[3] [3] KIM W R, BANG G B, KWON O, et al. Fabrication of porous pure titanium via selective laser melting under low-energy-density process conditions［J］. Materials & Design, 2020, 195: 109035.

[4] [4] JAFARI D, WITS W W, VANEKER T H J, et al. Pulsed mode selective laser melting of porous structures: Structural and thermophysical characterization［J］. Additive Manufacturing, 2020, 35: 101263.

[5] [5] SUZUKI A, MIYASAKA T, TAKATA N, et al. Control of microstructural characteristics and mechanical properties of AlSi12 alloy by processing conditions of laser powder bed fusion［J］. Additive Manufacturing, 2021, 48: 102383.

[6] [6] PRASHANTH K G, SCUDINO S, ECKERT J. Defining the tensile properties of Al-12Si parts produced by selective laser melting［J］. Acta Materialia, 2017, 126: 25-35.

[7] [7] SIDDIQUE S, IMRAN M, WYCISK E, et al. Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting［J］. Journal of Materials Processing Technology, 2015, 221: 205-213.

[8] [8] WANG X J, ZHANG L C, FANG M H, et al. The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy［J］. Materials Science and Engineering: A, 2014, 597: 370-375.

[9] [9] KANG N, CODDET P, DEMBINSKI L, et al. Microstructure and strength analysis of eutectic Al-Si alloy in situ manufactured using selective laser melting from elemental powder mixture［J］. Journal of Alloys and Compounds, 2017, 691: 316-322.

[11] [11] SU X B, YANG Y Q. Research on track overlapping during selective laser melting of powders［J］. Journal of Materials Processing Technology, 2012, 212(10): 2074-2079.

[13] [13] TANG M, PISTORIUS P C, BEUTH J L. Prediction of lack-of-fusion porosity for powder bed fusion［J］. Additive Manufacturing, 2017, 14: 39-48.

[14] [14] HU Z H, QI Y, NAGARAJAN B, et al. Top surface roughness evolution during selective laser melting of AlCu5MnCdVA aluminum alloy［J］. Journal of Manufacturing Processes, 2021, 64: 1180-1195.

[15] [15] GUAN K, WANG Z M, GAO M, et al. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel［J］. Materials & Design, 2013, 50: 581-586.

[17] [17] GU D D, HAGEDORN Y C, MEINERS W, et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium［J］. Acta Materialia, 2012, 60(9): 3849-3860.

[18] [18] YIN J, ZHANG W Q, KE L D, et al. Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu-10Zn alloy［J］. International Journal of Machine Tools and Manufacture, 2021, 161: 103686.

[19] [19] ZAVALA-ARREDONDO M, LONDON T, ALLEN M, et al. Use of power factor and specific point energy as design parameters in laser powder-bed-fusion (L-PBF) of AlSi10Mg alloy［J］. Materials & Design, 2019, 182: 108018.

[20] [20] HOJJATZADEH S M H, PARAB N D, YAN W T, et al. Pore elimination mechanisms during 3D printing of metals［J］. Nature Communications, 2019, 10(1): 3088.

[21] [21] MANICA R, KLASEBOER E, CHAN D Y C. The hydrodynamics of bubble rise and impact with solid surfaces［J］. Advances in Colloid and Interface Science, 2016, 235: 214-232.

[22] [22] DELNOIJ E, LAMMERS F A, KUIPERS J A M, et al. Dynamic simulation of dispersed gas-liquid two-phase flow using a discrete bubble model［J］. Chemical Engineering Science, 1997, 52(9): 1429-1458.

[23] [23] YOUNG N O, GOLDSTEIN J S, BLOCK M J. The motion of bubbles in a vertical temperature gradient［J］. Journal of Fluid Mechanics, 1959, 6: 350-356.

[24] [24] HU Z H, ZHANG H, ZHU H H, et al. Microstructure, mechanical properties and strengthening mechanisms of AlCu5MnCdVA aluminum alloy fabricated by selective laser melting［J］. Materials Science and Engineering: A, 2019, 759: 154-166.

[25] [25] PRASHANTH K G, SCUDINO S, KLAUSS H J, et al. Microstructure and mechanical properties of Al12Si produced by selective laser melting: Effect of heat treatment［J］. Materials Science and Engineering: A, 2014, 590: 153-160.