[1] BARSOUM M W. The M_N+1AX_N phases: a new class of solids: thermodynamically stable nanolaminates[J]. Progress in Solid State Chemistry, 201(2000).

[2] DEYSHER G, SHUCK C E, HANTANASIRISAKUL K et al. Synthesis of Mo₄VAlC₄ MAX phase and two-dimensional Mo₄VC₄ MXene with five atomic layers of transition metals[J]. ACS Nano, 204(2019).

[3] BARSOUM M W[J]. MAX phases: properties of machinable ternary carbides and nitrides: John Wiley & Sons(2013).

[4] SUN Z. Progress in research and development on MAX phases: a family of layered ternary compounds[J]. International Materials Reviews, 143(2011).

[6] KOTA S, SOKOL M, BARSOUM M W. A progress report on the MAB phases: atomically laminated, ternary transition metal borides[report]. International Materials Reviews, 226(2020).

[7] JEITSCHKO W. The crystal structure of Fe₂AlB₂[J]. Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry, 163(1969).

[8] NOWOTNY H, ROGL P, Ternary metal borides. In.. Boron and refractory borides[M]. Springer(1977).

[9] TAN X, CHAI P, THOMPSON C M et al. Magnetocaloric effect in AlFe₂B₂: toward magnetic refrigerants from earth-abundant elements[J]. Journal of the American Chemical Society, 9553(2013).

[10] ADE M, HILLEBRECHT H. Ternary borides Cr₂AlB₂, Cr₃AlB₄, and Cr₄AlB₆: the first members of the series (CrB₂)_nCrAl with n= 1, 2, 3 and a unifying concept for ternary borides as MAB-phases[J]. Inorganic Chemistry, 6122(2015).

[11] SOKOL M, NATU V, KOTA S et al. On the chemical diversity of the MAX phases[J]. Trends in Chemistry, 210(2019).

[12] YU W, MAUCHAMP V, CABIOC’H T et al. Solid solution effects in the Ti₂Al(C_xN_y) MAX phases: synthesis, microstructure, electronic structure and transport properties[J]. Acta Materialia, 421(2014).

[13] NAGUIB M, BENTZEL G, SHAH J et al. New solid solution MAX phases: (Ti_0.5,V_0.5)₃AlC₂, (Nb_0.5,V_0.5)₂AlC, (Nb_0.5,V_0.5)₄AlC₃ and (Nb_0.8,Zr_0.2)₂AlC[J]. Materials Research Letters, 233(2014).

[14] TALAPATRA A, DUONG T, SON W et al. High-throughput combinatorial study of the effect of M site alloying on the solid solution behavior of M₂AlC MAX phases[J]. Physical Review B(2016).

[15] CHAMPAGNE A, RICCI F, BARBIER M et al. Insights into the elastic properties of RE-i-MAX phases and their potential exfoliation into two-dimensional RE-i-MXenes[J]. Physical Review Materials(2020).

[16] DAHLQVIST M, TAO Q, ZHOU J et al. Theoretical prediction and synthesis of a family of atomic laminate metal borides with in-plane chemical ordering[J]. Journal of the American Chemical Society, 18583(2020).

[17] NEMANI S K, ZHANG B, WYATT B C et al. High-entropy 2D carbide mxenes: TiVNbMoC₃ and TiVCrMoC₃[J]. ACS Nano, 12815(2021).

[18] ZHANG X, LI Y B, CHEN K et al. Tailoring MAX phase magnetic property based on M-site and A-site double solid solution[J]. Journal of Inorganic Materials, 1247(2021).

[19] LI Y, LU J, LI M et al. Multielemental single-atom-thick A layers in nanolaminated V₂(Sn,A)C (A=Fe, Co, Ni, Mn) for tailoring magnetic properties[J]. Proceedings of the National Academy of Sciences, 820(2020).

[20] LI Z, WU E, CHEN K et al. Chalcogenide MAX phases Zr₂Se(B_1-xSe_x)(x=0-0.97) and their conduction behaviors[J]. Acta Materialia(2022).

[21] RADOVIC M, BARSOUM M W. MAX phases: bridging the gap between metals and ceramics[J]. American Ceramics Society Bulletin, 20(2013).

[22] FASHANDI H, DAHLQVIST M, LU J et al. Synthesis of Ti₃AuC₂, Ti₃Au₂C₂ and Ti₃IrC₂ by noble metal substitution reaction in Ti₃SiC₂ for high-temperature-stable Ohmic contacts to SiC[J]. Nature Materials, 814(2017).

[23] LI M, LI Y B, LUO K et al. Synthesis of novel MAX Phase Ti₃ZnC₂via A-site-element-substitution approach[J]. Journal of Inorganic Materials, 60(2019).

[24] LI M, LU J, LUO K et al. Element replacement approach by reaction with Lewis acidic molten salts to synthesize nanolaminated MAX phases and MXenes[J]. Journal of the American Chemical Society, 4730(2019).

[25] LI Y, LI M, LU J et al. Single-atom-thick active layers realized in nanolaminated Ti₃(Al_xCu_1-x)C₂ and its artificial enzyme behavior[J]. ACS Nano, 9198(2019).

[26] DING H, LI Y, LU J et al. Synthesis of MAX phases Nb₂CuC and Ti₂(Al_0.1Cu_0.9)N by A-site replacement reaction in molten salts[J]. Materials Research Letters, 510(2019).

[27] LI Y, LIANG J, DING H et al. Near-room temperature ferromagnetic behavior of single-atom-thick 2D iron in nanolaminated ternary MAX phases[J]. Applied Physics Reviews(2021).

[28] NAGUIB M, KURTOGLU M, PRESSER V et al. Two-dimensional nanocrystals produced by exfoliation of Ti₃AlC₂[J]. Advanced Materials, 4248(2011).

[29] VAHIDMOHAMMADI A, ROSEN J, GOGOTSI Y. The world of two-dimensional carbides and nitrides (MXenes)[J]. Science(2021).

[30] LI Y, SHAO H, LIN Z et al. A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte[J]. Nature Materials, 894(2020).

[31] LI M, LI X, QIN G et al. Halogenated Ti₃C₂ MXenes with electrochemically active terminals for high-performance zinc ion batteries[J]. ACS Nano, 1077(2021).

[32] MEDVEDEVA N, NOVIKOV D, IVANOVSKY A et al. Electronic properties of Ti₃SiC₂-based solid solutions[J]. Physical Review B, 16042(1998).

[33] WANG J, ZHOU Y. Recent progress in theoretical prediction, preparation, and characterization of layered ternary transition-metal carbides[J]. Annual Review of Materials Research, 415(2009).

[34] HUG G, FRIES E. Full-potential electronic structure of Ti₂AlC and Ti₂AlN[J]. Physical Review B(2002).

[35] MUSIC D, HOUBEN A, DRONSKOWSKI R et al. Ab initio study of ductility in M₂AlC (M=Ti, V, Cr)[J]. Physical Review B(2007).

[36] ZHANG Y, MAO Z, HAN Q et al. The role of Hume-Rothery’s rules play in the MAX phases formability[J]. Materialia(2020).

[37] WANG G, PENG L, LI K et al. ALKEMIE: an intelligent computational platform for accelerating materials discovery and design[J]. Computational Materials Science(2021).

[38] FREY N C, WANG J, VEGA BELLIDO G I N et al. Prediction of synthesis of 2D metal carbides and nitrides (MXenes) and their precursors with positive and unlabeled machine learning[J]. ACS Nano, 3031(2019).

[39] SIRIWARDANE E M, JOSHI R P, KUMAR N et al. Revealing the formation energy-exfoliation energy-structure correlation of MAB phases using machine learning and DFT[J]. ACS Applied Materials & Interfaces, 29424(2020).

[40] ROHDE H, KUDIELKA H. Strukturuntersuchungen an carbosulfiden von titan und zirkon[J]. Zeitschrift für Kristallographie-Crystalline Materials, 447(1960).

