Advanced Photonics Nexus, Volume. 2, Issue 3, 036009(2023)

Deep image prior plus sparsity prior: toward single-shot full-Stokes spectropolarimetric imaging with a multiple-order retarder

Feng Han, Tingkui Mu*, Haoyang Li, and Abudusalamu Tuniyazi
Author Affiliations
  • Xi’an Jiaotong University, School of Physics, MOE Key Laboratory for Non-equilibrium Synthesis and Modulation of Condensed Matter, Xi’an, China
  • show less
    Figures & Tables(17)
    Schematic of the SPI framework with the passive SR-PM scheme. (a) Imaging formation by integrating the SR-PM with general spectrometer. (b) Forward mathematical model with different colors indicating different spectral bands. (c) Combined sparse representations in transform domain to achieve faster convergence. (d) Untrained network acts as implicit regularization and generator. (e) The reconstruction method is transferred from the CS method with apparent regularization and manual fine-tuning to the unconstrained DIP that uses an untrained network without manual tuning regularization, then to the DIP-SP with the sparse representation constraint and self-calibration ability, which achieves the best performance.
    Processing pipeline of the proposed DIP-SP method.
    Simulated results for the reconstructed images of full-Stokes parameters (S0, S1, S2, and S3) at the spectral band of 550 nm from different algorithms: TwIST-TV, TwIST-SP, DIP, and DIP-SP under the two noise levels (σ=0.05 and σ=0.2). Average PSNR and SSIM relative to the GT over all 100 spectral bands are presented just below each image.
    Simulated results (TwIST-TV, green dashed-dotted line; TwIST-SP, blue dashed line; DIP, purple dotted line; DIP-SP, red star-marked dotted line; GT: black solid line) for the average spectropolarimetric curves and error curves over a homogeneous area of 5 pixels×5 pixels. The Stokes parameters (S0, S1/S0, S2/S0, and S3/S0) are in the left column and derived angle of polarization (AOP), degree of linear polarization (DOLP), degree of circular polarization (DOCP), degree of polarization (DOP) in the right column, respectively.
    Simulated results for the reconstructed images of full-Stokes parameters (S0, S1, S2, and S3) over the spectral bands of 450, 550, and 650 nm from the TwIST-SP to DIP-SP methods, respectively. The PSNRs and SSIMs relative to the GT at each spectral band are provided below each image. (a) Low-noise level (σ=0.05) and (b) high-noise level (σ=0.2).
    Scheme of our miniature snapshot ORRISp. (a) Optical scheme and (b) prototype. MOR, multiple-order retarder; HLP, horizontally linear polarizer; AA, aperture array; LA, lenslet array; BA, baffle array; CVF, continuous variable filter; and FPA, focal plane array.
    Lab scene experiment. Experimental setting (top left) and the color-checker covered with different polarizers as test scene (top right). (a) The red-square mark area is the linear polarizer; (b) the yellow-square mark area is the left-circular polarizer; and (c) the azure-square mark area is the linear polarizer. Lower parts are reconstructed Stokes parameters (S0, S1, S2, and S3) at 550 nm from the TwIST-SP and DIP-SP methods at two exposure time of 60 and 150 ms, respectively.
    Lab experimental spectropolarimetric curves (S0, S1/S0, S2/S0, and S3/S0) of the three selected areas that are shown in the top right of Fig. 7. (a) Red-square mark area; (b) yellow-square mark area; and (c) azure-square mark area.
    Outdoor scene experiment. The reconstructed results at the exposure time of 50 ms for the CIE color fusion image S0 and the gray images (S1/S0, S2/S0, and S3/S0) over the four spectral bands of 480, 550, 600, and 700 nm, respectively. The images from the polarization camera at 550 nm are used for the GT. The spectropolarimetric curves (S0, S1/S0, S2/S0, and S3/S0) of the selected point on the vehicle sunroof are plotted, where only the spectrum S0 has the GT from the fiber spectrometer.
    Dependence of reconstruction quality individually on the fast-axis orientation θ and the thickness d of the MOR in the SR-PM scheme using the DIP-SP method.
    (a) and (b) The tolerances of the initialization values (di,θi) from the practical values (dp,θp) of retarder, respectively, under different noise levels.
    History of PSNR and SSIM values of the reconstruction results by the overparameterized network (Res-Unet) and underparameterized network (deep decoder) with respect to the iterations. The inset represents the S0 image every 500 iterations (the upper and lower rows are from the underparameterized and overparameterized network, respectively).
    Acceleration strategy of the DIP-SP processing the images of all spectral bands one by one.
    • Table 1. The average absolute errors and RMSEs of spectropolarimetric curves (TwIST-TV, TwIST-SP, DIP, and DIP-SP) relative to the GT.

      View table
      View in Article

      Table 1. The average absolute errors and RMSEs of spectropolarimetric curves (TwIST-TV, TwIST-SP, DIP, and DIP-SP) relative to the GT.

      σAverage absolute errorRMSE
      S0S1S2S3AOPDOLPDOCPDOPS0S1S2S3AOPDOLPDOCPDOP
      TwIST-TV0.050.1870.2030.1960.0414.50.220.040.220.2860.3690.3630.0726.30.320.080.33
      0.200.4360.2450.2430.08611.20.310.090.320.4130.4820.4800.14217.10.460.140.47
      TwIST-SP0.050.0340.0780.0620.0242.10.070.020.070.0580.1340.1280.0433.10.140.050.15
      0.200.0810.1140.1270.0595.40.130.040.130.1130.2520.2430.0827.40.260.090.27
      DIP0.050.3020.2830.1630.16221.40.240.170.290.3550.4220.2380.19432.30.350.200.40
      0.200.4860.4810.2420.26330.90.310.270.350.6160.5800.3510.30746.20.480.330.58
      DIP-SP0.050.0030.0040.0040.0020.20.0080.0020.010.0070.0140.0140.0050.80.0120.0050.01
      0.200.0040.0060.0060.0030.50.0120.0030.020.0150.0260.0250.0081.30.0240.0080.03
    • Table 2. Lab experimental results for the RMSEs of reconstructed spectropolarimetric curves relative to the results from the DIP-SP method at the long exposure time of 150 ms.

      View table
      View in Article

      Table 2. Lab experimental results for the RMSEs of reconstructed spectropolarimetric curves relative to the results from the DIP-SP method at the long exposure time of 150 ms.

      Time(a)(b)(c)
      S1S2S3S1S2S3S1S2S3
      TwIST-SP150 ms0.0150.0140.0110.0150.0150.0110.0130.0130.010
      60 ms0.0550.0560.0490.0560.0590.0510.0510.0500.046
      DIP-SP60 ms0.0080.0070.0060.0090.0080.0070.0080.0080.007
    • Table 3. Outdoor experimental results for the average PSNRs and SSIMs at 550 nm of each method.

      View table
      View in Article

      Table 3. Outdoor experimental results for the average PSNRs and SSIMs at 550 nm of each method.

      PSNR (dB)SSIM
      S0S1/S0S2/S0S3/S0S0S1/S0S2/S0S3/S0
      TwIST-SP25.4825.1925.1624.830.8590.8520.8510.849
      DIP-SP35.4234.8334.6033.890.9460.9420.9410.935
    • Table 4. Iteration statistics for the simulated and experimental data using the speed-up DIP-SP.

      View table
      View in Article

      Table 4. Iteration statistics for the simulated and experimental data using the speed-up DIP-SP.

      First Spectral BandSubsequent Spectral BandTotal time (s)
      IterationsIteration time (s)IterationsIteration time (s)
      Simulated data1500404000.4064
      Lab data3000615000.5196
      Outdoor data5800876500.64133
    Tools

    Get Citation

    Copy Citation Text

    Feng Han, Tingkui Mu, Haoyang Li, Abudusalamu Tuniyazi, "Deep image prior plus sparsity prior: toward single-shot full-Stokes spectropolarimetric imaging with a multiple-order retarder," Adv. Photon. Nexus 2, 036009 (2023)

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Research Articles

    Received: Mar. 4, 2023

    Accepted: Apr. 13, 2023

    Published Online: May. 22, 2023

    The Author Email: Tingkui Mu (tkmu@mail.xjtu.edu.cn)

    DOI:10.1117/1.APN.2.3.036009

    Topics