[1] P SHORE, PJPTOTRSAM MORANTZ, PHYSICAL, E SCIENCES. Ultra-precision: enabling our future. Philosophical Transactions of the Royal Society A:Mathematical, Physical and Engineering Sciences, 370, 3993-4014(2012).

[2] [2] XIN Qiang. Study on acteristics of atmospheric inductively coupled plasma jet evolution mechanism of machined surface[D]. Haerbin: Harbin Institute of Technology, 2017.

[3] R JOURDAIN, M CASTELLI, N YU, et al. Estimation of the power absorbed by the surface of optical components processed by an inductively coupled plasma torch. Applied Thermal Engineering, 108, 1372-1382(2016).

[4] A BENNETT, N YU, M CASTELLI, et al. Characterisation of a microwave induced plasma torch for glass surface modification. Frontiers of Mechanical Engineering, 16, 122-132(2021).

[5] H ZHOU, A BENNETT, M CASTELLI, et al. Design of a motorised plasma delivery system for ultra-precision large optical fabrication. International Journal of Extreme Manufacturing, 2, 045301-1-6(2020).

[6] F KAZEMI, G BOEHM, T ARNOLD. Recursive algorithm for modeling non-linear etching rates in reactive plasma jet based optical surface machining of borosilicate crown glass. Precision Engineering, 72, 205-214(2021).

[7] [7] KAZEMI F, BOEHM G, ARNOLD T, et al. An investigation on effectiveness of temperature treatment f fluinebased reactive plasma jet machining of NBK7[J]. Plasma Processes Polymers, 2020, 17(8): 2000016114.

[8] [8] ARNOLD T, BHM G, PAETZELT H. Nonconventional ultraprecision manufacturing of ULE mirr surfaces using atmospheric reactive plasma jets[C]Advances in Optical Mechanical Technologies f Telescopes Instrumentation II, United Kingdom: International Society f Optics Photonics, 2016: 99123N

[9] [9] LUTERáN J. Prozesssimulation für die deterministische Oberflchenprzisionsbearbeitung mittels lokalen chemischen Plasmajettzens[D]. Freistaat Sachsen: Universitt Leipzig, 2012.

[10] T ARNOLD, G BOEHM, I-M EICHENTOPF, et al. Plasma Jet machining a novel technology for precision machining of optical elements. Vakuum in Forschung und Praxis, 22, 10-16(2010).

[11] [11] ZHAO Xi. Reserch on design acteristics of large area contact plasma processing device at atmospheric pressure [D]. Haerbin: Harbin Institute of Technology, 2012.

[12] [12] WANG Dongfang. Study on some facts affecting the process of atmospheric plasma processing fused Silica[D]. Haerbin: Harbin Institute of Technology, 2011.

[13] [13] LI Na. Research on key technology of atmospheric plasma machining of continuous phase plate[D]. Haerbin: Harbin Institute of Technology, 2015.

[14] K YAMAMURA, Y TAKEDA, S SAKAIYA, et al. High-spatial resolution figuring by pulse width modulation controlled plasma chemical vaporization machining. Procedia CIRP, 42, 508-511(2016).

[15] T HIRANO, T OSAKA, Y SANO, et al. Development of speckle-free channel-cut crystal optics using plasma chemical vaporization machining for coherent x-ray applications. Review of Scientific Instruments, 87, 063118-1-5(2016).

[16] Y MORI, K YAMAMURA, K ENDO, et al. Creation of perfect surfaces. Journal of Crystal Growth, 275, 39-50(2005).

[17] M SHIBAHARA, K YAMAMURA, Y SANO, et al. Improvement of the thickness distribution of a quartz crystal wafer by numerically controlled plasma chemical vaporization machining. Review of Scientific Instruments, 76, 096103-1-4(2005).

[18] H TAKINO, N SHIBATA, H ITOH, et al. Computer numerically controlled plasma chemical vaporization machining with a pipe electrode for optical fabrication. Applied optics, 37, 5198-5210(1998).

[19] [19] YAMAMURA K, MIMURA H, YAMAUCHI K, et al. Aspheric surface fabrication in nanometerlevel accuracy by numerically controlled plasma chemical vapization machining (CVM) elastic emission machining (EEM)[C]XRay Mirrs, Crystals, Multilayers II, Seattle: International Society f Optics Photonics, 2002: 265270

[20] S HUANG, V VOLYNETS, JR HAMILTON, et al. Insights to scaling remote plasma sources sustained in NF₃ mixtures. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 35, 031302-1-26(2017).

[21] T XIAO, D NI. Multiscale modeling and neural network model based control of a plasma etch process. Chemical Engineering Research and Design, 164, 113-124(2020).

