[1] [1] D I Adebiyi, A P I Popoola. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials and Design, 2015, 74: 67-75.

[2] [2] J C Oh, E Yun, M G Golkovski, et al.. Improvement of hardness and wear resistance in SiC/Ti- 6Al- 4Vsurface composites fabricated by high-energy electron beam irradiation[J]. Materials Science and Engineering A, 2003, 351(1-2): 98-108.

[3] [3] Z G Zhang, Y P Peng, Y L Mao, et al.. Effect of hot-dip aluminizing on the oxidation resistance of Ti-6Al-4V alloy at high temperatures [J]. Corrosion Science, 2012, 55: 187-193.

[4] [4] I Saravanan, A Elaya Perumal, S C Vettivel, et al.. Optimizing wear behavior of TiN coated SS 316L against Ti alloy using response surface methodology[J]. Materials and Design, 2015, 67: 469-482.

[5] [5] C Guo, J M Chen, J S Zhou, et al.. Effects of WC-Ni content on microstructure and wear resistance of laser cladding Ni-based alloys coating[J]. Surface & Coatings Technology, 2012, 206(8): 2064-2071.

[6] [6] S Suresh, N S V Moorthi, S C Vettivel, et al.. Mechanical behavior and wear prediction of stir cast Al- TiB2 composites using response surface methodology[J]. Materials and Design, 2014, 59: 383-396.

[7] [7] H P Xiong, W Mao, W L Ma, et al.. Liquid-phase aluminizing and siliconizing at the surface of a Ti60 alloy and improvement in oxidation resistance[J]. Materials Science and Engineering A, 2006, 433(1): 108-113.

[8] [8] J Malecka. Effect of an Al2O3 coating on the oxidation process of a γ-TiAl phase based alloy[J]. Corrosion Science, 2012, 63: 287-292.

[9] [9] S Saqib, R J Urbanic, K Aggarwal. Analysis of laser cladding bead morphology for developing additive manufacturing travel paths [J]. Procedia Cirp, 2014, 17: 824-829.

[10] [10] Yao Shuang, Liu Hongxi, Zhang Xiaowei, et al.. Microstructure and wear property of TiC particle reinforced composite coatings on H13 steel surface by laser in-situ synthesis[J]. Chinese J Lasers, 2014, 41(10): 1003004.

[11] [11] Yang Jiaoxi, Wang Yanfang, Wang Zhicheng. Laser cladding Ni/Ni3Al based double performance materials and internal microstructure analysis[J]. Chinese J Lasers, 2015, 42(3): 0306001.

[12] [12] L Q Wang, J S Zhou, Y J Yu, et al.. Effect of powders refinement on the tribological behavior of Ni-based composite coatings by laser cladding[J]. Applied Surface Science, 2012, 258(17): 6697-6704.

[13] [13] Liu Haiqing, Liu Xiubo, Meng Xiangjun, et al.. Study on γ-NiCrAlTi/TiC+TiWC2/CrS+Ti2CS high-temperature self-lubricating wear resistant composite coating on Ti-6Al-4V by laser cladding[J]. Chinese J Lasers, 2014, 41(3): 0303005.

[14] [14] Du Jun, Xiao Zhaoqiang, Li Buhui, et al.. Research progress of Ti5Si3[J]. Journal of Nanchang University, 2013, 35(1): 12-16.

[15] [15] C Huang, Y Z Zhang, J Y Shen, et al.. Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V alloy[J]. Surface & Coatings Technology, 2011, 206(6): 1389-1395.

[16] [16] L Avril, B Courant, J Hantzpergue. Tribological performance of α-Fe(Cr)-Fe2B-FeB and α-Fe(Cr)-h-BN coatings obtained by laser melting[J]. Wear, 2006, 260(4): 351-360.

[17] [17] Liu Xiubo, Wang Huaming. Study on wear and high-temperature oxidation properties of laser clad metallic silicide composite coatings on TiAl intermetallic alloy[J]. Chinese J Lasers, 2005, 32(8): 1143-1149.

[18] [18] J N Li, C Z Chen, Z Q Lin, et al.. Phase constituents and microstructure of laser cladding Al2O3/Ti3Al reinforced ceramic layer on titanium alloy[J]. Journal of Alloys and Compounds, 2011, 509(14): 4882-4886.

[19] [19] O Kido, M Kurumada, K Kamitsuji, et al.. Synthesis of Al-Cr decagonal quasicrystal nanoparticles and their temperature of phase transformation to stable crystal phase[J]. Physica E, 2006, 31(2): 169-173.

[20] [20] M Zhang, B J Xu, G P Ling. Preparation and characterization of α-Al2O3 film by low temperature thermal oxidation of Al8Cr5 coating [J]. Applied Surface Science, 2015, 331: 1-7.

[21] [21] Y S Tian, C Z Chen, L X Chen, et al.. Microstructures and wear properties of composite coatings produced by laser alloying of Ti-6Al-4V with graphite and silicon mixed powders[J]. Materials Letters, 2006, 60(1): 109-113.

[22] [22] H M Wang, G Duan. Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating[J]. Materials Science and Engineering A, 2002, 336(1): 117-123.

[23] [23] Y S Mao, L Wang, K M Chen, et al.. Tribo-layer and its role in dry sliding wear of Ti-6Al-4V alloy[J]. Wear, 2013, 297(1): 1032-1039.

[24] [24] J DuttaMajumdar, B L Mordike, I Manna. Friction and wear behavior of Ti following laser surface alloying with Si, Al and Si+Al [J]. Wear, 2000, 242(1): 18-27.

[25] [25] B Bhushan. Introduction to Tribology[M]. New York: John Wiley & Sons, Ltd, 2013: 241-243.

[26] [26] H Guleryuz, H Cimenoglu. Oxidation of Ti-6Al-4V alloy[J]. Journal of Alloys and Compounds, 2009, 472(1): 241-246.