[1] [1] 景喜双，张鹏飞，王志佳，等.数字化组合测量辅助飞机装配质量检测技术［J］.北京航空航天大学学报，2015，41（7）：1196-1201. doi: 10.13700/j.bh.1001-5965.2014.0635JINGX SH， ZHANGP F， WANGZH J， et al.. Digital combined measuring technology assisted quality inspection for aircraft assembly ［J］. Journal of Beijing University of Aeronautics and Astronautics，2015，41（7）：1196-1201. （in Chinese）. doi: 10.13700/j.bh.1001-5965.2014.0635

[2] [2] 张柏楠，马晓兵，郑伟，等.中国载人交会对接技术的设计与实现［J］.中国科学：技术科学，2014，44（1）：1-11. doi: 10.1360/092013-1219ZHANGB N， MAX B， ZHENGW， et al.. Design and implementation of China's manned rendezvous and docking technology ［J］. Scientia Sinica（Technologica）， 2014，44（1）：1-11. （in Chinese）. doi: 10.1360/092013-1219

[3] K XU, S XU, Q QI. Research on high-precision positioning method of robot based on laser tracker. Intelligent Service Robotics, 16, 361-371(2023).

[4] K KAMAL, A JOUBAIR, I BONEV et al. Elasto-geometrical calibration of an industrial robot under multidirectional external loads using a laser tracker, 4320-4327(2016).

[5] [5] 高星斗，白静，张平，等.发射箱车载倾斜发射过程下沉量影响因素研究［J］.导弹与航天运载技术，2015（2）：58-62. doi: 10.7654/j.issn.1004-7182.20150214GAOX D， BAIJ， ZHANGP， et al.. Study on influence factors of falling quantity for a slant-launched missile launch container in vehicular launching process ［J］. Missiles and Space Vehicles， 2015（2）：58-62. （in Chinese）. doi: 10.7654/j.issn.1004-7182.20150214

[6] [6] 魏振忠.舰载机着舰位姿视觉测量技术概述［J］.测控技术，2020，39（8）：2-6. doi: 10.19708/j.ckjs.2020.08.001WEIZH ZH. Overview of visual measurement technology for landing position and attitude of carrier-based aircraft ［J］. Measurement & Control Technology， 2020，39（8）：2-6. （in Chinese）. doi: 10.19708/j.ckjs.2020.08.001

[7] [7] 王志臣，陈涛，曹玉岩，等.大口径望远镜中间体拓扑优化及形位公差检测［J］.光学精密工程，2022，30（23）：3039-3044. doi: 10.37188/ope.20223023.3039WANGZH CH， CHENT， CAOY Y， et al.. Design and geometrical tolerance detection of center section of large-aperture telescope ［J］. Optics and Precision Engineering， 2022，30（23）：3039-3044. （in Chinese）. doi: 10.37188/ope.20223023.3039

[8] G N PEGGS, P G MAROPOULOS, E B HUGHES et al. Recent developments in large-scale dimensional metrology. Proceedings of the Institution of Mechanical Engineers， Part B： Journal of Engineering Manufacture, 223, 571-595(2009).

[9] B MURALIKRISHNAN, S PHILLIPS, D SAWYER. Laser trackers for large-scale dimensional metrology： a review. Precision Engineering, 44, 13-28(2016).

[10] K LAU, R HOCKEN, W HAIGHT. Automatic laser tracking interferometer system for robot metrology. Precision Engineering, 8, 3-8(1986).

[11] L EVERETT, M DRIELS, C DIVISION. Applications of modeling and identification to improve machine performance, 6(1991).

[12] H Q ZHUANG, Z S ROTH. Modeling gimbal axis misalignments and mirror center offset in a single-beam laser tracking measurement system. The International Journal of Robotics Research, 14, 211-224(1995).

[13] R LOSER, S KYLE. Alignment and field check procedures for leica laser tracker LTD500. Boeing Large Scale Optical Metrology Seminar(1999).

[14] X R CHEN, P S CAI. Dynamic measuring the position of a moving object based on laser tracking system. Chinese Journal of Scientific Instrument, 25, 777-780(2004).

[15] [15] 梁智勇.激光跟踪测量系统误差分析与补偿技术研究［D］.焦作：河南理工大学，2006.LIANGZH Y. Study of Error Analysis and Compensation Technology of Laser Tracker System ［D］. Jiaozuo： Henan Polytechnic University， 2006. （in Chinese）

[16] [16] 张和君，马俊杰，张军.激光跟踪仪多参数误差模型与标定［J］.仪器仪表学报，2020， 41（9）：20-30. doi: 10.19650/j.cnki.cjsi.J2006730ZHANGH J， MAJ J， ZHANGJ. Multi parameter error model and calibration of laser tracker ［J］. Chinese Journal of Scientific Instrument， 2020， 41（9）：20-30. （in Chinese）. doi: 10.19650/j.cnki.cjsi.J2006730

[17] X P CHEN, Y Y LIU, Y XU et al. Kinematic calibration of a laser tracker based on nonlinear optimization of a refined geometric error model. Measurement, 191, 110672(2022).

[18] [18] 张滋黎，朱涵，周维虎.激光跟踪仪转镜倾斜误差的标定及修正［J］.光学精密工程，2015，23（5）：1205-1212. doi: 10.3788/ope.20152305.1205ZHANGZ L， ZHUH， ZHOUW H. Error calibration and correction of mirror tilt in laser trackers ［J］. Optics and Precision Engineering， 2015，23（5）：1205-1212. （in Chinese）. doi: 10.3788/ope.20152305.1205

[19] [19] 崔成君，劳达宝，高书苑，等.飞秒激光跟踪仪光轴与竖轴同轴度的标定［J］.光学精密工程，2016，24（11）：2651-2657. doi: 10.3788/ope.20162411.2651CUICH J， LAOD B， GAOSH Y， et al.. Calibration for coaxiality of optical axis and vertical rotary shaft in femtosecond laser tracker ［J］. Optics and Precision Engineering， 2016，24（11）：2651-2657. （in Chinese）. doi: 10.3788/ope.20162411.2651

[20] B MURALIKRISHNAN, D SAWYER, C BLACKBURN et al. ASME B89.4.19 performance evaluation tests and geometric misalignments in laser trackers. Journal of Research of the National Institute of Standards and Technology, 114, 21-35(2009).

[21] J CONTE, J SANTOLARIA, A MAJARENA et al. Identification and kinematic calculation of laser tracker errors. Procedia Engineering, 63, 379-387(2013).

[22] J CONTE, J SANTOLARIA, A MAJARENA et al. Modelling， kinematic parameter identification and sensitivity analysis of a laser tracker having the beam source in the rotating head. Measurement, 89, 261-272(2016).

[23] [23] 郜晋伟，孟立新，李小明，等.基于最小二乘圆拟合法的三轴转台垂直度误差测试［J］.中国测试，2020，46（4）：123-129. doi: 10.11857/j.issn.1674-5124.2019090015GAOJ W， MENGL X， LIX M， et al.. The verticality error test of three-axis turntable based on least square circle fitting method ［J］. China Measurement & Test， 2020，46（4）：123-129. （in Chinese）. doi: 10.11857/j.issn.1674-5124.2019090015