on mechanical properties and microstructural evolution of TC6 titanium alloy subjected to laser peening at cryogenic temperature[J]. Materials Science and Engineering: A, 734, 291-298(2018).