[22] S HUANG, S SHIM, SK NAM, et al. Pattern dependent profile distortion during plasma etching of high aspect ratio features in SiO₂. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 38, 023001-1-12(2020).

[23] S SHABANOV, IJAPA GORNUSHKIN. Chemistry in laser-induced plasmas at local thermodynamic equilibrium. Applied Physics A, 124, 1-21(2018).

[24] VS SIKARWAR, M HRABOVSKý, OOST G VAN, et al. Progress in waste utilization via thermal plasma. Progress in Energy and Combustion Science, 81, 100873-1-34(2020).

[25] AB MURPHY, DJPSS UHRLANDT, TECHNOLOGY. Foundations of high-pressure thermal plasmas. Plasma Sources Science and Technology, 27, 063001-1-43(2018).

[26] P MIREK, S ALAVI, JJPC MOSTAGHIMI, et al. A novel radio-frequency inductively coupled plasma torch for material processing. Plasma Chemistry and Plasma Processing, 41, 1547-1566(2021).

[27] M BOSELLI, M GHERARDI, VJJOPDAP COLOMBO. 3D modelling of the synthesis of copper nanoparticles by means of a DC transferred arc twin torch plasma system. Journal of Physics D:Applied Physics, 52, 444001-1-10(2019).

[28] [28] ZHANG Shiyang. Research on key technology of plasma polishing[D]. Beijing: Graduate University of the Chinese Academy of Sciences, 2020.

[29] H FUKUMOTO, I FUJIKAKE, Y TAKAO, et al. Plasma chemical behaviour of reactants and reaction products during inductively coupled CF₄ plasma etching of SiO₂. Plasma Sources Science and Technology, 18, 045027-1-5(2009).

[30] SOLO A HARRY, P FRETON, J-JJAS GONZALEZ. The virial effect—applications for SF₆ and CH₄ thermal plasmas. Applied Sciences, 9, 929-951(2019).

[31] X WANG, Q GAO, Y FU, et al. Dominant particles and reactions in a two-temperature chemical kinetic model of a decaying SF₆ arc. Journal of Physics D:Applied Physics, 49, 105502-1-18(2016).

[32] M XU, J YAN, M YANG, et al. Theoretical study of the chemical reaction mechanisms and reaction rates of CF_x+ SF_y (where x=1–3 and y=1–6) in SF₆–polytetrafluoroethylene arc plasma. Journal of Applied Physics, 126, 193304-1-11(2019).

[33] D TONELI, R PESSOA, M ROBERTO, et al. A global model study of low pressure high density CF₄ discharge. Plasma Sources Science and Technology, 28, 025007-1-39(2019).

[34] [34] MEEKS E, VOSEN S, SHON J, et al. Results from modeling simulation of chemical downstream etch systems[R] Sia National Lab. (SNLNM), Albuquerque, NM (United States), 1996.

[35] W WANG, Y WU, M RONG, et al. Theoretical computation of thermophysical properties of high-temperature F₂, CF₄, C₂F_2,, C₂F₄, C₂F₆, C₃F₆ and C₃F₈ plasmas. Journal of Physics D:Applied Physics, 45, 285201-1-16(2012).

[36] [36] JIN Y, WANG B, JI P, et al. Jet shape analysis removal function optimization of atmospheric plasma processing applied in optical fabrication. [JOL]. (20211006)[202238].https:assets.researchsquare.comfilesrs941521v1_covered.pdfc=1633524090

[37] [37] O''BRIEN WJ. acterisation material removal properties of the RAP process[D]. Oxfdshire: Cranfield University, 2011.

[38] C FANARA, P SHORE, JR NICHOLLS, et al. A new reactive atom plasma technology (RAPT) for precision machining: the etching of ULE® surfaces. Advanced Engineering Materials, 8, 933-939(2006).

[39] [39] CASTELLI M, JOURDAIN R, MCMEEKING G, et al. Initial strategies f 3D RAP processing of optical surfaces based on a temperature adaptation approach[C]Proceedings of the 36th International MATAD Conference, London: Springer, 2010: 569572

[40] [40] CASTELLI M, JOURDAIN R, MANTZ P, et al. Fast figuring of large optics by reactive atom plasma[C]Modern Technologies in Space Groundbased Telescopes Instrumentation II, Amsterdam: SPIE, 2012: 10281035

[41] [41] JOURDAIN R, CASTELLI M, SHE P, et al. Reactive atom plasma (RAP) figuring machine f meter class optical surfaces[J]. Production Engineering Research Development 2013, 7(6): 665673.

[42] N YU, R JOURDAIN, M GOURMA, et al. Analysis of de-laval nozzle designs employed for plasma figuring of surfaces. The International Journal of Advanced Manufacturing Technology, 87, 735-745(2016).

