Research on Permeability Mechanism of 3D Printed Permeable Steel by Selective Laser Melting

Liangliang Zhang; Minjie Wang; Hongxia Li; Jianye Liu; Jinhai Wang; Liuhui Niu

doi:10.3788/CJL240464

Chinese Journal of Lasers, Volume. 51, Issue 20, 2002303(2024)

Research on Permeability Mechanism of 3D Printed Permeable Steel by Selective Laser Melting

Liangliang Zhang¹, Minjie Wang^1、*, Hongxia Li¹, Jianye Liu², Jinhai Wang², and Liuhui Niu²

¹State Key Laboratory of High-Performance Precision Manufacturing, School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, Liaoning , China

²Guangdong Hanbang 3D Tech Co., Ltd., Zhongshan 528427, Guangdong , China

show less

Abstract Get PDF(in Chinese)

References(32)

[1] Liu B Y, Wang X M, Yang G et al. Research progress on topology optimization design for metal additive manufacturing[J]. Chinese Journal of Lasers, 50, 1202301(2023).

[2] Fang L J, Sun B B, Zhang Q et al. Structural design and analysis of selective laser melting forming parts[J]. Laser & Optoelectronics Progress, 60, 0514010(2023).

[3] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[4] Feng Z Y, Ma J W, Qi S et al. Effect of pore defects on tensile properties of Al-Mg-Sc-Zr alloy formed by selective laser melting[J]. Laser & Optoelectronics Progress, 60, 0714004(2023).

[5] Shi Y, Wei D S. Lack-of-fusion porosity defects formation mechanism in laser powder bed fusion additive manufacturing[J]. Chinese Journal of Lasers, 50, 2002303(2023).

[6] Westhoff D, Skibinski J, Šedivý O et al. Investigation of the relationship between morphology and permeability for open-cell foams using virtual materials testing[J]. Materials & Design, 147, 1-10(2018).

[7] Tian C C, Li X K, Zhang S B et al. Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)[J]. The International Journal of Advanced Manufacturing Technology, 100, 1451-1462(2019).

[8] Kuo C C, Yang X Y. Optimization of direct metal printing process parameters for plastic injection mold with both gas permeability and mechanical properties using design of experiments approach[J]. The International Journal of Advanced Manufacturing Technology, 109, 1219-1235(2020).

[9] Ibrahim S H, Skibinski J, Oliver G J et al. Microstructure effect on the permeability of the tape-cast open-porous materials[J]. Materials & Design, 167, 107639(2019).

[10] Mirzaei M, Paydar M H. A novel process for manufacturing porous 316L stainless steel with uniform pore distribution[J]. Materials & Design, 121, 442-449(2017).

[11] Baghtifouni E K, Monazzah A H. Longitudinal graded porous titanium fabricated by spark plasma sintering: design of layers, direction of crack path[J]. Journal of Manufacturing Processes, 81, 738-747(2022).

[12] Resnina N, Rubanik V, Kulak M et al. Influence of the Ar pressure on the structure of the NiTi foams produced by self-propagating high-temperature synthesis[J]. Materials Letters, 299, 130047(2021).

[13] Zheng M, Yang J, Zhang H. Review on preparation and applications of porous metal materials[J]. Materials Reports, 36, 78-93(2022).

[14] Liang J Y, Zhang W Y, Liu W et al. Laser additive manufacturing and heat transfer performance measurement of lattice structure heat exchanger[J]. Chinese Journal of Lasers, 50, 0402014(2023).

[15] Furumoto T, Koizumi A, Alkahari M R et al. Permeability and strength of a porous metal structure fabricated by additive manufacturing[J]. Journal of Materials Processing Technology, 219, 10-16(2015).

[16] Xie D X, Dittmeyer R. Correlations of laser scanning parameters and porous structure properties of permeable materials made by laser-beam powder-bed fusion[J]. Additive Manufacturing, 47, 102261(2021).

[17] Fogliatto A A B, Ahrens C H, Wendhausen P A P et al. Correlation between porosity and permeability of stainless steel filters with gradient porosity produced by SLS/SLM[J]. Rapid Prototyping Journal, 26, 73-81(2020).

[18] Zeng G H, Song T, Dai Y H et al. 3D printed breathable mould steel: Small micrometer-sized, interconnected pores by creatively introducing foaming agent to additive manufacturing[J]. Materials & Design, 169, 107693(2019).

[19] Vanmunster L, D’Haeyer C, Coucke P et al. Mechanical behavior of Ti6Al4V produced by laser powder bed fusion with engineered open porosity for dental applications[J]. Journal of the Mechanical Behavior of Biomedical Materials, 126, 104974(2022).

[20] Wang L, Guo K, Cong J Q et al. Effect of process parameters on defect in selective laser melting of 316L stainless steel[J]. Laser & Optoelectronics Progress, 60, 0514007(2023).

[21] Promoppatum P, Yao S C, Pistorius P C et al. A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of inconel 718 products made by laser powder-bed fusion[J]. Engineering, 3, 685-694(2017).

[22] Tang M, Pistorius P C, Beuth J L. Prediction of lack-of-fusion porosity for powder bed fusion[J]. Additive Manufacturing, 14, 39-48(2017).

[23] Hommel J, Coltman E, Class H. Porosity–permeability relations for evolving pore space: a review with a focus on (bio-) geochemically altered porous media[J]. Transport in Porous Media, 124, 589-629(2018).

[24] Ghanbarian B, Hunt A G, Ewing R P et al. Tortuosity in porous media: a critical review[J]. Soil Science Society of America Journal, 77, 1461(2013).

[25] Wu J S, Yu B M, Yun M J. A resistance model for flow through porous media[J]. Transport in Porous Media, 71, 331-343(2008).

[26] Rodriguez E, Giacomelli F, Vazquez A. Permeability-porosity relationship in RTM for different fiberglass and natural reinforcements[J]. Journal of Composite Materials, 38, 259-268(2004).

[27] Guan K, Wang Z M, Gao M et al. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel[J]. Materials & Design, 50, 581-586(2013).

[28] Wang Z M, Guan K, Gao M et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting[J]. Journal of Alloys and Compounds, 513, 518-523(2012).

[29] Tian X X, Zhao Z, Wang H B et al. Progresses on the additive manufacturing of functionally graded metallic materials[J]. Journal of Alloys and Compounds, 960, 170687(2023).

[30] Dhinakar A, Li B E, Chang Y C et al. Air permeability of maraging steel cellular parts made by selective laser melting[J]. Materials, 14, 3118(2021).

[31] Tang H P, Qian M, Liu N et al. Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting[J]. Journal of the Minerals, 67, 555-563(2015).

[32] Li S C, Mo B, Xiao G et al. Microstructure characteristics and their influence factors during laser additive manufacturing of metal materials[J]. Laser & Optoelectronics Progress, 58, 0100007(2021).

Tools

Get Citation

Copy Citation Text

Liangliang Zhang, Minjie Wang, Hongxia Li, Jianye Liu, Jinhai Wang, Liuhui Niu. Research on Permeability Mechanism of 3D Printed Permeable Steel by Selective Laser Melting[J]. Chinese Journal of Lasers, 2024, 51(20): 2002303

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Additive Manufacturing

Received: Jan. 5, 2024

Accepted: Mar. 4, 2024

Published Online: Oct. 12, 2024

The Author Email: Wang Minjie (mjwang@dlut.edu.cn)

DOI:10.3788/CJL240464

CSTR:32183.14.CJL240464

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology