[1] [1] Yu Yinshan, You Libing, Liang Xu, et al. Progress of excimer lasers technology[J]. Chinese J Lasers, 2010, 37(9): 2253-2270. (in Chinese)

[2] [2] Gontad F, Conde J C, Chiussi S, et al. 193 nm excimer laser processing of Si/Ge/Si(100) micropatterns[J]. Applied Surface Science, 2016, 362: 217-220.

[3] [3] Zhang Jian, Lin Guangping, Zhang Rui, et al. Fabrication of large grain size p-Si film by phase modulated excimer laser crystallization[J]. Optics and Precision Engineering, 2012, 20(1): 59-63. (in Chinese)

[4] [4] Tian L S, Liu Z, Li L, et al. A comparison of the characteristics of excimer and femtosecond laser ablation of acrylonitrile butadiene styrene (ABS)[J]. Applied Surface Science, 2016, 364: 467-476.

[5] [5] Guo P, Rao Y, Li D, et al. Inscription of Bragg gratings in few-mode optical fibers[J]. Chinese Optics Letters, 2013, 11(2): 18-20.

[6] [6] Chen Y, Okada T, Noguchi T, et al. Excimer laser annealing for low-voltage power MOSFET[J]. Japanese Journal of Applied Physics, 2016, 55(8): 086503.

[7] [7] Zhang Wei, Liang Xu, Tao Ruhua, et al. Reasarch of compact excimer laser for producing FBG[J]. Infrared and Laser Engineering, 2016, 45(1): 0105001. (in Chinese)

[8] [8] Plaza-Puche A B, Aswad A E, Arba-Mosquera S, et al. Optical profile following high hyperopia correction with a 500-Hz excimer laser system.[J]. Journal of Refractive Surgery, 2016, 32(1): 6.

[9] [9] Shroff A, Malajian D, Czarnowicki T, et al. Use of 308 nm excimer laser for the treatment of chronic hand and foot eczema[J]. International Journal of Dermatology, 2016, 55(8): e447-e453.

[10] [10] Ma Yue, Yang Chunjun, Deng Zanhong, et al. Advances in vitiligo treatment by 308nm excimer laser[J]. Acta Laser Biology Sinica, 2012, 21(4): 295-298. (in Chinese)

[11] [11] Fang Xiaodong, Dai Jinghua. Experimental study on gas lifetime of XeCl excimer laser[J]. Laser Technology, 1996, 20(1): 50-52. (in Chinese)

[12] [12] Hu Xuejin, Zhao Zhensheng, Li Zhaolin, et al. Study on the operation lifetime of an excimer laser[J]. Acta Photonica Sinica, 1985, 5(10): 881-884. (in Chinese)

[13] [13] Sumitani A, Andou S, Watanabe T, et al. Output stabilization technology with chemical impurity control on ArF excimer laser[C]//Microlithography, International Society for Optics and Photonics, 2000: 1424-1434.

[14] [14] Liang Xu, You Libing, Yu Yinshan. Excimer laser pulse energy detection under pulse repetion running mode[J]. Chinese Journal of Quantum Electronics, 2010, 27(3): 281-287. (in Chinese)

[15] [15] Fan Yuanyuan, Zhou Yi, Liu Guangyi, et al. Compound cavity ArF excimer laser with high efficiency[J]. Chinese J Lasers, 2016, 43(2): 0202001.

[16] [16] Kakizaki K, Sasaki Y, Inoue T. High-repetition-rate(6 kHz)and long-pulse-duration(50 ns) ArF immersion lithography [C]//Proceedings of SPIE, 2008, 6924: 2R1-2R10.

[17] [17] Pflanz T, Huber H. Compact excimer laser light source for optical inspection systems[C]//Proceedings of SPIE, 2001, 4349: 180-184.

[18] [18] (in Chinese)

          Wang Xiaoshun, Liang Xu, You Libing, et al. Study on energy control algorithm for high-repetition-rate ArF excimer lasers[J]. Laser Technology, 2012, 36(6): 763-766.

[19] [19] Zhan Juntong, Fu Qiang, Duan Jin, et al. Stability improvement of DFB laser driving power using digital position PID algorithm[J]. Infrared and Laser Engineering, 2015, 44(6): 1758-1761. (in Chinese)

[20] [20] Liu Yi, Fang Xiaodong, Liang Xu, et al. 308 nm XeCl excimer laser system used for treatment of vitiligo[J]. Chinese J Lasers, 2012, 39(6): 0602002.

[21] [21] Patil S L, Agarwala A K. Push pull boost converter with low loss switching[C]//Industrial Technology ICIT International Conference on IEEE, 2008: 1-6.

[22] [22] Kim E H, Kwon B H. High step-up resonant push-pull converter with high efficiency[J]. Power Electronics, IET, 2009, 2(1): 79-89.