[1] D CHEN L, X SHI, L LI Y. Congruent growth of Cu₂Se thermoelectric thin films enabled by using high ablation fluence during pulsed laser deposition. J. Inorg. Mater, 30, 1115-1120(2015).

[2] R OVIK, D LONG B. A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery. Renew. Sust. Energ. Rev, 64, 635-659(2016).

[3] A LEE J, E ALIEV A, S BYKVOA J. Woven-yarn thermoelectric textiles. Adv. Mater., 28, 5038-5044(2016).

[4] G HU, J MA, J ZOU. Dependence of the texture on the thermoelectric properties of C/C composites. J. Inorg. Mater., 4, 24-29(2015).

[5] R SIDDIQUE A, S MAHMUD, B HEYST. Review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges. Renew. Sust. Energ. Rev., 73, 730-744(2017).

[6] Y GUO, C DUN, J XU. Wearable thermoelectric devices based on Au-decorated two-dimensional MoS₂. ACS Appl. Mater. Interfaces, 10, 33316-33321(2018).

[7] M HE, J LIN Y, M CHIU C. A flexible photo-thermoelectric nanogenerator based on MoS₂/PU photothermal layer for infrared light harvesting. Nano Energy, 49, 588-595(2018).

[8] G DELAIZIR, G BERNARD, J MONNIER. A comparative study of Spark Plasma Sintering (SPS), Hot Isostatic Pressing (HIP) and microwaves sintering techniques on p-type Bi₂Te₃ thermoelectric properties. Mater. Res Bull., 47, 1954-1960(2012).

[9] C ZHAO, H ZHANG, X QI. Ultra-short pulse generation by a topological insulator based saturable absorber. Appl. Phys. Lett., 101, 251112(2012).

[10] S XU, M HONG, L SHI X. High-performance PEDOT:PSS flexible thermoelectric materials and their devices by triple post-treatments. Chem. Mater., 31, 5238-5244(2019).

[11] B BESSAIR, M MATHIEU, V SALLES. Synthesis of continuous conductive PEDOT:PSS nanofibers by electrospinning: a conformal coating for optoelectronics. ACS Appl. Mater. Interfaces, 9, 950-957(2017).

[12] B ABAD, I ALDA, P CHAO. Improved power factor of polyaniline nanocomposites with exfoliated graphene nanoplatelets (GNPs). J. Mater. Chem. A, 1, 10450-10457(2013).

[13] J LIU, Y JIA, Q JIANG. Highly conductive hydrogel polymer fibers toward promising wearable thermoelectric energy harvesting. ACS Appl. Mater. Interfaces, 10, 44033-44040(2018).

[14] C WAN, R TIAN, M KONDOU. Ultrahigh thermoelectric power factor in flexible hybrid inorganic-organic superlattice. Nat. Commun, 8, 1024(2017).

[15] J GAO, C LIU, L MIAO. Enhanced power factor in flexible reduced graphene oxide/nanowires hybrid films for thermoelectrics. RSC Advances, 6, 31580-31587(2016).

[16] H SONG, K CAI. Preparation and properties of PEDOT:PSS/Te nanorod composite films for flexible thermoelectric power generator. Energy, 125, 519-525(2017).

[17] C SEE K, P FESER J, E CHEN C. Water-processable polymer- nanocrystal hybrids for thermoelectrics. Nano Lett, 10, 4664-4667(2010).

[18] J GAO, C LIU, L MIAO. Improved thermoelectric performance in flexible tellurium nanowires/reduced graphene oxide sandwich structure hybrid films. J. Electron. Mater., 46, 3049-3056(2016).

[19] B WU, Y GUO, Y HOU C. High-performance flexible thermoelectric devices based on all-inorganic hybrid films for harvesting low-grade heat. Adv. Funct. Mater., 29, 1900304(2019).

[20] N ZHONG B, T FEI G, B FU W. Solvothermal synthesis, stirring-assisted assembly and photoelectric performance of Te nanowires. Phys. Chem. Chem. Phys., 18, 32691-32696(2016).

[21] N ZHONG B, T FEI G, B FU W. Controlled solvothermal synthesis of single-crystal tellurium nanowires, nanotubes and trifold structures and their photoelectrical properties. CrystEngComm, 19, 2813-2820(2017).

[22] Z LI, S ZHENG, Y ZHANG. Controlled synthesis of tellurium nanowires and nanotubes via a facile, efficient, and relatively green solution phase method. J. Mater. Chem. A, 1, 15046-15052(2013).

[23] J GAO, L MIAO, C LIU. A novel glass-fiber-aided cold-press method for fabrication of n-type Ag₂Te nanowires thermoelectric film on flexible copy-paper substrate. J. Mater. Chem. A, 5, 24740-24748(2017).