[1] [1] C. S. Montross, T. Wei, L. Ye et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review［J］. International Journal of Fatigue, 2002, 24(10): 1021～1036

[2] [2] A. H. Clauer, D. F. Lahrman. Laser shock processing as a surface enhancement process［J］. Key Engineering Materials, 2001, 197: 121～144

[3] [3] R. Fabbro, J. Fournier, P. Ballard et al.. Physical study of laser-produced plasma in confined geometry［J］. J. Appl. Phys., 1990, 68(2): 775～784

[4] [4] P. Ballard. Residual stresses induced by rapid impact-applications of laser shocking［D］. Ecole Polytechnique, France, 1991

[5] [5] B. P. Fairand, A. H. Clauer. Laser generated stress waves: their characteristics and their effects to materials［C］. AIP, 1979, 50(1): 27～42

[6] [6] X. Q. Wu, C. G. Huang, X. Wang et al.. A new effective method to estimate the effect of laser shock peening［J］. International Journal of Impact Engineering, 2011, 38(5): 322～329

[7] [7] A. H. Clauer, B. P. Fairand, B. A. Wilcox. Laser shock hardening of weld zones in aluminum alloys［J］. Metallurgical and Materials Transactions A, 1977, 8(12): 1871～1876

[8] [8] Q. Liu, C. Yang, K. Ding et al.. The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy［J］. Fatigue & Fracture of Engineering Materials & Structures, 2007, 30(11): 1110～1124

[9] [9] Zhang Yongkang, Chen Jufang, Xu Renjun. Experimental research of laser shock strengthening AM50 magnesium alloy［J］. Chinese J. Lasers, 2008, 35(7): 1068～1072

[10] [10] P. Peyre, L. Berthe, X. Scherpereel et al.. Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behaviour［J］. J. Mater. Sci., 1998, 33(6): 1421～1429

[11] [11] A. Sollier, L. Berthe, P. Peyre et al.. Laser-matter interaction in laser shock processing［C］. SPIE, 2003, 4831: 463～467

[12] [12] X. Q. Wu, Z. P. Duan, H. W. Song et al.. Shock pressure induced by glass-confined laser shock peening: experiments, modeling and simulation［J］. J. Appl. Phys., 2011, 110(5): 053112

[13] [13] Zhong Junwei, Lu Jinzhong, Luo Kaiyu et al.. Tribological behavior of laser shock processing AISI8620 steel［J］. Chinese J. Lasers, 2012, 39(1): 0103001

[14] [14] C. Yang, P. D. Hodgson, Q. Liu et al.. Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening［J］. J. Mater. Process. Tech., 2008, 201(1-3): 303～309

[15] [15] W. Zhang, Y. L. Yao, I. Noyan. Microscale laser shock peening of thin films, part 1: experiment, modeling and simulation［J］. Journal of Manufacturing Science and Engineering, 2004, 126(1): 10～17

[16] [16] Zhang Yongkang, Yu Shuisheng, Yao Hongbing et al.. Experimental study of shock waves induced by high-power pulsed laser in AZ31B magnesium alloy［J］. Acta Physica Sinica, 2010, 59(8): 5602～5605

[17] [17] K. Y. Luo, J. Z. Lu, Y. K. Zhang et al.. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel［J］. Materials Science and Engineering: A, 2011, 528(13-14): 4783～4788

[18] [18] Zhu Xiangqun. A Study on the Substructural Characteristics and Evolutional Mechanisms of Materials Imposed by High Strain Rate Loading［D］. Jiangsu: Jiangsu University, 2005

[19] [19] X. Zhu, M. Zhou, Q. Dai et al.. Deformation modes in stainless steel during laser shock peening［J］. Journal of Manufacturing Science and Engineering A, 2009, 131(5): 054503

[20] [20] Zhang Junbao, Chen Aiying, Song Hongwei et al.. Microstructure and properties of surface nanocrystallized AISI 304 stainless steel［C］. The 2006 Beijing International Material Week. Beijing: Chinese Materials Research Society, 2006. 396～400

[21] [21] P. C. Chou, A. K. Hopkins. Dynamic Response of Materials to Intense Impulsive Loading［M］. Air Force Materials Laboratory, Wright Patterson AFB, OH, 1973

[22] [22] M. A. Meyers. Dynamic Behavior of Materials［M］. New York: Wiley-Interscience, 1994

[23] [23] Hu Yongxiang. Research on the Numerical Simulation and Impact Effects of Laser Shock Processing［D］. Shanghai: Shanghai Jiao Tong University, 2008