Optics and Precision Engineering, Volume. 31, Issue 22, 3289(2023)

Residual modelling and compensation for articulated arm coordinate measuring machines based on compound calibration and extreme learning machine

Guanbin GAO... Pei XIE, Fei LIU* and Jing NA |Show fewer author(s)
Author Affiliations
  • Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming650500, China
  • show less
    References(29)

    [1] [1] 于连栋, 赵会宁. 关节类坐标测量机关键技术及进展[J]. 仪器仪表学报, 2017, 38(8): 1879-1888. doi: 10.3969/j.issn.0254-3087.2017.08.006YUL D, ZHAOH N. Key technologies and advances of articulated coordinate measuring machines[J]. Chinese Journal of Scientific Instrument, 2017, 38(8): 1879-1888.(in Chinese). doi: 10.3969/j.issn.0254-3087.2017.08.006

    [2] [2] 余越, 胡毅, 胡鹏浩, 等. 自驱动关节臂坐标测量机臂杆变形静态误差预测模型[J]. 仪器仪表学报, 2020, 41(8): 37-46.YUY, HUY, HUP H, et al. Static error prediction model of linkage deformation of self-driven articulated arm coordinate measuring machine[J]. Chinese Journal of Scientific Instrument, 2020, 41(8): 37-46.(in Chinese)

    [3] I KOVAC, A KLEIN. Apparatus and a procedu-re to calibrate coordinate measuring arms. Strojniški vestnik-Journal of Mechanical Engineering, 48, 17-32(2002).

    [4] K SHIMOJIMA, R FURUTANI, K TAKAMASU et al. The estimation method of uncertainty of articulated coordinate measuring machine, 411-415(2003).

    [5] D YE, R CHE, Q HUANG. Calibration for Kinematics Parameters of Articulated CMM, 3-145(2002).

    [6] C H RIM, G CHEN et al. A kinematic calibration method of the articulated arm coordinate measuring machine using niching chaos optimization algorithm. Journal of Testing and Evaluation, 48, 20180174(2020).

    [7] X Z CHEN, Q ZHAN. The kinematic calibration of an industrial robot with an improved beetle swarm optimization algorithm. IEEE Robotics and Automation Letters, 7, 4694-4701(2022).

    [8] [8] 潘志康, 祝连庆, 郭阳宽. 基于内点法实现关节式坐标测量机参数标定[J]. 仪器仪表学报, 2018, 39(3): 117-123.PANZ K, ZHUL Q, GUOY K. Parameter calibration for articulated arm coordinate measuring machine based on interior point algorithm[J]. Chinese Journal of Scientific Instrument, 2018, 39(3): 117-123.(in Chinese)Parameter calibration for articulated arm coordinate measuring machine based on interior point algorithm

    [9] [9] 于连栋, 曹家铭, 赵会宁, 等. 关节臂式坐标测量机的运动学建模[J]. 光学 精密工程, 2021, 29(11): 2603-2612. doi: 10.37188/OPE.20212911.2603YUL D, CAOJ M, ZHAOH N, et al. Kinematics model of articulated arm measuring machine[J]. Opt. Precision Eng., 2021, 29(11): 2603-2612.(in Chinese). doi: 10.37188/OPE.20212911.2603

    [10] [10] 夏军勇, 刘科进, 钟飞, 等. 运用改进的教学-模拟退火算法辨识关节臂式三坐标测量机的结构参数[J]. 中国机械工程, 2023, 34(3)314-323. doi: 10.3969/j.issn.1004-132X.2023.03.008XIAJ Y, LIUK J, ZHONGF, et al. Structural parameter identification for articulated arm coordinate measuring machines using modified teaching-learning-based optimization optimized by simulated annealing algorithm[J]. China Mechanical Engineering, 2023, 34(3)314-323(in Chinese). doi: 10.3969/j.issn.1004-132X.2023.03.008

    [11] G LUO, L ZOU, Z WANG et al. A novel kinematic parameters calibration method for industrial robot based on Levenberg-Marquardt and Differential Evolution hybrid algorithm. Robotics and Computer-Integrated Manufacturing, 71, 102165(2021).

    [12] B BENCIOLINI, A VITTI. A new quaternion based kinematic model for the operation and the identification of an articulated arm coordinate measuring machine inspired by the geodetic methodology. Mechanism and Machine Theory, 112, 192-204(2017).

    [13] [13] 冯旭刚, 朱嘉齐, 章家岩. 关节臂式坐标测量机的数学建模及参数标定[J]. 仪器仪表学报, 2019, 40(2): 190-197.FENGX G, ZHUJ Q, ZHANGJ Y. Mathematical model and parameter calibration of articulated arm coordinate measuring machine[J]. Chinese Journal of Scientific Instrument, 2019, 40(2): 190-197.(in Chinese)

    [14] J LU, G B GAO. Kinematic modeling and simulation of articulated arm coordinate measuring machines based on MCPC method, 932-937(2013).