[41] NOWOTNY V H. Strukturchemie einiger verbindungen der übergangsmetalle mit den elementen C, Si, Ge, Sn[J]. Progress in Solid State Chemistry, 27(1971).

[42] JEITSCHKO W, NOWOTNY H, BENESOVSKY F. Die h-phasen: Ti₂CdC, Ti₂GaC, Ti₂GaN, Ti₂InN, Zr₂InN und Nb₂GaC[J]. Monatshefte für Chemie und verwandte Teile anderer Wissenschaften, 178(1964).

[43] JEITSCHKO W, NOWOTNY H. Die kristallstruktur von Ti₃SiC₂- einneuerkom plexcarbid-typ[J]. Monatshefte für Chemie-Chemical Monthly, 329(1967).

[44] WOLFSGRUBER H, NOWOTNY H, BENESOVSKY F. Die Kristallstruktur von Ti₃GeC₂: Kurze Mitteilung[J]. Monatshefte für Chemie und verwandte Teile anderer Wissenschaften, 2403(1967).

[45] PIETZKA M, SCHUSTER J. Summary of constitutional data on the aluminum-carbon-titanium system[J]. Journal of Phase Equilibria, 392(1994).

[46] BARSOUM M W, EL-RAGHY T. Synthesis and characterization of a remarkable ceramic: Ti₃SiC₂[J]. Journal of the American Ceramic Society, 1953(1996).

[47] KUCHIDA S, MURANAKA T, KAWASHIMA K et al. Superconductivity in Lu₂SnC[J]. Physica C: Superconductivity, 77(2013).

[48] LIU Z, WU E, WANG J et al. Crystal structure and formation mechanism of (Cr_2/3Ti_1/3)₃AlC₂ MAX phase[J]. Acta Materialia, 186(2014).

[49] LAPAUW T, HALIM J, LU J et al. Synthesis of the novel Zr₃AlC₂ MAX phase[J]. Journal of the European Ceramic Society, 943(2016).

[50] TAO Q, DAHLQVIST M, LU J et al. Two-dimensional Mo_1.33C MXene with divacancy ordering prepared from parent 3D laminate with in-plane chemical ordering[J]. Nature Communications, 14949(2017).

[51] RACKL T, EISENBURGER L, NIKLAUS R et al. Syntheses and physical properties of the MAX phase boride Nb₂SB and the solid solutions Nb₂SB_xC_-x (x=0-1)[J]. Physical Review Materials(2019).

[52] WANG J, YE T N, GONG Y et al. Discovery of hexagonal ternary phase Ti₂InB₂ and its evolution to layered boride TiB[J]. Nature Communications, 2284(2019).

[53] CHEN K, BAI X, MU X et al. MAX phase Zr₂SeC and its thermal conduction behavior[J]. Journal of the European Ceramic Society, 4447(2021).

[54] DAHLQVIST M, ZHOU J, PERSSON I et al. Out-of-plane ordered laminate borides and their 2D Ti-based derivative from chemical exfoliation[J]. Advanced Materials(2021).

[55] ZHOU J, PALISAITIS J, HALIM J et al. Boridene: two-dimensional Mo_4/3B_2-x with ordered metal vacancies obtained by chemical exfoliation[J]. Science, 801(2021).

[56] DING H, LI Y, LI M et al. Chemical scissor-mediated structural editing of layered transition metal carbides[J]. Science, 1130(2023).

[57] DU Z, YANG S, LI S et al. Conversion of non-van der Waals solids to 2D transition-metal chalcogenides[J]. Nature, 492(2020).

[58] WANG S, CHENG J, ZHU S et al. A novel route to prepare a Ti₃SnC₂/Al₂O₃ composite[J]. Scripta Materialia, 80(2017).

[59] LI Y, ZHU S, WU E et al. Nanolaminated ternary transition metal carbide (MAX phase)-derived core-shell structure electrocatalysts for hydrogen evolution and oxygen evolution reactions in alkaline electrolytes[J]. The Journal of Physical Chemistry Letters, 481(2023).

[60] LU Y, KHAZAEI M, HU X et al. Facile synthesis of Ti₂AC (A=Zn, Al, In, and Ga) MAX phases by hydrogen incorporation into crystallographic voids[J]. The Journal of Physical Chemistry Letters, 11245(2021).

[61] LAPAUW T, LAMBRINOU K, CABIOC’H T et al. Synthesis of the new MAX phase Zr₂AlC[J]. Journal of the European Ceramic Society, 1847(2016).

[62] GOGOTSI Y, ANASORI B. The rise of MXenes[J]. ACS Nano, 8491.

[63] HALIM J, LUKATSKAYA M R, COOK K M et al. Transparent conductive two-dimensional titanium carbide epitaxial thin films[J]. Chemistry of Materials, 2374(2014).

[64] WANG L, ZHANG H, WANG B et al. Synthesis and electrochemical performance of Ti₃C₂T_x with hydrothermal process[J]. Electronic Materials Letters, 702(2016).

[65] GHIDIU M, LUKATSKAYA M R, ZHAO M Q et al. Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance[J]. Nature, 78(2014).

[66] URBANKOWSKI P, ANASORI B, MAKARYAN T et al. Synthesis of two-dimensional titanium nitride Ti₄N₃(MXene)[J]. Nanoscale, 11385(2016).

[67] LI T, YAO L, LIU Q et al. Fluorine-free synthesis of high-purity Ti₃C₂T_x (T=OH, O) via alkali treatment[J]. Angewandte Chemie International Edition, 6115(2018).

[68] NAGUIB M, UNOCIC R R, ARMSTRONG B L et al. Large-scale delamination of multi-layers transition metal carbides and carbonitrides “MXenes”[J]. Dalton Transactions, 9353(2015).

[69] XUAN J, WANG Z, CHEN Y et al. Organic-base-driven intercalation and delamination for the production of functionalized titanium carbide nanosheets with superior photothermal therapeutic performance[J]. Angewandte Chemie International Edition, 14789(2016).

[70] MA G, SHAO H, XU J et al. Li-ion storage properties of two- dimensional titanium-carbide synthesized via fast one-pot method in air atmosphere[J]. Nature Communications, 5085(2021).

[71] CHEN J, JIN Q, LI Y et al. Molten salt-shielded synthesis (MS₃) of MXenes in air[J]. Energy & Environmental Materials(2023).

[72] SHEN M, JIANG W, LIANG K et al. One-pot green process to synthesize MXene with controllable surface terminations using molten salts[J]. Angewandte Chemie, 27219(2021).

[73] ZHOU J, LIN Z, REN H et al. Layered intercalation materials[J]. Advanced Materials(2021).

[74] KAMYSBAYEV V, FILATOV A S, HU H et al. Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes[J]. Science, 979(2020).

[75] CUI S, FENG W, HU H et al. Hexagonal Ti₂SC with high hardness and brittleness: a first-principles study[J]. Scripta Materialia, 576(2009).

[76] CHEN K, YE Q, ZHOU J et al. Synthesis of Ti₂SC phase using iron disulfide or iron sulfide post-treated with acid[J]. Journal of the American Ceramic Society, 1074(2015).

[77] AMINI S, BARSOUM M W, EL RAGHY T. Synthesis and mechanical properties of fully dense Ti₂SC[J]. Journal of the American Ceramic Society, 3953(2007).

[78] SCABAROZI T, AMINI S, FINKEL P et al. Electrical, thermal, and elastic properties of the MAX-phase Ti₂SC[J]. Journal of Applied Physics(2008).

[79] WANG X, CHEN K, WU E et al. Synthesis and thermal expansion of chalcogenide MAX phase Hf₂SeC[J]. Journal of the European Ceramic Society, 2084(2022).

[80] FU H, TENG M, LIU W et al. The axial compressibility, thermal expansion and elastic anisotropy of Hf₂SC under pressure[J]. The European Physical Journal B, 37(2010).

