[1] Zhao S B. Rupture failure analysis of GH4037 stage I turbo blade[J]. Failure Analysis and Prevention, 2, 31-34(2007).

[2] Guo W Y, Wang M C, Zhang X B[J]. Recast layer formed by laser drilling of Ni-based superalloys and progress on its control Laser Journal, 2003, 1-3.

[3] Luo Y, Pang S Y, Zhou J X et al. Numerical simulation of recast layer formation in nanosecond pulse laser drilling on nickel-based high-temperature alloy[J]. Chinese Journal of Lasers, 41, 0403007(2014).

[4] Okasha M M, Mativenga P T, Driver N et al. Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application[J]. CIRP Annals, 59, 199-202(2010).

[5] Mishra S, Yadava V. Modeling and optimization of laser beam percussion drilling of nickel-based superalloy sheet using Nd: YAG laser[J]. Optics and Lasers in Engineering, 51, 681-695(2013).

[6] Fan Z J, Dong X, Wang K D et al. Effect of drilling allowance on TBC delamination, spatter and re-melted cracks characteristics in laser drilling of TBC coated superalloys[J]. International Journal of Machine Tools and Manufacture, 106, 1-10(2016).

[7] Zhu H N, Qi X X[J]. Development of machining technology gas holes on turbine blades Aeronautical Manufacturing Gechnology, 2011, 71-74.

[8] Rong L R. The laser microhol processing technolgy and its applications in space navigation field[J]. Aviation Precision Manufacturing Technology, 45, 30-33(2009).

[9] Yan X G, Gao W B, Yang S Q et al. Effect of laser pulse and workpiece parameters on microhole quality in laser drilling[J]. Applied Laser, 14, 127-130(1994).

[10] Chu Q C, Yu G, Lu G Q et al. Two-dimensional numerical investigation for the effects of laser process parameters on hole type during laser drilling[J]. Chinese Journal of Lasers, 38, 0603001(2011).

[11] Liu X Q. Comparative study of quality for conventional machining and laser processing holes[J]. Coal Mine Machinery, 31, 125-127(2010).

[12] Zang Y N, Ni X W, Chen Y B. Simulation of long pulsed laser drilling on metal based on birth and death method of ANSYS[J]. Chinese Journal of Lasers, 40, 0603005(2013).

[13] Zhang T Z, Zhang C, Li J et al. Formation mechanism of recast layer in millisecond laser drilling of Ti6Al4V alloys[J]. Acta Optica Sinica, 37, 0214001(2017).

[14] Duan W Q, Wang K D, Dong X et al. Study on machining of high-quality micro-holes by laser trepan drilling[J]. Journal of Xi'an Jiaotong University, 49, 95-103,112(2015).

[15] Fornaroli C, Holtkamp J, Gillner A. Laser-beam helical drilling of high quality micro holes[J]. Physics Procedia, 41, 661-669(2013).

[16] Wlodarczyk K L, Brunton A, Rumsby P et al. Picosecond laser cutting and drilling of thin flex glass[J]. Optics and Lasers in Engineering, 78, 64-74(2016).

[17] Huang J W, Song A P, Zhang L F[J]. Micro-deep holes laser processing method and its application Mechanical Engineering & Automation, 2011, 102-104.

[18] Wang G A, Zhang Y Z, Ni X W et al. Effect of deviation distance to focal spot on nanosecond-pulsed-laser drilling rates in air[J]. Chinese Journal of Lasers, 34, 6121-1624(2007).

[19] Silvennoinen M. Kaakkunen J J J, Paivasaari K, et al. Water spray assisted ultrashort laser pulse ablation[J]. Applied Surface Science, 265, 865-869(2013).

[20] Yan Y Z, Ji L F, Bao Y et al. An experimental and numerical study on laser percussion drilling of thick-section alumina[J]. Journal of Materials Processing Technology, 212, 1257-1270(2012).