[1] Yao J H, Wu L J, Li B et al. Research states and development tendency of supersonic laser deposition technology[J]. Chinese Journal of Lasers, 46, 0300001(2019).

[2] Jones M, Cockburn A, Lupoi R et al. Solid-state manufacturing of tungsten deposits onto molybdenum substrates with supersonic laser deposition[J]. Materials Letters, 134, 295-297(2014).

[3] Zhang Q L, Wang C Y, Liu B et al. Thermal conductivity of diamond/copper composite coatings prepared by supersonic laser deposition with W metallization[J]. Chinese Journal of Rare Metals, 47, 748-756(2023).

[4] Yin S, Cavaliere P, Aldwell B et al. Cold spray additive manufacturing and repair: fundamentals and applications[J]. Additive Manufacturing, 21, 628-650(2018).

[5] Wang K, Zhao L J, Mao T L et al. Effect of laser power on the microstructure and mechanical properties of laser-assisted cold sprayed 7075 aluminum alloy deposits[J]. Materials Science and Engineering: A, 879, 145224(2023).

[6] Wang Q, Li N, Zhou L C et al. Microstructure and fatigue performance of hard Al alloy repaired by supersonic laser deposition with laser shock peening treatment[J]. Materials Characterization, 200, 112827(2023).

[7] Sun J Y, Yan Y L, Li B et al. Comparative study on cavitation-resistance and mechanism of stellite-6 coatings prepared with supersonic laser deposition and laser cladding[J]. Chinese Journal of Lasers, 48, 1002118(2021).

[8] Liu B, Ma L, Tian K et al. Surface-metallized CNTs/Cu composite coating prepared by laser-assisted low-pressure cold spray[J]. Laser & Optoelectronics Progress, 60, 2114008(2023).

[9] Nguyen H D, Pramanik A, Basak A K et al. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties[J]. Journal of Materials Research and Technology, 18, 4641-4661(2022).

[10] Li W Y, Yang K, Yin S et al. Solid-state additive manufacturing and repairing by cold spraying: a review[J]. Journal of Materials Science & Technology, 34, 440-457(2018).

[11] Zhou H X, Li C X, Yang H et al. Pores structure change induced by heat treatment in cold-sprayed Ti6Al4V coating[J]. Journal of Thermal Spray Technology, 28, 1199-1211(2019).

[12] Chen C Y, Ren Z M, Xie Y C et al. Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing[C], 781-788(2019).

[13] Luo X T, Wei Y K, Wang Y et al. Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying[J]. Materials & Design, 85, 527-533(2015).

[14] Bray M, Cockburn A, O’Neill W. The Laser-assisted Cold Spray process and deposit characterisation[J]. Surface and Coatings Technology, 203, 2851-2857(2009).

[15] Li B, Wu L J, Zhang X et al. Microstructure and corrosion-resistant property of Ti6Al4V coating prepared by supersonic laser deposition[J]. China Surface Engineering, 31, 159-166(2018).

[16] Wang W L, Wu L J, Li B et al. Numerical simulation and experimental verification of interfacial bonding behavior of Ti-6Al-4V alloy via supersonic laser deposition[J]. Surface Technology, 49, 324-332(2020).

[17] Boruah D, McNutt P, Sharma D et al. Understanding the effect of substrate preheating temperature and track spacing on laser assisted cold spraying of Ti6Al4V[J]. Metals, 13, 1640(2023).

[18] Cao C C, Li W Y, Yang K et al. Influence of substrate hardness and thermal characteristics on microstructure and mechanical properties of cold sprayed TC4 titanium alloy coatings[J]. Materials Reports, 33, 277-282(2019).

[19] Sharma M M, Eden T J, Golesich B T. Effect of surface preparation on the microstructure, adhesion, and tensile properties of cold-sprayed aluminum coatings on AA2024 substrates[J]. Journal of Thermal Spray Technology, 24, 410-422(2015).

[20] Sun W, Tan A W Y, Khun N W et al. Effect of substrate surface condition on fatigue behavior of cold sprayed Ti6Al4V coatings[J]. Surface and Coatings Technology, 320, 452-457(2017).

[21] Kumar S, Bae G, Lee C. Influence of substrate roughness on bonding mechanism in cold spray[J]. Surface and Coatings Technology, 304, 592-605(2016).

[22] Zhang G, Zhang J, Li B et al. Influence of laser irradiation on compactness and wear resistance of Ti6Al4V coating prepared by supersonic laser deposition[J]. Acta Optica Sinica, 41, 1414002(2021).

[23] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 21, 31-48(1985).

[24] Tan A, Lek J, Sun W et al. Influence of particle velocity when propelled using N2 or N2-He mixed gas on the properties of cold-sprayed Ti6Al4V coatings[J]. Coatings, 8, 327-348(2018).

[25] Yin S, Wang X F, Li W Y et al. Deformation behavior of the oxide film on the surface of cold sprayed powder particle[J]. Applied Surface Science, 259, 294-300(2012).

[26] Wu X K, Zhou X L, Wang J G et al. Numerical investigation on energy balance and deposition behavior during cold spraying[J]. Acta Metallurgica Sinica, 46, 385-389(2010).

[27] Bae G, Xiong Y M, Kumar S et al. General aspects of interface bonding in kinetic sprayed coatings[J]. Acta Materialia, 56, 4858-4868(2008).

[28] Wu J W, Fang H Y, Yoon S et al. The rebound phenomenon in kinetic spraying deposition[J]. Scripta Materialia, 54, 665-669(2006).