[81] GONZALEZ-JULIAN J. Processing of MAX phases: from synthesis to applications[J]. Journal of the American Ceramic Society, 659(2021).

[82] CHEN K, WANG X, ZHANG J et al. Effect of A-site atom on static corrosion behavior and irradiation damage of Ti₂SC phases[J]. Journal of the American Ceramic Society, 1386(2022).

[83] WANG X, CHEN K, LI Z et al. MAX phases Hf₂(Se_xS_1-x)C (x=0-1) and their thermal expansion behaviors[J]. Journal of the European Ceramic Society, 1874(2023).

[84] ALI M, QURESHI M W. DFT insights into the new Hf-based chalcogenide MAX phase Hf₂SeC[J]. Vacuum(2022).

[85] ALI M, QURESHI M W. Newly synthesized MAX phase Zr₂SeC: DFT insights into physical properties towards possible applications[J]. RSC Advances, 16892(2021).

[86] CHEN K, CHEN Y, ZHANG J et al. Medium-entropy (Ti,Zr,Hf)₂SC MAX phase[J]. Ceramics International, 7582(2021).

[87] XIONG K, SUN Z, ZHANG S et al. A comparative study the structural, mechanical, and electronic properties of medium- entropy MAX phase (TiZrHf)₂SC with Ti₂SC, Zr₂SC, Hf₂SC via first-principles[J]. Journal of Materials Research and Technology, 2717(2022).

[88] RACKL T, JOHRENDT D. The MAX phase borides Zr₂SB and Hf₂SB[J]. Solid State Sciences(2020).

[89] ZHOU Y, XIANG H, HU C. Extension of MAX phases from ternary carbides and nitrides (X= C and N) to ternary borides (X= B, C, and N): a general guideline[J]. International Journal of Applied Ceramic Technology, 803(2023).

[90] ZHANG Q, FU S, WAN D et al. Rapidly synthesizing Hf₂SB ceramics by thermal explosion[J]. Journal of the European Ceramic Society, 3780(2022).

[91] ZHANG Q, FU S, WAN D et al. Synthesis and property characterization of ternary laminar Zr₂SB ceramic[J]. Journal of Advanced Ceramics, 825(2022).

[92] QIN Y, ZHOU Y, FAN L et al. Synthesis and characterization of ternary layered Nb₂SB ceramics fabricated by spark plasma sintering[J]. Journal of Alloys and Compounds(2021).

[93] ZHANG Q, ZHOU Y, SAN X et al. Thermal explosion synthesis of first Te-containing layered ternary Hf₂TeB MAX phase[J]. Journal of the European Ceramic Society, 173(2023).

[94] SUN Z M, GUPTA S, YE H et al. Spontaneous growth of freestanding Ga nanoribbons from Cr₂GaC surfaces[J]. Journal of Materials Research, 2618(2005).

[95] WANG X, ZHOU Y. Layered machinable and electrically conductive Ti₂AlC and Ti₃AlC₂ ceramics: a review[J]. Journal of Materials Science & Technology, 385(2010).

[96] EKLUND P, BECKERS M, JANSSON U et al. The M_n+1AX_n phases: materials science and thin-film processing[J]. Thin Solid Films, 1851(2010).

[97] HETTINGER J, LOFLAND S, FINKEL P et al. Electrical transport, thermal transport, and elastic properties of M₂AlC (M=Ti, Cr, Nb, and V)[J]. Physical Review B(2005).

[98] SCABAROZI T, GANGULY A, HETTINGER J et al. Electronic and thermal properties of Ti₃Al(C_0.5,N_0.5)₂, Ti₂Al(C_0.5,N_0.5) and Ti₂AlN[J]. Journal of Applied Physics(2008).

[99] HU C, HE L, ZHANG J et al. Microstructure and properties of bulk Ta₂AlC ceramic synthesized by an in situ reaction/hot pressing method[J]. Journal of the European Ceramic Society, 1679(2008).

[100] HU C, HUANG Q, BAO Y et al[J]. Sintering of ceramics: new emerging techniques(2012).

[101] HU C, SAKKA Y, TANAKA H et al. Low temperature thermal expansion, high temperature electrical conductivity, and mechanical properties of Nb₄AlC₃ ceramic synthesized by spark plasma sintering[J]. Journal of Alloys and Compounds, 675(2009).

[102] EL-RAGHY T, CHAKRABORTY S, BARSOUM M. Synthesis and characterization of Hf₂PbC, Zr₂PbC and M₂SnC (M=Ti, Hf, Nb or Zr)[J]. Journal of the European Ceramic Society, 2619(2000).

[103] BARSOUM M, EL-RAGHY T, ALI M. Processing and characterization of Ti₂AlC, Ti₂AlN, and Ti₂AlC_0.5N_0.5[J]. Metallurgical and Materials Transactions A, 1857(2000).

[104] BARSOUM M W, RADOVIC M. Mechanical properties of the MAX phases[J]. Annual Review of Materials Research, 195(2011).

[106] ETZKORN J, ADE M, HILLEBRECHT H. V₂AlC, V₄AlC_3-x (x≈ 0.31), and V₁₂Al₃C₈: synthesis, crystal growth, structure, and superstructure[J]. Inorganic Chemistry, 7646(2007).

[107] OUISSE T, SARIGIANNIDOU E, CHAIX-PLUCHERY O et al. High temperature solution growth and characterization of Cr₂AlC single crystals[J]. Journal of Crystal Growth, 88(2013).

[108] ETZKORN J, ADE M, HILLEBRECHT H. Ta₃AlC₂ and Ta₄AlC₃-single-crystal investigations of two new ternary carbides of tantalum synthesized by the molten metal technique[J]. Inorganic Chemistry, 1410(2007).

[109] ETZKORN J, ADE M, KOTZOTT D et al. Ti₂GaC, Ti₄GaC₃ and Cr₂GaC-synthesis, crystal growth and structure analysis of Ga-containing MAX-phases M_n+1GaC_n with M=Ti, Cr and n=1, 3[J]. Journal of Solid State Chemistry, 995(2009).

[110] CHAMPAGNE A, BATTAGLIA J L, OUISSE T et al. Heat capacity and anisotropic thermal conductivity in Cr₂AlC single crystals at high temperature[J]. The Journal of Physical Chemistry C, 24017(2020).

[111] ZHANG S, SHI L, MERCIER F et al. Conversion of MAX phase single crystals in highly porous carbides by high temperature chlorination[J]. Ceramics International, 8246(2017).

[112] OUISSE T, PINEK D, BARSOUM M. Modelling in-plane magneto- transport in Cr₂AlC[J]. Ceramics International, 22956(2019).

[113] SHI L, OUISSE T, SARIGIANNIDOU E et al. Synthesis of single crystals of V₂AlC phase by high-temperature solution growth and slow cooling technique[J]. Acta Materialia, 304(2015).

[114] PINEK D, ITO T, IKEMOTO M et al. Electronic structure of V₂AlC[J]. Physical Review B(2018).

[115] KIM Y, GKOUNTARAS A, CHAIX-PLUCHERY O et al. Elementary processes governing V₂AlC chemical etching in HF[J]. RSC Advances, 25266(2020).

[116] WANG D, SI J, LIN S et al. Achieving macroscopic V₄C₃T_x MXene by selectively etching Al from V₄AlC₃ single crystals[J]. Inorganic Chemistry, 3239(2020).

[117] SHI O, XU L, JIANG A et al. Synthesis and oxidation resistance of MoAlB single crystals[J]. Ceramics International, 2446(2019).

[118] DAHLQVIST M, LU J, MESHKIAN R et al. Prediction and synthesis of a family of atomic laminate phases with Kagomé-like and in-plane chemical ordering[J]. Science Advances(2017).