[43] Y JIN, X SU, B WANG, et al. The design and analysis of a novel low power atmospheric plasma jet torch for optical fabrication. Journal of Manufacturing Processes, 69, 422-433(2021).

[44] T ARNOLD, S GRABOVSKI, A SCHINDLER, et al. Spatially resolved emission spectroscopic investigation of microwave-induced reactive low-power plasma jets. Plasma Sources Science and Technology, 13, 309-314(2004).

[45] [45] SU X, XIN Q, LIU Y, et al. Development of atmospheric pressure plasma tch f the fabrication of freefm optics[C]ed Papers of the Chinese Society f Optical Engineering Conferences held October November 2016, China: International Society f Optics Photonics, 2017: 102550P

[46] H PAETZELT, G BöHM, A TH. Etching of silicon surfaces using atmospheric plasma jets. Plasma Sources Science and Technology, 24, 025002-1-6(2015).

[47] H JIN, F FAN, Z YUAN, et al. Investigation of the formation mechanism of the fluorocarbon film in CF₄ plasma processing of fused silica. Optik, 202, 163693-1-8(2020).

[48] [48] JIN Huiliang. Study on the mechanism of surface fmation during the removal of fused silica damage layer by atmospheric plasma[D]. Haerbin: Harbin Institute of Technology, 2014.

[49] RJ GASVODA, YG VERSTAPPEN, S WANG, et al. Surface prefunctionalization of SiO₂ to modify the etch per cycle during plasma-assisted atomic layer etching. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 37, 051003-1-10(2019).

[50] RJ GASVODA, DE STEEG AW VAN, R BHOWMICK, et al. Surface phenomena during plasma-assisted atomic layer etching of SiO₂. ACS applied materials & interfaces, 9, 31067-31075(2017).

[51] D ZHANG, MJJJOVS KUSHNER, A:VACUUM S TECHNOLOGY, et al. Investigations of surface reactions during C₂F₆ plasma etching of SiO₂ with equipment and feature scale models. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 19, 524-538(2001).

[52] M SCHAEPKENS, T STANDAERT, N RUEGER, et al. Study of the SiO₂-to-Si₃N₄ etch selectivity mechanism in inductively coupled fluorocarbon plasmas and a comparison with the SiO₂-to-Si mechanism. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 17, 26-37(1999).

[53] N RUEGER, J BEULENS, M SCHAEPKENS, et al. Role of steady state fluorocarbon films in the etching of silicon dioxide using CHF₃ in an inductively coupled plasma reactor. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films, 15, 1881-1889(1997).

[54] CB ZAROWIN. Basis of macroscopic and microscopic surface shaping and smoothing by plasma assisted chemical etching. Journal of Vacuum Science & Technology B:Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 12, 3356-3362(1994).

[55] Q XIN, N LI, J WANG, et al. Surface roughening of ground fused silica processed by atmospheric inductively coupled plasma. Applied Surface Science, 341, 142-148(2015).

[56] Q XIN, X SU, B WANG. Modeling study on the surface morphology evolution during removing the optics surface/subsurface damage using atmospheric pressure plasma processing. Applied Surface Science, 382, 260-267(2016).

[57] [57] BERGMAN TL, INCROPERA FP, LAVINE AS. Fundamentals of heat mass transfer[M]. The United States: John Wiley & Sons, 2011: 447453.

[58] P KUNTIKANA, SJH PRABHU, M TRANSFER. Impinging premixed methane-air flame jet of tube burner: thermal performance analysis for varied equivalence ratios. Heat and Mass Transfer, 55, 1301-1315(2019).

[59] P JI, D LI, X SU, et al. Optimization strategy for the velocity distribution based on tool influence function non-linearity in atmospheric pressure plasma processing. Precision Engineering, 65, 269-278(2020).

[60] Z DAI, X XIE, H CHEN, et al. Non-linear compensated dwell time for efficient fused silica surface figuring using inductively coupled plasma. Plasma Chemistry and Plasma Processing, 38, 443-459(2018).

[61] F SIEWERT, T ZESCHKE, T ARNOLD, et al. Linear chirped slope profile for spatial calibration in slope measuring deflectometry. Review of Scientific Instruments, 87, 051907-1-8(2016).

[62] [62] DAI Zuocai. Research on the key technology of high efficiency processing fused quartz by inductively coupled plasma [D]. Changsha: National University of Defense Technology, 2019.

[63] [63] XIONG Haobin. Research on key technologies of atmospheric plasma processing f fused Silica surface [D]. Changsha: National University of Defense Technology, 2015.

