[1] GAO Fei, JI Dingcheng, WANG Junwei et al. Disbond detection and imaging using lamb waves for spacecraft honeycomb sandwich panel[J]. Spacecraft Engineering, 30, 57-63(2021).

[2] QU Z, JIANG P, ZHANG W. Development and application of infrared thermography non-destructive testing techniques[J]. Sensors, 20, 3851(2020).

[3] HOLFMANN D, BASTIAN M, SCHOBER G. New approach for layer thickness measurements of coatings using pulsed lock-in thermography[J]. Quantitative Infrared Thermography Journal, 19, 71-84(2020).

[4] FARMAKI S, EXARCHOS D A, TRAGAZIKIS I K et al. A novel infrared thermography sensing approach for rapid, quantitative assessment of damage in aircraft composites[J]. Sensors, 20, 4113(2020).

[5] HE Yunze, CHEN Qi, WANG Hongjin et al. Research progress of laser thermography non-destructive testing (invited)[J]. Infrared and Laser Engineering, 53, 20240144(2024).

[6] DENG Baoyuan, HE Yunze, WANG Hongjin et al. Monocular dynamic 3D active thermography based on joint laser scanning thermography[J]. Infrared and Laser Engineering, 53, 20240047(2024).

[7] LIU Yang, SONG Peng, LIU Xiangyue et al. All-optical laser ultrasonic detection of defects among BGA solders[J]. Infrared and Laser Engineering, 53, 20240072(2024).

[8] ZHENG Kai, JIANG Haijun, CHEN Li. Infrared thermography NDT and its development[J]. Infrared Technology, 40, 401-411(2018).

[9] WEI Jiacheng, LIU Junyan, HE Lin et al. Recent progress in infrared thermal imaging nondestructive testing technology[J]. Journal of Harbin University of Science and Technology, 25, 64-72(2020).

[10] WU Hao, LIU Zhiping, DU Yong et al. Study on damage detection of bolt holes in CFRP plate by ultrasonic infrared thermal wave imaging[J]. Infrared Technology, 41, 786-794(2019).

[11] FAVRO L D, HAN X, OUYANG Z et al. Infrared imaging of defects heated by sonic pulse[J]. Rev Sci Instrum, 71, 2418-21(2000).

[12] MI Hao, YANG Ming, YU Lei et al. Defect detection and location of based on ultrasonic infrared thermal imaging[J]. Journal of Vibration, Measurement & Diagnosis, 40, 101-106,205-206(2020).

[13] MENDIOROZ A, MARTíNEZ K, CELORRIO R et al. Characterizing the shape and heat production of open vertical cracks in burst vibrothermography experiments[J]. NDT & E International, 102, 234-243(2019).

[14] VADDI J S, LESTHAEGHE T J, HOLLAND S D. Determining heat intensity of a fatigue crack from measured surface temperature for vibrothermography[J]. Measurement Science and Technology, 31, 094007(2020).

[15] [15] LI Zan. Study on metal structure crack detection by sonic IR the effect of excitation parameters [D]. Xiangtan: Hunan University of Science Technology, 2016. (in Chinese)

[16] [16] JIANG Bin. The simulation experimental research on ultrasound infrared lockin thermography f sheet metal defect [D]. Harbin: Harbin Institute of Technology, 2012. (in Chinese)

[17] [17] GONG Jinlong. Research on the technology of CFRP laminate defect fiber ientation detection using infrared thermal wave radar imaging [D]. Harbin: Harbin Institute of Technology, 2016. (in Chinese)

[18] [18] WANG Fei. Research on infrared radar thermal wave imaging tomography f detection of defects in CFRP composite [D]. Harbin: Harbin Institute of Technology, 2020. (in Chinese)

[19] ZHANG Min, CHENG Jiaxing, FAN Fuhua et al. Study on the problems in extracting instantaneous characters of signals based on Hilbert transform[J]. Telecommunication Engineering, 44-48(2003).

[20] [20] ZHAO Xin. Fault diagnosis technology f chemical industry process based on statistical methods [D]. Harbin: Harbin Institute of Technology, 2008. (in Chinese)