[119] TAO Q, LU J, DAHLQVIST M et al. Atomically layered and ordered rare-earth i-MAX phases: a new class of magnetic quaternary compounds[J]. Chemistry of Materials, 2476(2019).

[120] PETRUHINS A, LU J, HULTMAN L et al. Synthesis of atomically layered and chemically ordered rare-earth (RE) i-MAX phases; (Mo_2/3RE_1/3)₂GaC with RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu[J]. Materials Research Letters, 446(2019).

[121] YANG J, LIU R, JIA N et al. Novel W-based in-plane chemically ordered (W_2/3R_1/3)₂AlC (R=Gd, Tb, Dy, Ho, Er, Tm and Lu) MAX phases and their 2D W_1.33C MXene derivatives[J]. Carbon, 76(2021).

[122] SUN S, MA Z, CHEN Z et al. The crystallographic structure and properties of novel quaternary nanolaminated rare-earth-Cr-based i-MAX phases[J]. Acta Materialia(2023).

[123] MESHKIAN R, DAHLQVIST M, LU J et al. W-based atomic laminates and their 2D derivative W_1.33C MXene with vacancy ordering[J]. Advanced Materials(2018).

[124] PETRUHINS A, DAHLQVIST M, LU J et al. Theoretical prediction and experimental verification of the chemically ordered atomic-laminate i-MAX phases (Cr_2/3Sc_1/3)₂GaC and (Mn_2/3Sc_1/3)₂GaC[J]. Crystal Growth & Design, 55(2019).

[125] LU J, THORE A, MESHKIAN R et al. Theoretical and experimental exploration of a novel in-plane chemically ordered (Cr_2/3M_1/3)₂AlC i-MAX phase with M= Sc and Y[J]. Crystal Growth & Design, 5704(2017).

[126] CHEN L, DAHLQVIST M, LAPAUW T et al. Theoretical prediction and synthesis of (Cr_2/3Zr_1/3)₂AlC i-MAX phase[J]. Inorganic Chemistry, 6237(2018).

[127] THÖRNBERG J, HALIM J, LU J et al. Synthesis of (V_2/3Sc_1/3)₂AlC i-MAX phase and V_2-xC MXene scrolls[J]. Nanoscale, 14720(2019).

[128] DAHLQVIST M, PETRUHINS A, LU J et al. Origin of chemically ordered atomic laminates (i-MAX): expanding the elemental space by a theoretical/experimental approach[J]. ACS Nano, 7761(2018).

[129] QI X X, SONG G P, YIN W L et al. Analysis on phase stability and mechanical property of newly-discovered ternary layered boride Cr₄AlB₄[J]. Journal of Inorganic Materials, 53(2020).

[130] BAI Y, QI X, HE X et al. Phase stability and weak metallic bonding within ternary-layered borides CrAlB, Cr₂AlB₂, Cr₃AlB₄, and Cr₄AlB₆[J]. Journal of the American Ceramic Society, 3715(2019).

[131] BAI Y, QI X, DUFF A et al. Density functional theory insights into ternary layered boride MoAlB[J]. Acta Materialia, 69(2017).

[132] KOTA S, ZAPATA-SOLVAS E, LY A et al. Synthesis and characterization of an alumina forming nanolaminated boride: MoAlB[J]. Scientific Reports, 26475(2016).

[133] LI N, BAI Y, WANG S et al. Rapid synthesis, electrical, and mechanical properties of polycrystalline Fe₂AlB₂ bulk from elemental powders[J]. Journal of the American Ceramic Society, 4407(2017).

[134] ZHANG H, DAI F Z, XIANG H et al. Crystal structure of Cr₄AlB₄: a new MAB phase compound discovered in Cr-Al-B system[J]. Journal of Materials Science & Technology, 530(2019).

[135] MCGUIRE M A, PARKER D S. Magnetic and structural properties of ferromagnetic Fe₅PB₂ and Fe₅SiB₂ and effects of Co and Mn substitutions[J]. Journal of Applied Physics(2015).

[136] ELMELIGY T A, KOTA S, NATU V et al. Synthesis, characterization, properties, first principles calculations, and X-ray photoelectron spectroscopy of bulk Mn₅SiB₂ and Fe₅SiB₂ ternary borides[J]. Journal of Alloys and Compounds(2021).

[137] ZHANG Q, ZHOU Y, SAN X et al. Zr₂SeB and Hf₂SeB: two new MAB phase compounds with the Cr₂AlC-type MAX phase (211 phase) crystal structures[J]. Journal of Advanced Ceramics, 1764(2022).

[138] QI X, HE X, YIN W et al. Stability trend, weak bonding, and magnetic properties of the Al-and Si-containing ternary-layered borides MAB phases[J]. Journal of the American Ceramic Society, 1513(2022).

[139] LU J, KOTA S, BARSOUM M W et al. Atomic structure and lattice defects in nanolaminated ternary transition metal borides[J]. Materials Research Letters, 235(2017).

[140] ZHANG H, KIM J Y, SU R et al. Defect behavior and radiation tolerance of MAB phases (MoAlB and Fe₂AlB₂) with comparison to MAX phases[J]. Acta Materialia, 505(2020).

[141] SUN Y, YANG A, DUAN Y et al. Electronic, elastic, and thermal properties, fracture toughness, and damage tolerance of TM₅Si₃B (TM=V and Nb) MAB phases[J]. International Journal of Refractory Metals and Hard Materials(2022).

[142] OKADA S, IIZUMI K, KUDAKA K et al. Single crystal growth of (Mo_xCr_1-x)AlB and (Mo_xW_1-x)AlB by metal Al solutions and properties of the crystals[J]. Journal of Solid State Chemistry, 36(1997).

[143] POTASHNIKOV D, CASPI E, PESACH A et al. Magnetic properties of (Fe_1-xMn_x)₂AlB₂ and the impact of substitution on the magnetocaloric effect[J]. Physical Review Materials(2020).

[144] HANNER L A, BADR H O, DAHLQVIST M et al. Synthesis, characterization and first principle modelling of the MAB phase solid solutions: (Mn_1-xCr_x)₂AlB₂ and (Mn_1-xCr_x)₃AlB₄[J]. Materials Research Letters, 112(2021).

[145] YAO B, LI S, MA P et al. Oxidation behavior of MoAl_0.97Si_0.03B solid solution at 1200-1400 ℃[J]. Materials Today Communications(2020).

[146] GUO Z, ZHOU J, SUN Z. New two-dimensional transition metal borides for Li ion batteries and electrocatalysis[J]. Journal of Materials Chemistry A, 23530(2017).

[147] DAHLQVIST M, ALLING B, ROSÉN J. Stability trends of MAX phases from first principles[J]. Physical Review B(2010).

[148] DAHLQVIST M, ROSEN J. Predictions of attainable compositions of layered quaternary i-MAB phases and solid solution MAB phases[J]. Nanoscale, 18311(2021).

[149] BAI Y, HE X, SUN Y et al. Chemical bonding and elastic properties of Ti₃AC₂ phases (A=Si, Ge, and Sn): a first-principle study[J]. Solid State Sciences, 1220(2010).

[150] BAI Y, QI X, HE X et al. Experimental and DFT insights into elastic, magnetic, electrical, and thermodynamic properties of MAB-phase Fe₂AlB₂[J]. Journal of the American Ceramic Society, 5837(2020).

[151] LIN L C, BERGER A H, MARTIN R L et al. In silico screening of carbon-capture materials[J]. Nature Materials, 633(2012).

[152] SU Y, FU H, BAI Y et al. Progress in materials genome engineering in China[J]. Acta Metallurgica Sinica, 1313(2020).

[153] YANG K, SETYAWAN W, WANG S et al. A search model for topological insulators with high-throughput robustness descriptors[J]. Nature Materials, 614(2012).

[154] WANG G, LI K, PENG L et al. High-throughput automatic integrated material calculations and data management intelligent platform and the application in novel alloys[J]. Acta Metallurgica Sinica, 75(2021).

