[1] Al-Sayed Ali S, Hussein A, Nofal A et al. Laser powder cladding of Ti-6Al-4V α/β alloy[J]. Materials, 10, 1178(2017). http://www.ncbi.nlm.nih.gov/pubmed/29036935

[2] Zhang T G, Zhuang H F, Xue P et al. Microstructure refinement mechanism and properties of Ti-based rare earth laser cladding layers[J]. Acta Aeronautica et Astronautica Sinica, 41, 423553(2020).

[3] Wang H, Wu M L, Lu P P et al. Effect of laser power on mechanical properties of cobalt-based/GO composite coatings[J]. Laser & Optoelectronics Progress, 57, 091405(2020).

[4] Tijo D, Masanta M. In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-II. Mechanical performance[J]. Surface and Coatings Technology, 344, 579-589(2018).

[5] Farayibi P K, Folkes J, Clare A et al. Cladding of pre-blended Ti-6Al-4V and WC powder for wear resistant applications[J]. Surface and Coatings Technology, 206, 372-377(2011).

[6] Zhang K M, Zou J X, Li J et al. Surface modification of TC4 Ti alloy by laser cladding with TiC+Ti powders[J]. Transactions of Nonferrous Metals Society of China, 20, 2192-2197(2010).

[7] Liang J, Gao M Y, Liu C S et al. Laser induced in situ formation of titanium composite coatings[J]. Chinese Journal of Lasers, 36, 3272-3276(2009).

[8] Bai H Q, Shang Z, Cai X L et al. Research progress of in situ titanium carbide particulate reinforced titanium composite material[J]. Hot Working Technology, 48, 1-5(2019).

[9] Liu Y B, Liu Y, Tang H P et al. Fabrication and mechanical properties of in situ TiC/Ti metal matrix composites[J]. Journal of Alloys and Compounds, 509, 3592-3601(2011). http://www.sciencedirect.com/science/article/pii/S0925838810030781

[10] Yang Y L, Zhang D, Chen H et al. In situ formation of TiC by laser cladding Ti/C coatings[J]. Applied Laser, 28, 6-8(2008).

[11] Zhang L, Chen X M, Liu W et al. Formation mechanism and sensitivity of cracks in laser-cladded Ni-based-alloy coatings[J]. Laser & Optoelectronics Progress, 56, 111401(2019).

[12] Liu G Z, Zhong W H, Gao Y. Formation and resolving method of the structure defect about laser cladding coatings[J]. Surface Technology, 41, 89-92(2012).

[13] Yao S, Liu H X, Zhang X W et al. Microstructure and properties of laser in situ synthesis Ti/Cr3C2 composite coating[J]. Heat Treatment of Metals, 40, 26-30(2015).

[14] Zhai Y J, Liu X B, Qiao S J et al. Effects of heat treatment on microstructure and tribological properties of self-lubrication anti-wear composite coatings prepared by laser cladding on titanium alloy[J]. Materials Protection, 49, 5-8(2016).

[15] Sun R L, Lei Y W, Niu W. Laser clad Cr3C2-Ni composite coating on titanium alloys[J]. Surface Engineering, 25, 206-210(2009).

[16] Meng X J, Liu X B, Liu H Q et al. Effects of heat treatment on microstructure and performance of NiCr/Cr3C2-WS2 composite coatings[J]. Transactions of Materials and Heat Treatment, 34, 188-193(2013).

[17] Li J N[M]. Technology and application of laser cladding(2016).

[18] Zhang T G, Zhuang H F, Yao B et al. Effect of Y2O3 on microstructure and properties of Ti-based laser cladding layer[J/OL]. Acta Materiae Compositae Sinica, 37, 1390-1400(2020).

[19] Zhang T G, Sun R L, Zhang X Y et al. Microstructure of in situ synthesized Ti based TiC-TiB2 composite coating on surface of Ti811 alloy by laser cladding[J]. Materials Review, 32, 2208-2213(2018).

[20] Zhang T G, Sun R L. Microstructure and properties of nano-Ti3Al laser cladding layer prepared on Ti811 alloy surface[J]. Chinese Journal of Lasers, 45, 0102002(2018).