[1] [1] Shu Linsen, Cao Huajun, Xu Lei, et al.. 3D characteristic modeling method and application for remanufactured impeller of centrifugal compressor[J]. Chinese Journal of Mechanical Engineering, 2014, 50(3): 184-190.

[2] [2] Feng Hui, Li Jianfeng, Sun Jie. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese J Lasers, 2014, 41(8): 0803003.

[3] [3] Li Jianing, Gong ShuiLi, Wang Xichang, et al.. Physical and surface performance of laser clad Ni based coating on a TA15-2 alloy [J]. Chinese J Lasers, 2013, 40(11): 1103008.

[4] [4] Liu Haiqing, Liu Xiubo, Meng Xiangjun, et al.. Study on γ-NiCrAlTi/TiC+TiWC2/CrS+Ti2CS high-temperature self-lubricating wear resistant composite coating on Ti-6Al-4V by laser cladding[J]. Chinese J Lasers, 2013, 41(3): 0303005.

[5] [5] Golmakaniyoon S, Mahmudi R. Microstructure and creep behavior of the rare-earth doped Mg-6Zn-3Cu cast alloy[J]. Materials Science & Engineering A, 2011, 528(3): 1668-1677.

[6] [6] Lu Xili, Chen Feng, Li Weishu, et al.. Effect of Ce addition on the microstructure and damping properties of Cu-Al-Mn shape memory alloys[J]. Journal of Alloys and Compounds, 2009, 480(2): 608-611.

[7] [7] Zhang Zhongming, Wang Jincheng, Xu Donghui, et al.. Effect of Al, Cu, Mg content on microstructure and damping capacity of zinc based alloy[J]. The Chinese Journal of Nonferrous metals, 1999, 9(S1): 1-6.

[8] [8] Li Jiqing. Study on Preparation and Ageing Precipitation Behavior of Superlight Mg-Li Alloy with Cu Addition[D]. Harbin: Harbin Engineering University, 2011. 26-36.

[9] [9] Azcoitia C, Karimi A. Magnetomechanical damping in Fe-Cr alloys and effect of Al and Mo addition[J]. Journal of Alloys and Compounds, 2000, 310(1): 160-164.

[10] [10] Baik S. High damping Fe-Mn martensitic alloys for engineering applications[J]. Nuclear Engineering and Design, 2000, 198(3): 241-252.

[11] [11] Zhao Rongda. Influence of Copper on Microstructure and Properties of Low Carbon Martensite Antibacterial Stainless Steel[D]. Fuxin: Liaoning Technical University, 2009. 26-33.

[12] [12] Qin Bin, Ma Yongzhu, Jiang Laizhu. Study on the properties of Cu-containing martensitic stainless steel[J]. Baosteel Technology, 2013, 2: 43-46.

[13] [13] Zeren M, Karakulak E, Gümüs S. Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu-alloys[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(8): 1698-1702.

[14] [14] Li Jianchun. Effect of Mn and Cu content on microstructure and properties of Zn-Al alloy[J]. Physical Testing and Chemical Analysis Part A: Physical Testing, 2009, 45(6): 331-334.

[15] [15] Choudhury S K, Sharath M S. On-line control of machine tool vibration during turning operation[J]. Journal of Materials Processing Technology, 1995, 47: 251-259.

[16] [16] Huang Panling, Li Jianfeng, Sun Jie, et al.. Study on performance in dry ailling aeronautical titanium alloy thin-wall components with two types of tools[J]. Journal of Cleaner Production, 2013, 67: 258-264.

[17] [17] Yang Y, Munoa J, Altintas Y. Optimization of multiple tuned mass dampers to suppress machine tool chatter[J]. International Journal of Machine Tools and Manufacture, 2010, 50(9): 834-842.

[18] [18] Siddhpura M, Paurobally R. A review of chatter vibration research in turning[J]. International Journal of Machine Tools and Manufacture, 2012, 61: 27-47.

[19] [19] Al-Regib E, Ni J, Lee S. Programming spindle speed variation for machine tool chatter suppression[J]. International Journal of Machine Tools and Manufacture, 2003, 43(12): 1229-1240.

[20] [20] Hu Wenquan, Hu Shiju, Zhang Weiqiang. Influence of copper on antibacterial property and mechanical property of low-carbon martensite stainless steel[J]. Material & Heat Trement, 2009, 38(2): 32-34.

[21] [21] Li Na. Study on effects of copper in steel[J]. Journal of University of Science and Technology Liaoning, 2011, 34(2): 160-165.

[22] [22] Ouyang Huangsheng. Effects of Cu Content on the Microstructure and Mechanical Properties of 9Ni Cold Steel[D]. Kunming: Kunming University of Science and Technology, 2012. 14-16.

[23] [23] Zhang Lingfeng, Xiong Yi, Zhang Yi, et al.. Microstructure of high manganese steel by laser shock processing[J]. Chinese J Lasers, 2011, 38(6): 226-229.

[24] [24] Granato1 A, Lücke K. Application of dislocation theory to internal friction phenomena at high frequencies[J]. Appl Phy, 1956, 27(7): 789-805.

[25] [25] Liu Xianlan. Study on Mechanical Properties and Damping Capacities of Mg-Zn-Nd-Cd-Zr Alloy[D]. Changsha: Central South University, 2012. 11-14.