[155] PENG L, MIAO N, WANG G et al. Novel metal oxides with promising high-temperature thermoelectric performance[J]. Journal of Materials Chemistry C, 12884(2021).

[156] GAN Y, HUANG Y, MIAO N et al. Novel IV-V-VI semiconductors with ultralow lattice thermal conductivity[J]. Journal of Materials Chemistry C, 4189(2021).

[157] GAN Y, MIAO N, LAN P et al. Robust design of high-performance optoelectronic chalcogenide crystals from high-throughput computation[J]. Journal of the American Chemical Society, 5878(2022).

[158] GAN Y, WANG G, ZHOU J et al. Prediction of thermoelectric performance for layered IV-V-VI semiconductors by high- throughput ab initio calculations and machine learning[J]. npj Computational Materials, 176(2021).

[159] ALAMEDA L T, LORD R W, BARR J A et al. Multi-step topochemical pathway to metastable Mo₂AlB₂ and related two- dimensional nanosheet heterostructures[J]. Journal of the American Chemical Society, 10852(2019).

[160] LIU Y, JIANG Z, JIANG X et al. New refractory MAB phases and their 2D derivatives: insight into the effects of valence electron concentration and chemical composition[J]. RSC Advances, 25836(2020).

[161] KHAZAEI M, WANG J, ESTILI M et al. Novel MAB phases and insights into their exfoliation into 2D MBenes[J]. Nanoscale, 11305(2019).

[162] MIAO N, WANG J, GONG Y et al. Computational prediction of boron-based MAX phases and MXene derivatives[J]. Chemistry of Materials, 6947(2020).

[163] ZHANG B, ZHOU J, SUN Z. MBenes: progress, challenges and future[J]. Journal of Materials Chemistry A, 15865(2022).

[164] XIANG H, FENG Z, LI Z et al. Theoretical investigations on mechanical and dynamical properties of MAlB (M= Mo, W) nanolaminated borides at ground-states and elevated temperatures[J]. Journal of Alloys and Compounds, 461(2018).

[165] SURUCU G, YILDIZ B, ERKISI A et al. The investigation of electronic, anisotropic elastic and lattice dynamical properties of MAB phase nanolaminated ternary borides: M₂AlB₂ (M=Mn, Fe and Co) under spin effects[J]. Journal of Alloys and Compounds(2020).

[166] KÁDAS K, IUŞAN D, HELLSVIK J et al. AlM₂B₂ (M=Cr, Mn, Fe, Co, Ni): a group of nanolaminated materials[J]. Journal of Physics: Condensed Matter(2017).

[167] QURESHI M W, ALI M, MA X. Screen the thermomechanical and optical properties of the new ductile 314 MAX phase boride Zr₃CdB₄: a DFT insight[J]. Journal of Alloys and Compounds(2021).

[168] ALI M, HOSSAIN M, ISLAM A et al. Ternary boride HF₃PB₄: insights into the physical properties of the hardest possible boride MAX phase[J]. Journal of Alloys and Compounds(2021).

[169] ZHANG H, XIANG H, DAI F Z et al. First demonstration of possible two-dimensional MBene CrB derived from MAB phase Cr₂AlB₂[J]. Journal of Materials Science & Technology, 2022(2018).

[170] ALAMEDA L T, MORADIFAR P, METZGER Z P et al. Topochemical deintercalation of Al from MoAlB: stepwise etching pathway, layered intergrowth structures, and two-dimensional MBene[J]. Journal of the American Chemical Society, 8833(2018).

[171] KHALEDIALIDUSTI R, KHAZAEI M, WANG V et al. Exploring structural, electronic, and mechanical properties of 2D hexagonal MBenes[J]. Journal of Physics: Condensed Matter(2021).

[172] XING S, ZHOU J, ZHANG B et al. Magnetic superexchange induced quantum phase transition in Cr₂B₂MBene[J]. The Journal of Physical Chemistry C, 14275(2022).

[173] ZHANG B, ZHOU J, GUO Z et al. Two-dimensional chromium boride MBenes with high HER catalytic activity[J]. Applied Surface Science(2020).

[174] JIANG Z, WANG P, JIANG X et al. MBene (MnB): a new type of 2D metallic ferromagnet with high Curie temperature[J]. Nanoscale Horizons, 335(2018).

[175] LIU X, GE X, DONG Y et al. First-principle calculations on the structure, electronic property and catalytic activity for hydrogen evolution reaction of 2D transition-metal borides[J]. Materials Chemistry and Physics(2020).

[176] GORKAN T, VATANSEVER E, AKINCI U M et al. Above room temperature ferromagnetism in Gd₂B₂ monolayer with high magnetic anisotropy[J]. The Journal of Physical Chemistry C, 12816(2020).

[177] GAO S, HAO J, ZHANG X et al. Two dimension transition metal boride Y₂B₂ as a promising anode in Li-ion and Na-ion batteries[J]. Computational Materials Science(2021).

[178] LI R, LIU Y, DENG H et al. A first-principles study of MBene as anode material for Mg-ion battery[J]. Journal of Electrochemical Energy Conversion and Storage(2020).

[179] XIAO Y, LI Y, GUO Z et al. Functionalized Mo₂B₂ MBenes: promising anchoring and electrocatalysis materials for Lithium-sulfur battery[J]. Applied Surface Science(2021).

[180] ZHANG T, ZHANG B, PENG Q et al. Mo₂B₂ MBene-supported single-atom catalysts as bifunctional HER/OER and OER/ORR electrocatalysts[J]. Journal of Materials Chemistry A, 433(2021).

[181] GUO X, LIN S, GU J et al. Establishing a theoretical landscape for identifying basal plane active 2D metal borides (MBenes) toward nitrogen electroreduction[J]. Advanced Functional Materials(2021).

[182] SUN X, ZHENG J, GAO Y et al. Machine-learning-accelerated screening of hydrogen evolution catalysts in MBenes materials[J]. Applied Surface Science(2020).

[183] LI S, SUN W, LUO Y et al. Pushing the limit of thermal conductivity of MAX borides and MABs[J]. Journal of Materials Science & Technology, 79(2022).

[184] FENG S, MIAO N, WANG J. Hexagonal MBene (Hf₂BO₂): a promising platform for the electrocatalysis of hydrogen evolution reaction[J]. ACS Applied Materials & Interfaces, 56131(2021).

[185] WANG S, MIAO N, SU K et al. Discovery of intrinsic two-dimensional antiferromagnets from transition-metal borides[J]. Nanoscale, 8254(2021).

[186] DAI F-Z, XIANG H, SUN Y et al. M₂M'AlB₄ (M=Mn, Fe, Co, M'= Cr, Mo, W): theoretical predicted ordered MAB phases with Cr₃AlB₄ crystal structure[J]. Journal of Materials Science & Technology, 1432(2019).

[187] YAO Y, MIAO N, GONG Y et al. Theoretical exploration of quaternary hexagonal MAB phases and two-dimensional derivatives[J]. Nanoscale, 13208(2021).

[188] NAIR V G, BIROWSKA M, BURY D et al. 2D MBenes: a novel member in the flatland[J]. Advanced Materials(2022).

[189] MORGAN D, CEDER G[M]. Handbook of Materials Modeling:Methods(2005).

[190] FRIEDRICH W, KNIPPING P, LAUE M. Interferenzerscheinungen bei roentgenstrahlen[J]. Annalen der Physik, 971(1913).

[191] BRAGG W L. The structure of some crystals as indicated by their diffraction of X-rays[J]. Proceedings of the Royal Society of London. Series A, 248(1913).

[192] WOLVERTON C, YAN X-Y, VIJAYARAGHAVAN R et al. Incorporating first-principles energetics in computational thermodynamics approaches[J]. Acta Materialia, 2187(2002).

