[1] Zhao Y Q, Ma C L, Chang H et al. New high strength and high toughness titanium alloy with 1200 MPa[J]. Materials China, 35, 914-918(2016).

[2] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[3] Wang H J, Yang F, Guo Z M et al. Progress and challenge of 3D printing titanium and titanium alloys[J]. Rare Metal Materials and Engineering, 50, 709-716(2021).

[4] Zhao Y Q, Ge P, Xin S W. Progresses of R & D on Ti-alloy materials in recent 5 years[J]. Materials China, 39, 557-558(2020).

[5] Sharma D, Kada S R, Fabijanic D et al. The ageing response of direct laser deposited metastable β-Ti alloy, Ti-5Al-5Mo-5V-3Cr[J]. Additive Manufacturing, 48, 102384(2021).

[6] Liu C M, Yu L, Zhang A L et al. Beta heat treatment of laser melting deposited high strength near β titanium alloy[J]. Materials Science and Engineering: A, 673, 185-192(2016).

[7] Pang X T, Xiong Z H, Yao C W et al. Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning α phase by post heat treatment[J]. Materials Science and Engineering: A, 831, 142265(2022).

[8] Deng H, Chen L Q, Qiu W B et al. Microstructure and mechanical properties of as-deposited and heat treated Ti-5Al-5Mo-5V-3Cr-1Zr (Ti-55531) alloy fabricated by laser melting deposition[J]. Journal of Alloys and Compounds, 810, 151792(2019).

[9] Liu C M, Wang H M, Tian X J et al. Subtransus triplex heat treatment of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Materials Science and Engineering: A, 590, 30-36(2014).

[10] Liu C M, Tian X J, Tang H B et al. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Journal of Alloys and Compounds, 572, 17-24(2013).

[11] Wang H, Hu Y N, Wang T. Microstructure and tribological properties of additively manufactured TC17 titanium alloy under different heat treatment processes[J]. Chinese Journal of Lasers, 51, 1202301(2024).

[12] Bermingham M J, StJohn D H, Krynen J et al. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing[J]. Acta Materialia, 168, 261-274(2019).

[13] Yang G, Song H H, Qin L Y et al. Thermal behavior and microstructure evolution of titanium alloy by laser deposition[J]. Rare Metal Materials and Engineering, 45, 2598-2604(2016).

[14] Liu C M, Wang H M, Tian X J et al. Development of a pre-heat treatment for obtaining discontinuous grain boundary α in laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe alloy[J]. Materials Science and Engineering: A, 604, 176-182(2014).

[15] Lü Z D, Zhang C J, Du Z X et al. Relationship between microstructure and tensile properties on a near-β titanium alloy after multidirectional forging and heat treatment[J]. Rare Metals, 38, 336-342(2019).

[16] Yin Y F, Jia W J, Li S L et al. Influence of duplex aging on microstructure of TC29 titanium alloy[J]. Rare Metal Materials and Engineering, 48, 3001-3006(2019).

[17] Yang G, Shao S, Wang C et al. Microstructure and mechanical behavior of Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V titanium alloy fabricated by laser deposition with change of solution temperature[J]. Chinese Journal of Rare Metals, 45, 264-271(2021).

[18] Wu C, Zhan M. Effect of solution plus aging heat treatment on microstructural evolution and mechanical properties of near-β titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 29, 997-1006(2019).

[19] Liang Y P. Study on microstructure and properties of high temperature and high strength titanium alloy fabricated by laser additive manufacturing[D], 66(2022).

[20] Lu J W. Strengthening mechanism of Mo and microstructural evolution in titanium alloys[D], 150(2014).