[1] [1] XU J S, ZHANG X C, XUAN F Z, et al. Rolling contact fatigue behavior of laser cladded WC/Ni composite coating［J］. Surface & Coatings Technology, 2014, 239:7-15.

[2] [2] LI F Q, FENG X Y, CHEN Y B. Influence of WC content on microstructure of WC/Ni60A laser cladding layer［J］. Chinese Journal of Lasers, 2016, 43(4): 0403009(in Chinese).

[3] [3] LI J N, LIU K G, ZHANG Y B, et al. Laser cladding technology and application［M］. Beijing: Beijing Industry Press, 2015:109-110(in Chinese).

[4] [4] SHU D, LI Z G, ZHANG K, et al. In situ synthesized high volume fraction WC reinforced Ni-based coating by laser cladding［J］. Materials Letters, 2017, 195: 178-181.

[5] [5] ZHIKUN W, AIHUA W,XUHAO W, et al. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures［J］. Surface & Coatings Technology, 2016, 304:283-292.

[6] [6] LEE C, PRAK H, YOO J, et al. Residual stress and crack initiation in laser clad composite layer with Co-based alloy and WC + NiCr［J］. Applied Surface Science, 2015, 345: 286-294.

[7] [7] SHI Y, LI Y, LIU J, et al. Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel［J］. Optics & Laser Technology, 2018, 99: 256-270.

[8] [8] MA Q Sh, LI Y J, WANG J, et al. Microstructure evolution and growth control of ceramic particles in wide-band laser clad Ni60/WC composite coatings［J］. Materials & Design, 2016, 92: 897-905.

[9] [9] WU P F. Research on laser cladding repairing cutter pulverizer［D］. Guangzhou: Guangdong University of Technology, 2019:46-48(in Chinese).

[10] [10] SONG L J, ZENG G Ch, XIAO H, et al. Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders［J］. Journal of Manufacturing Processes, 2016, 24: 116-124.

[11] [11] ZHOU Sh F, LEI J B, DAI X Q, et al. A comparative study of the structure and wear resistance of NiCrBSi/50 wt% WC composite coatings by laser cladding and laser induction hybrid cladding［J］. Journal of Refractory Metals and Hard Materials, 2016, 60:17-27.

[12] [12] L Y H, LI J, TAOY F, et al. High-temperature wear and oxidation behaviors of TiNi/Ti2Ni matrix composite coatings with TaC addition prepared on Ti6Al4V by laser cladding［J］. Applied Surface Science, 2017, 402: 478-494.

[13] [13] YOU Ch Ch, XIAO H Q, REN L R, et al. Microstructure and properties of laser cladding Ti-Al-N composite coating on TC4 surface［J］. Laser Technology, 2021, 45(5): 585-589(in Chinese).

[14] [14] WU Z P. Study on crack and porosity control methods of laser cladding Ni60A alloy coating［D］. Daliang: Dalian University of Technology, 2019:41-43(in Chinese).

[15] [15] CHEN Z H, SUN W L, HUANG Y, et al. Study on microstructure and properties of laser cladding coating for base superalloy［J］. Laser Technology, 2021, 45(4): 441-447(in Chinese).

[16] [16] JO T S, LIM J H, KIM Y D. Dissociation of Cr-rich M23C6 carbide in alloy 617 by severe plastic deformation［J］. Journal of Nuclear Materials, 2010, 406(3): 360-364.

[17] [17] IMURAI S, THANACHAYANONTT C, PEARCE J, et al. Effects of W on microstructure of as-cast 28wt%Cr-2.6wt%C-(0-10)wt%W irons［J］. Materials Characterization, 2015, 99:52-60.

[18] [18] HIROTA K, MITANI M K, YAMAGUCHI O. Simultaneous synthesis and consolidation of chromium carbides (Cr3C2, Cr7C3 and Cr23C6) by pulsed electric-current pressure sintering［J］. Materials Science and Engineering, 2005, A399(1/2):154-160.

[19] [19] WANG D, ZHANG J, LOU L H. Formation and stability of nano-scaled M23C6 carbide in a directionally solidified Ni-base superalloy［J］. Materials Characterization, 2009, 60 (12): 1517-1521.