[1] [1] Li Gangqing, Han Xiaohui. Welding process and development of stainless steel car body[J]. Locomotive and Rolling Stock Technology, 2004, (1): 1-4.

[2] [2] Du Haixian, Xu Feng, Hong Liu, et al.. Development of SUS301L cold rolled stainless steel products[J]. World Iron and Steel, 2010, (6): 52-54.

[3] [3] Wu Maoguo, Liu Wei, Fan Meng, et al.. Microstructure and mechanical properties of resistance spot welding joint of SUS301L plate[J]. J Beijing Jiaotong University, 2005, 29(4): 104-106.

[4] [4] Ding Chenggang, Shi Chunyuan, Du Bengang, et al.. Study on spot welding process of stainless steel SUS301L[J]. Hot Working Technology, 2006, 35(11): 28-29.

[5] [5] Wang Hongxiao, Shi Chunyuan, Wang Chunsheng, et al.. Study on laser welding process for stainless steel railway vehicle[J]. Hot Working Technology, 2009, 38(19): 136-139.

[6] [6] Wang H X, Wang C S, Shi C Y. The investigation of partial penetration lap laser welding applied on stainless steel railway vehicles[J]. Advanced Materials Research, 2010, 97-101: 3832-3835.

[7] [7] Liu J. Study of laser lap welding of SUS301L austenitic stainless steel using optimal design method[J]. Rare Metal Materials and Engineering, 2011, 40(4): 63-67.

[8] [8] Han Fang, Lu Peide. The manufacture technology for side wall of the stainless steel car body structure[J]. Rolling Stock, 2000, 38(6): 22-24.

[9] [9] Zeng Xiaoyan, Gao Ming, Yan Jun. Effects of shielding gas in laser-arc hybrid welding[J]. Chinese J Lasers, 2011, 38(6): 0601005.

[10] [10] Zhao Yaobang, Lei Zhenglong, Chen Yanbin. Analysis of melting characteristics of laser-arc double sided welding for stainless steel[J]. Chinese J Lasers, 2011, 38(2): 0203001.

[11] [11] S B Hee, S B Han, C K You, et al.. A study on mechanical and microstructure characteristics of the STS30L butt joints using hybrid CO2 laser-gas metal arc welding[J]. Materials and Design, 2011, 32(4): 2328-2333.

[12] [12] P Sathiya, K M Mahendra, B Shanmugarajan. Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding[J]. Materials and Design, 2012, 33(1): 203-212.

[13] [13] B Hu, G D Ouden. Laser induced stabilization of the welding arc[J]. Science and Technology of Welding and Joining, 2005, 10(1): 76-81.

[14] [14] Kutsuna G, Liang Chen. Interaction of both plasmas in CO2 laser-MAG hybrid welding of carbon steel[C]. SPIE, 2003, 4831: 341-346.

[15] [15] Rao Z H, Liao S M, Tsai H L. Modelling of hybrid laser-GMA welding: review and challenges[J]. Science and Technology of Welding and Joining, 2011, 16(4): 300-305.

[16] [16] Chen Yang, Wu Shikai, Xiao Rongshi. Study on CO2-MIG hybrid welding of SUS301L stainless steel sheet[J]. Applied Laser, 2013, 33(2): 158-163.

[17] [17] Kamiya O, Kumagal K, Kikuchi Y. The effects of δ ferrite morphology on low temperature fracture toughness of austenitic stainless steel weld metal[J]. Quarterly J Japan Welding Society, 1991, 9(4): 61-67.

[18] [18] J C Lippold, W F Savage. Solidification of austenitic stainless steel weldments[J]. Welding Journal, 1979, 58(12): 362-374.

[19] [19] J C Lippold, D J Kotecki. Welding Metallurgy and Weldability of Stainless Steels[M]. New York: John Wiley & Sons Inc., 2005. 153-162.

[20] [20] W Kurz, D J Fisher. Dendrite growth at the limit of stability: tip radius and spacing[J]. Acta Metallurgica, 1981, 29(1): 11-20.

[21] [21] J C Lippold. Solidification behavior and cracking susceptibility of pulsed-laser welds in austenitic stainless steels[J]. Welding Journal, 1994, 73(6): 129-139.

[22] [22] D J Kotecki, T A Siewert. WRC-1992 constitution diagram for stainless steel weld metals: a modification of the WRC-1988 diagram[J]. Welding Journal, 1992, 71(5): 171-178.

[23] [23] J A Brooks, J C Williams, A W Thompson. STEM analysis of primary austenite solidified stainless steel welds[J]. Metallurgical Transactions A, 1983, 14(1): 23-31.

[24] [24] N Lewis, M J Cieslak, W F Savage. Microsegregation and eutectic ferrite-to-austenite transformation in primary austenite solidified CF-8M weld metals[J]. J Materials Science, 1987, 22(8): 2799-2810