[1] Sun Fei, Zhang Dongqiao, Cheng Ling, et al. Microstructure evolution modeling and simulation for dynamic recrystallization of Cr₁₂MoV die steel during hot compression based on real metallographic image[J]. Metals and Materials International, 25, 966-981(2019).

[2] Abdulhadi H A, Aqida S N, Ishak M, et al. Thermal fatigue of die-casting dies: an overview[J]. MATEC Web of Conferences, 74, 00032(2016).

[3] Hong Sheng, Wu Yuping, Wang Bo, et al. Improvement in tribological properties of Cr₁₂MoV cold work die steel by HVOF sprayed WC-CoCr cermet coatings[J]. Coatings, 9, 825(2019).

[4] Courant B, Hantzpergue J J, Benayoun S. Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction[J]. Wear, 236, 39-46(1999).

[5] Liu Shenglin, Zheng Xueping, Geng Gangqiang. Dry sliding wear behavior and corrosion resistance of NiCrBSi coating deposited by activated combustion-high velocity air fuel spray process[J]. Materials & Design, 31, 913-917(2010).

[6] Liu Yanan, Ding Ye, Yang Lijun, et al. Research and progress of laser cladding on engineering alloys: a review[J]. Journal of Manufacturing Processes, 66, 341-363(2021).

[7] Huang Lei, Zhou Jianzhong, Xu Jiale, et al. Microstructure and wear resistance of electromagnetic field assisted multi-layer laser clad Fe901 coating[J]. Surface and Coatings Technology, 395, 125876(2020).

[8] Ye Hong, Peng Shixin, Yan Zhonglin, et al. Microstructure and properties of laser cladding Fe-Al intermetallics[J]. Advanced Materials Research, 659, 39-42(2013).

[9] Bourahima F, Helbert A L, Rege M, et al. Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: Influence of the process parameters on bonding quality and coating geometry[J]. Journal of Alloys and Compounds, 771, 1018-1028(2019).

[10] Quazi M M, Fazal M A, Haseeb A S M A, et al. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: a review[J]. Journal of Rare Earths, 34, 549-564(2016).

[11] Zou Honghui, Zeng Xiaoqin, Zhai Chunquan, et al. Effects of ND on the microstructure and mechanical property of ZA52 alloy[J]. Materials Science Forum, 488/489, 161-164(2005).

[12] Pang Ming, Liu Quanxiu. Simulation study on morphology control of interface to composite coatings of neodymium and nickel-based alloy applied by plasma spraying and laser on super-strength steel[J]. Hot Working Technology, 50, 111-116(2021).

[13] Feng Xiaoli, Wang Haifeng, Liu Xuechao, et al. Effect of Al content on wear and corrosion resistance of Ni-based alloy coatings by laser cladding[J]. Surface and Coatings Technology, 412, 126976(2021).

[14] Jiang Huiren, Hirohasi M, Lu Yun, et al. Effect of Nb on the high temperature oxidation of Ti–(0–50 at. %) Al[J]. Scripta Materialia, 46, 639-643(2002).

[15] Ansara I, Dupin N, Lukas H L, et al. Thermodynamic assessment of the Al-Ni system[J]. Journal of Alloys and Compounds, 247, 20-30(1997).

[16] Wang Di, Song Changhui, Yang Yongqiang, et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts[J]. Materials & Design, 100, 291-299(2016).

[17] Yuan Tao, Cai Yangchuan, Luo Zhen, . Effect of Al₂O₃ composite ceramic reinforcement on wear behavior of laser cladding Ni-based alloys coatings[J]. Journal of Shanghai Jiaotong University, 50, 1635-1639(2016).

[18] [18] Singh K, Sharma S. Effect of rare earth on microstructure wear behaviour of Ni based microwave clad[J]. Indian Journal of Engineering Materials Sciences 2020, 27(3): 564572.

[19] Yu Youjun, Zhou Jiansong, Chen Jianmin, et al. Preparation, microstructure and tribological properties of Ni₃Al intermetallic compound coating by laser cladding[J]. Intermetallics, 18, 871-876(2010).

[20] Jerred N D, Khanal R, Benson M T, et al. Nd, SbNd and Sb₃Nd₄ and their interactions with the cladding alloy HT9[J]. Journal of Nuclear Materials, 541, 152387(2020).

[21] Mirzadeh H. Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy[J]. Journal of Materials Research and Technology, 5, 1-4(2016).

[22] Pagounis E, Lindroos V K, Talvitie M. Influence of matrix structure on the abrasion wear resistance and toughness of a hot isostatic pressed white iron matrix composite[J]. Metallurgical and Materials Transactions A, 27, 4183-4191(1996).