[1] Wang H, Wu M P, Lu P P et al. Effect of laser power on mechanical properties of the cobalt-based/GO composite coatings[J]. Laser & Optoelectronics Progress, 57, 091405(2020).

[2] Li J F, Wei Z Y, Lu B H. Research progress on technology of selective laser melting of titanium and titanium alloys[J]. Laser & Optoelectronics Progress, 55, 011403(2018).

[3] Zou S[J]. Patent analysis of titanium alloy welding gas protection technology Chemical Enterprise Management, 2018, 23-25.

[4] Zhou Q J, Yan Z Y, Han X et al. Microstructure and mechanical properties of laser melting deposited TC11 titanium alloys[J]. Chinese Journal of Lasers, 45, 1102005(2018).

[5] Huo H, Liang Z Y, Zhang A F et al. Anisotropy of mechanical properties of laser-cladding-deposited TC4 titanium alloy containning boron[J]. Chinese Journal of Lasers, 46, 1202008(2019).

[6] Li G, Zhang J C, Shi S H et al. Mass distribution of local shielding gas for laser cladding of titanium alloy in open environment[J]. Chinese Journal of Lasers, 46, 0702007(2019).

[7] Bermingham M J, Thomson-Larkins J. St John D H, et al. Sensitivity of Ti-6Al-4V components to oxidation during out of chamber wire+arc additive manufacturing[J]. Journal of Materials Processing Technology, 258, 29-37(2018). http://smartsearch.nstl.gov.cn/paper_detail.html?id=cf0fb2b52761e4a5f1c8684bbe1fd130

[8] Zhang J C, Shi T, Li G et al. Oxidation of TC4 titanium alloy processed by laser inside powder feeding technology in open environment[J]. Surface Technology, 49, 243-251(2020).

[9] Shi S H, Fu G Y, Wang A J et al. -03-26[P]. inner-light powder-supplying spray head: CN101148760.(2008).

[10] Liu H N, Liu J[M]. Hydrodynamics, 150-152(2015).

[11] Ding J, Colegrove P, Martina F et al. Development of a laminar flow local shielding device for wire + arc additive manufacture[J]. Journal of Materials Processing Technology, 226, 99-105(2015). http://www.onacademic.com/detail/journal_1000038346126810_3e60.html

[12] Zou S. Study on gas shielding technology for titanium alloys laser welding[D]. Harbin: Harbin Institute of Technology, 28-53(2016).

[13] Karpagaraj A, Siva Shanmugam N, Sankaranarayanasamy K. Experimental investigations and numerical prediction on the effect of shielding area and post flow time in the GTAW of CP Ti sheets[J]. The International Journal of Advanced Manufacturing Technology, 101, 2933-2945(2019). http://link.springer.com/article/10.1007/s00170-018-3135-y

[14] Zhang Y, Huang W Y, Wu M X et al. The application of Origin in the nonlinear fitting of the standard curve of AAS[J]. Computers and Applied Chemistry, 33, 1289-1294(2016).

[15] Yan R, Li H, Li J C et al. Process parameters optimization of polystyrene powder selective laser sintering based on response surface methodology[J]. Chinese Journal of Lasers, 46, 0302015(2019).

[16] Zhang C, Zhang F L, Li Y F et al. Multivariate nonlinear regression analysis model of weld bead shaping of 50CrV steel by laser welding with filler wire[J]. Acta Armamentarii, 39, 2256-2266(2018).