[193] ASTA M, OZOLINS V, WOODWARD C. A first-principles approach to modeling alloy phase equilibria[J]. JOM, 16(2001).

[194] BLUM V, ZUNGER A. Mixed-basis cluster expansion for thermodynamics of bcc alloys[J]. Physical Review B(2004).

[195] CURTAROLO S, MORGAN D, CEDER G. Accuracy of ab initio methods in predicting the crystal structures of metals: a review of 80 binary alloys[J]. Calphad, 163(2005).

[196] CHELIKOWSKY J R[J]. Digital Encyclopedia of Applied Physics: Cohesive Energy(2002).

[197] VILLARS P. Factors governing crystal structures[J]. Principles(1994).

[198] BURDETT J K, RODGERS J R. Structure & property maps for inorganic solids[J]. John Wiley & Son. Ltd.: Encyclopedia of Inorganic Chemistry(2006).

[199] RAJAN K[M]. Informatics for materials science and engineering(2013).

[200] PETTIFOR D. Structure maps revisited[J]. Journal of Physics: Condensed Matter, V13(2003).

[201] MOOSER E, PEARSON W. On the crystal chemistry of normal valence compounds[J]. Acta Crystallographica, 1015(1959).

[202] ZUNGER A. Structural stability of 495 binary compounds[J]. Physical Review Letters, 582(1980).

[203] VILLARS P. Three-dimensional structural stability diagrams for 648 binary AB₃ and 389 binary A₃B₅ intermetallic compounds: III[J]. Journal of the Less Common Metals, 199(1984).

[204] VILLARS P. A three-dimensional structural stability diagram for 1011 binary AB₂ intermetallic compounds: II[J]. Journal of the Less Common Metals, 33(1984).

[205] VILLARS P. A three-dimensional structural stability diagram for 998 binary AB intermetallic compounds[J]. Journal of the Less Common Metals, 215(1983).

[206] PETTIFOR D G. A chemical scale for crystal-structure maps[J]. Solid State Communications, 31(1984).

[207] PETTIFOR D. The structures of binary compounds. I. Phenomenological structure maps[J]. Journal of Physics C: Solid State Physics, 285(1986).

[208] ZHOU A, BASU S, BARSOUM M. Kinking nonlinear elasticity, damping and microyielding of hexagonal close-packed metals[J]. Acta Materialia, 60(2008).

[209] KONTSOS A, LOUTAS T, KOSTOPOULOS V et al. Nanocrystalline Mg-MAX composites: mechanical behavior characterization via acoustic emission monitoring[J]. Acta Materialia, 5716(2011).

[210] BARSOUM M, ZHEN T, KALIDINDI S et al. Fully reversible, dislocation-based compressive deformation of Ti₃SiC₂ to 1 GPa[J]. Nature Materials, 107(2003).

[211] AMINI S, NI C, BARSOUM M W. Processing, microstructural characterization and mechanical properties of a Ti₂AlC/nanocrystalline Mg-matrix composite[J]. Composites Science and Technology, 414(2009).

[212] ANASORI B, EL’AD N C, BARSOUM M W. Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti₂AlC particles[J]. Materials Science and Engineering: A, 511(2014).

[213] CHEN W, YU W, MA C et al. A review of novel ternary nano-layered MAX phases reinforced AZ₉₁D magnesium composite[J]. Journal of Magnesium and Alloys, 1457(2022).

[214] GUPTA S, BARSOUM M. On the tribology of the MAX phases and their composites during dry sliding: a review[J]. Wear, 1878(2011).

[216] ZHAO H, FENG Y, ZHOU Z et al. Effect of electrical current density, apparent contact pressure, and sliding velocity on the electrical sliding wear behavior of Cu-Ti₃AlC₂ composites[J]. Wear(2020).

[217] YANG K, MA H, ZHAO W et al. Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti₃SiC₂[J]. Tribology International(2020).

[218] WANG D, TIAN W, MA A et al. Anisotropic properties of Ag/Ti₃AlC₂ electrical contact materials prepared by equal channel angular pressing[J]. Journal of Alloys and Compounds, 431(2019).

[219] WANG D D, TIAN W B, DING J X et al. Anisotropic arc erosion resistance of Ag/Ti₃AlC₂ composites induced by the alignment of Ti₃AlC₂[J]. Corrosion Science(2020).

[220] HUANG X, FENG Y, GE J et al. Arc erosion mechanism of Ag-Ti₃SiC₂ material[J]. Journal of Alloys and Compounds(2020).

[221] DING J, TIAN W, WANG D et al. Corrosion and degradation mechanism of Ag/Ti₃AlC₂ composites under dynamic electric arc discharge[J]. Corrosion Science, 147(2019).

[222] LIU Y, JI C, SU X et al. Electromagnetic and microwave absorption properties of Ti₃SiC₂ powders decorated with Ag particles[J]. Journal of Alloys and Compounds(2020).

[223] WANG D, TIAN W, DING J et al. The beauty and the deed of silver during arc erosion of Ag/Ti₃AlC₂ contacts[J]. Journal of Alloys and Compounds(2020).

[224] HU W, HUANG Z, CAI L et al. In-situ TiC and γ′-Ni₃(Al,Ti) triggered microstructural modification and strengthening of Ni matrix composite by reactive hot-press sintering pure Ni and Ti₂AlC precursor[J]. Journal of Alloys and Compounds, 1043(2018).

[225] HUANG X, GAO Y, WANG Z et al. Microstructure, mechanical properties and strengthening mechanisms of in-situ prepared (Ti₅Si₃+TiC_0.67)/TC₄ composites[J]. Journal of Alloys and Compounds, 907(2019).

[226] HUANG Z, BONNEVILLE J, ZHAI H et al. Microstructural characterization and compression properties of TiC_0.61/Cu(Al) composite synthesized from Cu and Ti₃AlC₂ powders[J]. Journal of Alloys and Compounds, 53(2014).

[227] LI M, ZHAI H, HUANG Z et al. Tensile behavior and strengthening mechanism in ultrafine TiC_0.5 particle reinforced Cu-Al matrix composites[J]. Journal of Alloys and Compounds, 186(2015).

[228] HU W, HUANG Z, CAI L et al. Microstructural characterization and mechanical properties of a novel TiC-based cermet bonded with Ni₃(Al,Ti) and NiAl duplexalloy[J]. Materials Characterization, 295(2018).

[229] HU W, HUANG Z, CAI L et al. Exploring the interfacial state and tensile behaviors in nickel matrix composite with in-situ TiC and γ′-Ni₃(Al,Ti) reinforcements[J]. Journal of Alloys and Compounds, 987(2018).

[230] HU W, HUANG Z, YU Q et al. Investigation on high temperature mechanical behaviors of TiC-γ′ reinforced Ni composite[J]. Metals and Materials International, 3003(2021).

[231] JIAO Y, HUANG Z, HU W et al. In-situ hybrid Cr₃C₂ and γ′-Ni₃(Al,Cr) strengthened Ni matrix composites: microstructure and enhanced properties[J]. Materials Science and Engineering: A(2021).

[232] LI X, HUANG Z, WANG H et al. Ni composites reinforced with ultrafine and uniform TiC_x and Cr₃C₂ particles in situ: enhanced properties and a well-matched interface[J]. Materials Science and Engineering: A(2022).

[233] YU Q, HUANG Z, ZHENG G et al. Thermal shock behavior of a novel TiC_x-Ni₃(Al,Ti)/Ni functionally graded composite[J]. Metals and Materials International, 5133(2021).

[234] HU W, HUANG Z, YU Q et al. Ti₂AlC triggered in-situ ultrafine TiC/Inconel 718 composites: microstructure and enhanced properties[J]. Journal of Materials Science & Technology, 70(2020).

[235] YU Q, HUANG Z, HU W et al. High strength and toughness of in-situ TiC/In718 functionally gradient material by using Ti₃AlC₂ as a precursor[J]. Journal of Alloys and Compounds(2022).

