[1] [1] Y. S. Tian, C. Z . Chen, L. X. Chen et al.. Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying technique［J］. Scripta Materialia, 2006, 54(5): 847～852

[2] [2] Zhang Wenguang, Wang Chengtao, Liu Weimin. Tribological behavior of surface-modified layers on Ti alloy［J］. Tribology, 2003, 23(2): 91～94

[3] [3] B. Courant, J. Hantzpergue, S. Benayoun. Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction［J］. Wear, 1999, 236(1-2): 39～46

[4] [4] Ani Zhecheva, Wei Sha, Savko Malinov et al.. Enhancing the microstructure and properties of titanium alloy through nitriding and other surface engineering methods［J］. Surface and Coatings Techaology, 2005, 200(7): 2192～2207

[5] [5] Han Xiuxun, Yan Pengxun, Yan Fengyuan et al.. Structure and tribological properties of TiN coatings deposited with two different PVD methods［J］. Tribology, 2002, 22(3): 175～178

[6] [6] Liang Jing, Gao Mingyuan, Liu Changsheng et al.. Laser Induced in-situ formation of titanium composite coatings［J］. Chinese J. Lasers, 2009, 36(12): 3272～3276

[7] [7] Wang Weifu, Sun Fengjiu, Wang Maocai. Laser cladding Ni based Tribaloy 700 coatings on TA2 titanium alloy［J］. Chinese J. Lasers, 2007, 34(12): 1710～1715

[8] [8] Sun Ronglu, Liu Zhiyong, Niu Wei et al.. Influence of Ti substrate dilution on the microstructure of NiCrBSiC laser clad coatings［J］. Chinese J. Lasers, 2008, 35(11): 1741～1745

[9] [9] P. Jiang, X. L. He, X. X. Li et al.. Wear resistance of a laser surface alloyed Ti-6Al-4V alloy［J］. Surface and Coating Technology, 2000, 130(1): 24～28

[10] [10] Liu Changjiu, Chen Suiyuan, Shang Lijuan. Microstructure and property of laser gas Ni triding on γ-TiAl alloy［J］. Chinese J. Lasers, 2002, A29(3): 277～280

[11] [11] H. Xin, C. Hu, L. M. Watson et al.. Anlysis of the phases developed by laser nitriding Ti-6Al-4V alloys［J］. Acta Materialia, 1997, 45(10): 4311～4322

[12] [12] M. G. Pérez, N. R. Harlan, F. Zapirain et al.. Laser nitriding of an intermetallic TiAl alloy with a diode laser［J］. Surface & Coatings Technology, 2006, 200(16-17): 5152～5159

[13] [13] J. H. Abboud, A. F. Fidel, K. Y. Benyounis. Surface nitriding of Ti-6Al-4V alloy with a high power CO2 laser［J］. Optics & Laser Technology, 2008, 40(2): 405～414

[14] [14] Mohmad Soib Selamat, T. N. Baker, L. M. Watson. Study of the surface layer formed by the laser processing of Ti-6Al-4V alloy in a dilute nitrogen environment［J］. Journal of Material Processing Technology, 2001, 113(1-3): 509～515

[15] [15] B. S. Yilbas, M. S. J. Hashmi. Laser treatment of Ti-6A1-4V alloy prior to plasma nitriding［J］. Journal of Materials Processing Technology, 2000, 103(2): 304～309

[16] [16] Fan Ding, Dai Jingjie, Sun Yaoning et al.. Laser gas nitriding of commercial pure titanium TA2［J］. Journal of Lanzhou University of Technology, 2006, 32(3): 1～3

[17] [17] L. Covelli, F. Pierdominici, I. Smurov et al.. Surface microstructure of titanium irradiated by NdYAG pulsed laser in present of carbon and nitrogen［J］. Surface and Coating Technology, 1996, 78(1-3): 196～204

[18] [18] B. S. Yilbas, M. S. J. Hashmi. Laser treatment of Ti-6Al-4V alloy prior to plasma nitriding［J］. Journal of Materials Processing Technology, 2000, 103(2): 304～309

[19] [19] M. Guemmaz, A. Mosser, J. J. Grobet. Ion implantation processing of sub-stoichiometric titanium nitrides and carbonitrides: chemical structural and micromechanical investigations［J］ . Appl. Phys. A., 1997, 64(4): 407～415

[20] [20] M. Wittling, A. Bendavid, P. J. Martin et al.. Influence of thickness and substrate on the hardness and deformation of TiN film［J］ . Thin Solid Films, 1995, 270(1-2): 283～288

[21] [21] S. Gorsse, Y. L. Petitcorps, S. Matar. Investigation of the Young′s modulus of TiB needles in situ produced in titanium matrix composite［J］ . Mater Sci. Eng. A., 2003, 340(1-2): 80～87

[22] [22] Jin Yongji, Shao Tianmin, Yin Liang et al.. Investigation on surface nitridation of titanium by pulsed laser［J］ . Journal of Materials Engineering, 2006, (1): 53～56

[23] [23] S. P. Wen, R. L . Zong, F. Zeng et al.. Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers［J］. Appl. Surf. Sci., 2009, 255(8): 4558～4562

[24] [24] A. Leyland, A. Matthews. On the significance of the H/E ratio in wear control: A nanocomposite approach to optimised tribological behaviour［J］. Wear, 2000, 246(1-2): 1～11

[25] [25] Ni Wangyang, Cheng Yang-Tse, J. Lukitsch Michael et al.. Effects of the ratio of hardness to Young′s modulus on the friction and wear behavior of bilayer coatings［J］. Appl. Phys. Lett., 2004, 85(18): 4028～4030

[26] [26] Fan Ailan, Qin Yanmei, Qin Lin et al.. Structure and corrosion behavior of Mo modified layer on Ti-6Al-4V alloy with plasma surface alloying technique［J］. Jounal of Chinese Society Corrosion and Protecting, 2007, 27(1): 31～34

[27] [27] Hu Hongjuan, Qin Yanmei, Fan Ailan et al.. Electrochemical behavior of Mo-N modified layer on pure titanium with plasma surface alloying technique［J］. Rare Metals Letters, 2005, 24(11): 21～24