[1] [1] Huang Weidong, Li Yanmin, Feng Liping et al.. Laser solid forming of metal powder materials [J]. J. Materials Engineering, 2002, (3): 40～43

[2] [2] Zhu Juanfang, GaoBo, Wang Zhongyi et al.. Properties of pure titanium for dental implants fabricated by rapid laser forming [J]. Chinese J. Lasers, 2007, 34(4): 588～592

[3] [3] Dirk A. Hollander, Matthias von Walter, Tobias Wirtz et al.. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming [J]. Biomaterials, 2006, 27(7): 955～963

[4] [4] WuJiang, GaoBo, TanHua et al.. Titanium base of complete denture fabricated with laser rapid forming [J]. Chinese J. Lasers, 2006, 33(8): 1139～1142

[5] [5] Han Yanfeng, GaoBo, HuJiang et al.. Titanium coping fabricated with laser rapid forming [J]. Chinese J. Lasers, 2007, 34(6): 876～880

[6] [6] R.C. Bennett, Ch.Sutcliffe. Selective laser melting-applications and developments using MCP RealizerSLM\[C\]. Proceedings of the Fourth Laser Assisted Net Shape Engineering, LANE, 2004, 1: 545

[7] [7] Nadine Coulon, Pascal Aubry, Patrick Teulet et al.. New trends in laser sintering: analysis of the process and new applications [C]. Laser Materials Processing Conference, 2005, 286～295

[8] [8] T. Akova, Y. Ucara, A. Tukayb et al..Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain [J].Dent Mater, 2008, 24(10): 1400～1404

[9] [9] International Organization for Standardization.ISO9693: metal-ceramic dental restorative systems[S]. 1999

[10] [10] Ren Weihong, Guo Tianwen. Analysis of effect factors to bond strength between titanium and porcelain[J].Chin. J. Stomatol., 2000, 35(4): 309～311

[11] [11] J. Lenz, S. Schwarz, H. Schwickerath et al.. Thermal stresses in metal-ceramic specimens for the ISO crack initiation test (three-point flexure bend test) [J]. Dent Mater, 1998, 14(4): 277～280

[12] [12] T. R. Walton, W. J. O′Brien. Thermal stress failure of porcelain bonded to a palladium-silver alloy [J]. J. Dent Res., 1985, 64(3): 476～480

[13] [13] H. Yilmaz, C. Dincer. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain [J]. J. Dent, 1999, 27(3): 215～222

[14] [14] M. Kononen, J. Kivilahti. Bonding of low fusing dental porcelain to commercially pure titanium [J]. J. Biomed Mater Res., 1994, 28(9): 1027～1035

[15] [15] J. Lenz, S. Schwarz, H. Schwickerath. et al.. Bond strength of metal-ceramic systems in three-point flexure bond test [J]. J. Appl. Biomat., 1995, 6(1): 55～64