[1] Yan J J, Zheng D L, Li H X et al. Selective laser melting of H13: microstructure and residual stress[J]. Journal of Materials Science, 52, 12476-12485(2017). http://link.springer.com/10.1007/s10853-017-1380-3

[2] Xu J G, Chen Y, Chen H et al. Influence of process parameters on forming defects of H13 steel processed by selective laser melting[J]. Laser & Optoelectronics Progress, 55, 041405(2018).

[3] Ye X C, Liu S Y, Chen S H et al. Heat treatment process of H13 hot die steel after forging[J]. Heat Treatment of Metals, 38, 72-74(2013).

[4] Ji X T, Chen K Y, Zhou Y et al. Effect of Cr on performance of mold steel fabricated by selective laser melting[J]. Laser & Optoelectronics Progress, 55, 091402(2018).

[5] Kadirgama K. Harun W S W, Tarlochan F, et al. Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6Al4V material[J]. The International Journal of Advanced Manufacturing Technology, 97, 495-510(2018).

[6] Yang Y Q, Chen J, Song C H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011411(2018).

[7] Zhang J L, Li F L, Zhang H J. Research progress on preparation of metallic materials by selective laser melting[J]. Laser & Optoelectronics Progress, 56, 100003(2019).

[8] Wen S F, Ji X T, Zhou Y et al. Development status and prospect of selective laser melting of mould steels[J]. Laser & Optoelectronics Progress, 55, 011404(2018).

[9] Zheng D L. Fabrication of H13 steel by selective laser melting and residual stress analysis[D]. Harbin: Harbin Institute of Technology, 40-59(2016).

[10] Mazur M, Brincat P, Leary M et al. Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 93, 881-900(2017). http://link.springer.com/10.1007/s00170-017-0426-7

[11] Chen S, Tao F H, Jia C Z. Microstructure and micro-hardness of 4Cr5MoSiV1 die steels fabricated by selective laser melting[J]. Chinese Journal of Lasers, 46, 0102007(2019).

[12] Zhang J X, Huang J F, Wang H B et al. Microstructures and mechanical properties of spray formed H13 tool steel[J]. Acta Metallurgica Sinica, 50, 787-794(2014).

[13] Yan K, Chen C J, Zhang M et al. Microstructure and properties of laser additive manufacturing and tempered H13 steel[J]. China Surface Engineering, 30, 134-142(2017).

[14] Chen H Y, Gu D D, Gu R H et al. Microstructure evolution and mechanical properties of 5CrNi4Mo die steel parts by selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 43, 0203003(2016).

[15] Liu J, Chen X Y, Fan Y B. Tailoring the defects and microstructure and tensile properties investigation of H13 steel by selective laser melting[J]. Journal of Mechanical Engineering, 54, 101-107(2018).

[16] Song B, Dong S J, Liu Q et al. Vacuum heat treatment of iron parts produced by selective laser melting: microstructure, residual stress and tensile behavior[J]. Materials & Design (1980-2015), 54, 727-733(2014). http://www.sciencedirect.com/science/article/pii/S0261306913008297

[17] Cui Z Q, Wang K L, Wu R[M]. Physical metallurgy and heat treatment, 246-285(2010).

[18] Zhang C, Huang J F, Dou M Y et al. Transformation rule of microstructure and carbides of H13 steel during tempering[J]. Heat Treatment of Metals, 41, 1-5(2016).

[19] Yan K. Effect of tempering treatment on microstructure and properties of H13 tool steel deposited by laser additive manufacturing technology[D]. Suzhou: Soochow University, 21-47(2017).

[20] Hou W, Chen J, Chu S L et al. Anisotropy of microstructure and tensile properties of AlSi10Mg formed by selective laser melting[J]. Chinese Journal of Lasers, 45, 0702003(2018).

[21] Liu Z W, Cheng X, Li J et al. Heat-processing technology for laser additive manufacturing of 05Cr15Ni5Cu4Nb precipitation-hardening stainless steels[J]. Chinese Journal of Lasers, 44, 0602010(2017).

[22] Xiao Z N, Liu T T, Liao W H et al. Microstructure and mechanical properties of TC4 titanium alloy formed by selective laser melting after heat treatment[J]. Chinese Journal of Lasers, 44, 0902001(2017).

[23] Song W W, Min Y A, Wu X C. Study on carbides and their evolution in H13 hot work steel[J]. Transactions of Materials and Heat Treatment, 30, 122-126(2009).