    [15] K HUANG, J MO, Z FU et al. Screw theory-based mathematical model and parameter calibration for articulated arm coordinate measuring machine. Journal of Huazhong University of Science and Technology., 38, 94-97(2010).

    [16] P RAMU, JA YAGÜE, RJ HOCKEN et al. Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine. Precision Engineering, 35, 431-439(2011).

    [17] C LI, Y Q WU, H LÖWE et al. POE-based robot kinematic calibration using axis configuration space and the adjoint error model. IEEE Transactions on Robotics, 32, 1264-1279(2016).

    [18] R A BOBY. Kinematic identification of industrial robot using end-effector mounted monocular camera bypassing measurement of 3-D pose. IEEE/ASME Transactions on Mechatronics, 27, 383-394(2022).

    [19] H HAMANA, M TOMINAGA, M OZAKI et al. Calibration of articulated arm coordinate measuring machine considering measuring posture. International Journal of Automation Technology, 5, 109-114(2011).

    [20] [20] 许铀, 熊会元, 宗志坚, 等. 基于测量臂构型的单点残差修正方法[J]. 仪器仪表学报, 2011, 32(4)775-780XUY, XIONGH Y, ZONGZ J, et al. Single-point residual correction method for multi-joint arm based on pose configuration[J]. Chinese Journal of Scientific Instrument, 2011, 32(4)775-780(in Chinese)

    [21] [21] 高群, 许铀, 于丽敏, 等. 基于测量构型周期性特性的多关节测量系统残差修正方法[J]. 仪器仪表学报, 2018, 39(5): 24-32. doi: 10.19650/j.cnki.cjsi.J1803078GAOQ, XUY, YUL M, et al. Residual correction method for articulated arm coordinate measuring machine based on configuration periodicity[J]. Chinese Journal of Scientific Instrument, 2018, 39(5): 24-32.(in Chinese). doi: 10.19650/j.cnki.cjsi.J1803078

    [22] H N ZHAO, L D YU, J M CAO et al. Improving the measuring length accuracy of articulated arm coordinate measuring machine using artificial neural network. Review of Scientific Instruments, 91(2020).

    [23] G ZHAO, P ZHANG, G MA et al. System identification of the nonlinear residual errors of an industrial robot using massive measurements. Robotics and Computer-Integrated Manufacturing, 59, 104-114(2019).

    [24] HN NGUYEN, J ZHOU, HJ KANG. A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network. Neurocomputing, 151, 996-1005(2015).

    [25] J DENAVIT, R S HARTENBERG. A kinematic notation for lower-pair mechanisms based on matrices. Journal of Applied Mechanics, 22, 215-221(1955).

    [26] [26] 高贯斌, 王文, 林铿, 等. 应用改进模拟退火算法实现关节臂式坐标测量机的参数辨识[J]. 光学 精密工程, 2009, 17(10): 2499-2505. doi: 10.3321/j.issn:1004-924X.2009.10.023GAOG B, WANGW, LINK, et al. Parameter identification based on modified annealing algorithm for articulated arm CMMs[J]. Opt. Precision Eng., 2009, 17(10): 2499-2505.(in Chinese). doi: 10.3321/j.issn:1004-924X.2009.10.023

    [27] L CHENG, W WANG, Y X WENG et al. A novel kinematic parameters identification method for articulated arm coordinate measuring machines using repeatability and scaling factor. Mathematical Problems in Engineering, 2018, 1-10(2018).

    [28] [28] 许铀, 高群. 基于光栅编码器的柔性测量臂位置精度研究[J]. 仪器仪表学报, 2017, 38(2)336-342. doi: 10.3969/j.issn.0254-3087.2017.02.010XUY, GAOQ. AACMM Position accuracy distribution research based on the accuracy of grating encoder[J]. Chinese Journal of Scientific Instrument, 2017, 38(2)336-342(in Chinese). doi: 10.3969/j.issn.0254-3087.2017.02.010

    [29] G B HUANG, Q Y ZHU, C K SIEW. Extreme Learning Machine: A New Learning Scheme of Feedforward Neural Networks, 985-990(25).

    Tools

    Get Citation

    Copy Citation Text

    Guanbin GAO, Pei XIE, Fei LIU, Jing NA. Residual modelling and compensation for articulated arm coordinate measuring machines based on compound calibration and extreme learning machine[J]. Optics and Precision Engineering, 2023, 31(22): 3289

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Apr. 3, 2023

    Accepted: --

    Published Online: Dec. 29, 2023

    The Author Email: LIU Fei (feiliu2017@foxmail.com)

    DOI:10.37188/OPE.20233122.3289

    Topics