[236] CHIKER N, BENAMOR A, HADDAD A et al. Pressureless sintering and tribological properties of in-situ TiC-Ni₃(Al,Ti)/ Ni(Al,Ti) composites[J]. International Journal of Refractory Metals and Hard Materials(2021).

[237] ZHANG F, DU M, FAN K et al. Fabrication and mechanical properties of network structured titanium alloy matrix composites reinforced with Ti₂AlC particulates[J]. Materials Science and Engineering: A(2020).

[238] WANG H, HUANG Z, LI X et al. Microstructure and properties of TiC_x/TC₄ composites with a quasi-network structure prepared by the decomposition of the Ti₂AlC precursor[J]. Journal of Alloys and Compounds(2022).

[239] SUN Y, ZHOU C, ZHAO Z et al. Microstructure and mechanical properties of Ti₂AlC particle and in-situ TiAl₃ reinforced pure Al composites[J]. Materials Science and Engineering: A(2020).

[240] WANG Y, HUANG Z, HU W et al. Microstructure and mechanical behaviors of Ti₃AlC₂ triggered in-situ Al₃Ti and TiC reinforced 2024Al composite[J]. Journal of Materials Research and Technology, 289(2022).

[241] ZHUANG W, HUANG Z, HU W et al. Microstructure characterization and enhanced mechanical properties of quasi- continuous network structured Ti₃AlC₂-Al₃Ti/2024Al composite[J]. Materials Characterization(2022).

[242] BARSOUM M, FARBER L. Room-temperature deintercalation and self-extrusion of Ga from Cr₂GaN[J]. Science, 937(1999).

[243] BARSOUM M W, HOFFMAN E N, DOHERTY R D et al. Driving force and mechanism for spontaneous metal whisker formation[J]. Physical Review Letters(2004).

[244] ZHANG P, LIU Y, DING J et al. Controllable growth of Ga wires from Cr₂GaC-Ga and its mechanism[J]. Physica B: Condensed Matter, 90(2015).

[245] LIU Y, ZHANG P, LING C et al. Spontaneous Sn whisker formation on Ti₂SnC[J]. Journal of Materials Science: Materials in Electronics, 5788(2017).

[246] TANG J, ZHANG P, LIU Y et al. Selective growth of tin whiskers from its alloys on Ti₂SnC[J]. Journal of Materials Science & Technology, 206(2020).

[247] ZHANG J, LIU B, WANG J et al. Low-temperature instability of Ti₂SnC: a combined transmission electron microscopy, differential scanning calorimetry, and X-ray diffraction investigations[J]. Journal of Materials Research, 39(2009).

[248] ZHANG P, ZHANG Y, SUN Z. Spontaneous growth of metal whiskers on surfaces of solids: a review[J]. Journal of Materials Science & Technology, 675(2015).

[249] LIU Y, LU C, ZHANG P et al. Mechanisms behind the spontaneous growth of tin whiskers on the Ti₂SnC ceramics[J]. Acta Materialia, 433(2020).

[250] LI C F, LIU Z Q. Microstructure and growth mechanism of tin whiskers on RESn₃ compounds[J]. Acta Materialia, 589(2013).

[251] PEI F, BUCHOVECKY E, BOWER A et al. Stress evolution and whisker growth during thermal cycling of Sn films: a comparison of analytical modeling and experiments[J]. Acta Materialia, 462(2017).

[252] DELHAISE A M, BAGHERI Z, MESCHTER S et al. Tin whisker growth on electronic assemblies soldered with Bi-containing, Pb-free alloys[J]. Journal of Electronic Materials, 842(2021).

[253] CHASON E, JADHAV N, PEI F et al. Growth of whiskers from Sn surfaces: driving forces and growth mechanisms[J]. Progress in Surface Science, 103(2013).

[254] KIRSCH M, GONZALEZ O, AGUILAR M et al[report]. NASA engineering and safety center technical assessment report: national highway traffic safety administration Toyota unintended acceleration investigation(2023). https://static.nhtsa.gov/odi/inv/2014/INRP-DP14003-61483.pdf

[255] SMETANA J. Theory of tin whisker growth: “the end game”[J]. IEEE Transactions on Electronics Packaging Manufacturing, 11(2007).

[257] ZHANG P, SHEN L, OUYANG J et al. Room temperature mushrooming of gallium wires and its growth mechanism[J]. Journal of Alloys and Compounds, 488(2015).

[258] ZHANG Q, TIAN Z, ZHANG P et al. Rapid and massive growth of tin whisker on mechanochemically decomposed Ti₂SnC[J]. Materials Today Communications(2022).

[259] LIU Y, ZHANG P, YU J et al. Confining effect of oxide film on tin whisker growth[J]. Journal of Materials Science & Technology, 1735(2019).

[261] TIAN Z, ZHANG P, ZHANG Y et al. Tin whisker growth from titanium-tin intermetallic and the mechanism[J]. Journal of Materials Science & Technology, 79(2022).

[262] LI S, LIU Y, ZHANG P et al. Interface energy-driven indium whisker growth on ceramic substrates[J]. Journal of Materials Science: Materials in Electronics, 16881(2021).

[263] EL-RAGHY T, BARSOUM M. Growing metallic whiskers: alternative interpretation[J]. Science, 1355(1999).

[264] LU C, LIU Y, FANG J et al. Isotope study reveals atomic motion mechanism for the formation of metal whiskers in MAX phase[J]. Acta Materialia(2021).

[265] HOFFMAN E N, BARSOUM M W, WANG W et al. On the spontaneous growth of soft metallic whiskers[conf-proc]. Proceedings of the Fifty-First IEEE Holm Conference on Electrical Contacts, 121(2005).

[267] ZHANG Q, TANG J, TANG H et al. Method for inhibiting Sn whisker growth on Ti₂SnC[J]. Journal of Materials Science, 20462(2022).

[268] HAN M, GOGOTSI Y. Perspectives for electromagnetic radiation protection with MXenes[J]. Carbon, 17(2023).

[269] BAI P, WANG S, ZHAO B et al. Electrically conductive and corrosion resistant MAX phases with superior electromagnetic wave shielding performance[J]. Journal of the European Ceramic Society, 7414(2022).

[270] LI S, TAN Y, XUE J et al. Electromagnetic interference shielding performance of nano-layered Ti₃SiC₂ ceramics at high-temperatures[J]. AIP Advances(2018).

[271] TAN Y, LUO H, ZHOU X et al. Dependences of microstructure on electromagnetic interference shielding properties of nano-layered Ti₃AlC₂ ceramics[J]. Scientific Reports, 7935(2018).

[272] TAN Y, LUO H, ZHANG H et al. High-temperature electromagnetic interference shielding of layered Ti₃AlC₂ ceramics[J]. Scripta Materialia, 471(2017).

[273] FAN X, YIN X, CHEN L et al. Mechanical behavior and electromagnetic interference shielding properties of C/SiC-Ti₃Si(Al)C₂[J]. Journal of the American Ceramic Society, 1717(2016).

[274] ZHONG Z, ZHANG B, YE J et al. Tailorable microwave absorption properties of macro-porous core@shell structured SiC@Ti₃SiC₂via molten salt shielded synthesis (MS₃) method in air[J]. Journal of Alloys and Compounds(2022).

[275] ZHANG Y, WEN J, ZHANG L et al. High antioxidant lamellar structure Cr₂AlC: dielectric and microwave absorption properties in X band[J]. Journal of Alloys and Compounds(2021).

[276] YAO P, QIAN Y, LI W et al. Exploration of dielectric and microwave absorption properties of quaternary MAX phase ceramic (Cr_2/3Ti_1/3)₃AlC₂[J]. Ceramics International, 22919(2020).

[277] LI J, XU T, BAI H et al. Structural modifications and electromagnetic property regulations of Ti₃AlC₂ MAX for enhancing microwave absorption through the strategy of Fe doping[J]. Advanced Materials Interfaces(2022).