[64] X SU, P JI, Y JIN, et al. Freeform surface generation by atmospheric pressure plasma processing using a time-variant influence function. Optics Express, 29, 11479-11493(2021).

[65] [65] XIA Longguang. Research on high precision deterministic machining technology of optical elements by atmospheric plasma[D]. Haerbin: Harbin Institute of Technology, 2018.

[66] X SU, L XIA, K LIU, et al. Fabrication of a large-aperture continuous phase plate in two modes using atmospheric pressure plasma processing. Chinese Optics Letters, 16, 102201-1-5(2018).

[67] M CASTELLI, R JOURDAIN, G MCMEEKING, et al. Initial strategies for 3D RAP processing of optical surfaces based on a temperature adaptation approach. Proceedings of the 36th International MATADOR Conference, 569-572(2010).

[68] [68] UEDA M, SHIBAHARA M, ZETTSU N, et al. Effect of substrate heating in thickness crection of quartz crystal wafer by plasma chemical vapization machining[C]Key Engineering Materials, Switzerl: Trans Tech Publ, 2010: 218222

[69] M CASTELLI, R JOURDAIN, P MORANTZ, et al. Reactive atom plasma for rapid figure correction of optical surfaces. Key Engineering Materials, 496, 182-187(2011).

[70] P JI, H JIN, D LI, et al. Thermal modelling for conformal polishing in inductively coupled atmospheric pressure plasma processing. Optik, 182, 415-423(2019).

[71] J MEISTER, T ARNOLD. New process simulation procedure for high-rate plasma jet machining. Plasma Chemistry and Plasma Processing, 31, 91-107(2011).

[72] T ARNOLD, G BöHM. Application of atmospheric plasma jet machining (PJM) for effective surface figuring of SiC. Precision Engineering, 36, 546-553(2012).

[73] [73] BOEHM G, PAETZELT H, ARNOLD T. Ultraprecision tactile profilometry using the ISARA 400[C]Senss Measuring Systems 2014; 17. ITGGMA Symposium, Nuremberg: VDE, 2014: 14

[74] [74] MEIJER E, NIJENHUIS J, VINK R, et al. Picometer metrology f the GAIA mission[C]Astronomical Space Optical Systems, Califnia: International Society f Optics Photonics, 2009: 743915

[75] [75] SUBRAHMANYAN PK, GARDOPéE G. Reactive atom plasma (RAP) processing of mirrs f astronomy[C]Advanced Optical Mechanical Technologies in Telescopes Instrumentation, Marseille: International Society f Optics Photonics, 2008: 701809

[76] M CASTELLI, R JOURDAIN, P MORANTZ, et al. Rapid optical surface figuring using reactive atom plasma. Precision Engineering, 36, 467-476(2012).

[77] Y TAKEDA, Y HATA, K ENDO, et al. Open-air type plasma chemical vaporization machining by applying pulse-width modulation control. Journal of Physics D:Applied Physics, 47, 115503(2014).

[78] [78] SU Xing. Study on the combined process of continuous phase plate atmospheric plasma machining bon polishing[D]. Haerbin: Harbin Institute of Technology, 2020.

[79] K KAWAGUCHI, Y WANG, J XU, et al. Atom-by-atom and sheet-by-sheet chemical mechanical polishing of diamond assisted by OH radicals: a tight-binding quantum chemical molecular dynamics simulation study. ACS applied materials & interfaces, 13, 41231-41237(2021).

[80] A KUBOTA, S NAGAE, MJD TOUGE, et al. Improvement of material removal rate of single-crystal diamond by polishing using H₂O₂ solution. Diamond and Related Materials, 70, 39-45(2016).

[81] K YAMAMURA, K EMORI, R SUN, et al. Damage-free highly efficient polishing of single-crystal diamond wafer by plasma-assisted polishing. CIRP Annals, 67, 353-356(2018).

[82] H DENG, K ENDO, KJIJOMT YAMAMURA, et al. Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing. International Journal of Machine Tools and Manufacture, 115, 38-46(2017).

[83] H LUO, KM AJMAL, W LIU, et al. Atomic-scale and damage-free polishing of single crystal diamond enhanced by atmospheric pressure inductively coupled plasma. Carbon, 182, 175-184(2021).

[84] Z LI, J SHAO, Q LUO, et al. Highly accurate positioned, rapid figure correction by reactive ion etching for large aperture lightweight membrane optical elements. OSA Continuum, 2, 3350-3357(2019).

[85] J ZHANG, Z LI, J SHAO, et al. Improved etching uniformity using equivalent electrodes on an unconventional, irregular membrane optical element for large aperture diffractive optical telescopes. Optics Express, 28, 33739-33746(2020).