[1] [1] BLEY P.The LIGA process for fabrication of 3D microscale structures［J］.Interdisc.Sci.Rev.1993,18:267-271.

[2] [2] EHRFELD W, LEHR H.Deep X-ray lithography for the production of 3D microstructures［J］.Radiat.Phys.Chem.1995,45(3):349-365.

[3] [3] COHN M B, BHRINGER K F,NOVOROLSKI J M, et al..Microassembly technologies for MEMS［J］.SPIE,1998,3512:2-16.

[4] [4] MOHR J, BLEY P, WALLRABE U.Microactuators fabricated by the LIGA process［J］.J.Micromech.Microeng,1992,2:234-241.

[5] [5] HU G W, LIU Z W, HOU ZH H, et al..Novel process for fabrication of RF MEMS switch with high mechanical reliability［J］.Opt.Precision Eng., 2004,16(7):1213-1217.(in Chinese)

[6] [6] ZHANG X, FEI Y T.Design and optimization of a multidimensional acceleration sensor［J］.China Measurement Technology, 2007,33(3):133-135.(in Chinese)

[7] [7] MENG M Y,LIU J,SHI Y B.Research on composite-beam accelerometer［J］.Chinese Journal of Sensors and Actuators, 2008,21(3):443-445.(in Chinese)

[8] [8] LIU Y,WEN ZH Y,ZHANG L Q, et al..Researching status and developing tendency of microaccelerometer［J］.Opt.Precision Eng., 2004,12(3):81-86.(in Chinese)

[9] [9] JIA Y B, HE Y L, ZHANG R.Micromachined resonant bulk-silicon accelerometer［J］.Opt.Precision Eng., 2004,12(3):284-287.(in Chinese)

[10] [10] CHEN G Y, HE X P, SHI ZH G, et al..Fabrication of UV-LIGA micro acceleration switch［J］.Micronanoelectronic Technology, 2003,7(8):312-313.(in Chinese)

[11] [11] CHEN G Y, WU J L, ZHAO L.Development of micro-mechanical G-switch［J］.Journal of Transducer Technology, 2005,24(6):82-84.(in Chinese)

[12] [12] ZHU X L, GUO Y H, LIU G, et al..SU-8 lithography process in fabrication of transparent micro fluidic chips［J］.Journal of Functional Materials and Devices, 2008,14(2):426-429.(in Chinese)

[13] [13] ZENG H L, WU ZH D,CHEN J W, et al..Plating Manual［M］.Beijing: Mechanical Industry Press, 1997:188-209.(in Chinese)