[278] ZHANG H, ZHAO B, XIANG H et al. Electromagnetic wave absorbing properties of Cr₂AlB₂ powders and the effect of high- temperature oxidation[J]. Journal of the American Ceramic Society, 2213(2021).

[279] SHAHZAD F, IQBAL A, KIM H et al. 2D transition metal carbides (MXenes): applications as an electrically conducting material[J]. Advanced Materials(2020).

[280] SHAHZAD F, ALHABEB M, HATTER C B et al. Electromagnetic interference shielding with 2D transition metal carbides (MXenes)[J]. Science, 1137(2016).

[281] HAN M, YIN X, WU H et al. Ti₃C₂ MXenes with modified surface for high-performance electromagnetic absorption and shielding in the X-band[J]. ACS Applied Materials & Interfaces, 21011(2016).

[282] HAN M, SHUCK C E, RAKHMANOV R et al. Beyond Ti₃C₂T_x: MXenes for electromagnetic interference shielding[J]. ACS Nano, 5008(2020).

[283] ZHANG J, KONG N, UZUN S et al. Scalable manufacturing of free-standing, strong Ti₃C₂T_x MXene films with outstanding conductivity[J]. Advanced Materials(2020).

[284] YUN T, KIM H, IQBAL A et al. Electromagnetic shielding of monolayer MXene assemblies[J]. Advanced Materials(2020).

[285] MATHIS T S, MALESKI K, GOAD A et al. Modified MAX phase synthesis for environmentally stable and highly conductive Ti₃C₂ MXene[J]. ACS Nano, 6420(2021).

[286] HAN M, SHUCK C E, SINGH A et al. Efficient microwave absorption with V_n+1C_nT_x MXenes[J]. Cell Reports Physical Science(2022).

[287] HAN M, ZHANG D, SHUCK C E et al. Electrochemically modulated interaction of MXenes with microwaves[J]. Nature Nanotechnology, 373(2023).

[288] MIRKHANI S A, SHAYESTEH ZERAATI A, ALIABADIAN E et al. High dielectric constant and low dielectric loss via poly (vinyl alcohol)/Ti₃C₂T_x MXene nanocomposites[J]. ACS Applied Materials & Interfaces, 18599(2019).

[289] WEN C, LI X, ZHANG R et al. High-density anisotropy magnetism enhanced microwave absorption performance in Ti₃C₂T_x MXene@Ni microspheres[J]. ACS Nano, 1150(2021).

[290] LI X, YIN X, SONG C et al. Self-assembly core-shell graphene- bridged hollow MXenes spheres 3D foam with ultrahigh specific EM absorption performance[J]. Advanced Functional Materials(2018).

[291] LI M, ZHU W, LI X et al. Ti₃C₂T_x/MoS₂ self-rolling rod-based foam boosts interfacial polarization for electromagnetic wave absorption[J]. Advanced Science(2022).

[292] LI M, HAN M, ZHOU J et al. Novel scale-like structures of graphite/TiC/Ti₃C₂ hybrids for electromagnetic absorption[J]. Advanced Electronic Materials(2018).

[293] KNASTER J, MOESLANG A, MUROGA T. Materials research for fusion[J]. Nature Physics, 424(2016).

[294] ZINKLE S J, BUSBY J T. Structural materials for fission & fusion energy[J]. Materials Today, 12(2009).

[295] WANG C, YANG T, TRACY C L et al. Disorder in M_n+1AX_n phases at the atomic scale[J]. Nature Communications, 622(2019).

[296] LE FLEM M, LIU X, DORIOT S et al. Irradiation damage in Ti₃(Si,Al)C₂: a TEM investigation[J]. International Journal of Applied Ceramic Technology, 766(2010).

[297] YANG T, WANG C, TAYLOR C A et al. The structural transitions of Ti₃AlC₂ induced by ion irradiation[J]. Acta Materialia, 351(2014).

[298] WANG C, YANG T, XIAO J et al. Structural transitions induced by ion irradiation in V₂AlC and Cr₂AlC[J]. Journal of the American Ceramic Society, 1769(2016).

[299] WANG C, YANG T, XIAO J et al. Irradiation-induced structural transitions in Ti₂AlC[J]. Acta Materialia, 197(2015).

[300] YANG T, WANG C, LIU W et al. Formation of nano-twinned structure in Ti₃AlC₂ induced by ion-irradiation[J]. Acta Materialia, 1(2017).

[301] DENG T, SUN J, TAI P et al. Ti₃AlC₂, a candidate structural material for innovative nuclear energy system: the microstructure phase transformation and defect evolution induced by energetic heavy-ion irradiation[J]. Acta Materialia, 188(2020).

[302] ZHAO S, CHEN L, XIAO H et al. Phase transformation and amorphization resistance in high-entropy MAX phase M₂SnC (M= Ti, V, Nb, Zr, Hf) under in-situ ion irradiation[J]. Acta Materialia(2022).

[303] WANG C, TRACY C L, EWING R C. Radiation effects in M_n+1AX_n phases[J]. Applied Physics Reviews(2020).

[304] LIU S, YANG T, ZHANG J et al. Thermal effects in ion irradiated Ti₂AlC and Ti₃SiC₂[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 50(2018).

[305] LIU S, WANG C, YANG T et al. High temperature effects on irradiation damage of Ti₂AlC[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 662(2017).

[306] IMTYAZUDDIN M, MIR A H, TUNES M A et al. Radiation resistance and mechanical properties of magnetron-sputtered Cr₂AlC thin films[J]. Journal of Nuclear Materials(2019).

[307] QARRA H, KNOWLES K, VICKERS M et al. Heavy ion irradiation damage in Zr₂AlC MAX phase[J]. Journal of Nuclear Materials, 1(2019).

[308] TUNCA B, GREAVES G, HINKS J et al. In situ He⁺ irradiation of the double solid solution (Ti_0.5,Zr_0.5)₂(Al_0.5,Sn_0.5)C MAX phase: defect evolution in the 350-800 °C temperature range[J]. Acta Materialia(2021).

[309] TUNES M A, IMTYAZUDDIN M, KAINZ C et al. Deviating from the pure MAX phase concept: radiation-tolerant nanostructured dual-phase Cr₂AlC[J]. Science Advances(2021).

[310] ZHANG Z, ARMSTRONG D E, GRANT P S. The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives[J]. Progress in Materials Science(2022).

[311] ZHANG Y, OSETSKY Y N, WEBER W J. Tunable chemical disorder in concentrated alloys: defect physics and radiation performance[J]. Chemical Reviews, 789(2021).

[312] ROST C M, SACHET E, BORMAN T et al. Entropy-stabilized oxides[J]. Nature Communications, 8485(2015).

[313] OSES C, TOHER C, CURTAROLO S. High-entropy ceramics[J]. Nature Reviews Materials, 295(2020).

[314] XIANG H, XING Y, DAI F Z et al. High-entropy ceramics: present status, challenges, and a look forward[J]. Journal of Advanced Ceramics, 385(2021).

[315] BAO W, WANG X G, DING H et al. High-entropy M₂AlC-MC (M= Ti, Zr, Hf, Nb, Ta) composite: synthesis and microstructures[J]. Scripta Materialia, 33(2020).

[316] DU Z, WU C, CHEN Y et al. High-entropy carbonitride MAX phases and their derivative MXenes[J]. Advanced Energy Materials(2022).

[317] CHEN L, LI Y, CHEN K et al. Synthesis and characterization of medium-/high-entropy M₂SnC (M = Ti/V/Nb/Zr/Hf) MAX phases[J]. Small Structures(2022).

[318] BAI X, DENG Q, QIAO Y et al. A theoretical investigation and synthesis of layered ternary carbide system U-Al-C[J]. Ceramics International, 1646(2018).