[1] Y LI, C TAN, M LI. Research progress of laser-cladding Fe-based alloy coating. Surface Technology, 53, 11-27, 66(2024).

[2] Y LU, G SUN, X XIAO et al. Online stress measurement during laser-aided metallic additive manufacturing. Scientific Reports, 9, 7630(2019).

[3] C LI, C LIU, S LI et al. Numerical simulation of thermal evolution and solidification behavior of laser cladding alsitini composite coatings. Coatings, 9, 109940(2019).

[4] J XU, Y DING, Y GAO et al. Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting. Materials & Design, 209, 109940(2021).

[5] P MERCELIS, J KRUTH. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 12, 254-265(2006).

[6] T ROY, A PARADOWSKA, R ABRAHAMS et al. Residual stress in laser cladded heavy-haul rails investigated by neutron diffraction. Journal of Materials Processing Technology, 278, 116511(2020).

[7] H HU, A IQBAL, X WANG et al. Experimental investigation of residual stress relief using pre- and post-clad heating in the laser cladding process. Lasers in Engineering, 31, 11-27(2015).

[8] Y LI, Z PAN, X QI. Effect of heat treatment on temperature and stress distribution during laser cladding of 316L steels. China Mechanical Engineering, 35, 666-677(2024).

[9] R KARUNAKARAN, G KLEIN, M SEALY. Analytical modeling of residual stress formation in hybrid additive manufacturing. Cirp Annals-Manufacturing Technology, 73, 197-200(2024).

[10] Y SUN, X WANG, Y MA et al. Investigation on improved micro-formability and forming mechanism under high strain rate of H62 brass in pulsed current-assisted laser impact micro-forming. Materials Science and Engineering: A, 830, 142301(2022).

[11] S SONG, L WANG, Y HU. Graded coating produced by laser melt injection under steady magnetic field. Chinese Journal of Lasers, 43, 0503005-76(2016).

[12] L LI, G MI, C WANG. A comparison between induction pre-heating and induction post-heating of laser-induction hybrid welding on S690QL steel. Journal of Manufacturing Processes, 43, 276-291(2019).

[13] Z YAO, X YU, Y NIE et al. Effects of three-dimensional vibration on laser cladding of SS316L alloy. Journal of Laser Applications, 31, 032013(2019).

[14] Z YAO, C PAN, Y CHI. Research progress of ultrasonic assisted laser manufacturing technology (Invited). Chinese Journal of Lasers, 51, 49-67(2024).

[15] Z YAO, Z WANG, J CHEN et al. Equiaxed microstructure formation by ultrasonic assisted laser metal deposition. Manufacturing Letters, 31, 56-59(2022).

[16] J CHEN, Z YAO, F WANG et al. Grain refinement and Laves phase dispersion by high-intensity ultrasonic vibration in laser cladding of Inconel 718. Journal of Materials Research and Technology, 30, 8563-8575(2024).

[17] D LI, J ZHANG, L ZHAO. Analysis on temperature and stress of SiC/316L coating by ultrasonic-assisted laser cladding. Transactions of the China Welding Institution, 38, 35-39+130(2017).

[18] B CUI, K CHEN, Y YANG et al. Effect of ultrasonic vibration on the pores and properties of the laser-arc hybrid welding joint of high nitrogen steel. Materials Chemistry and Physics, 318, 129297(2024).

[19] Z YAO, F WANG, Z SUN. Effects of ultrasound on distribution of laser melt injected WC reinforced particles on stainless steel substrate surface. Chinese Journal of Lasers, 50, 1202202-109(2023).

[20] K WANDTKE, A BECKER, D SCHROEPFER et al. Residual stress evolution during slot milling for repair welding and wire arc additive manufacturing of high-strength steel components. Metals, 14, 82(2024).

[21] X MA, N GUO, F YANG et al. Deformation evolution law of surfacing welding on thin bending plates based on the three-dimensional thermal digital image correlation method. Coatings, 12, 1084(2022).

[22] B PAN, Z LU, H XIE. Mean intensity gradient: An effective global parameter for quality. Optics and Lasers in Engineering, 48, 469-477(2010).

[23] Z LI, X HU, P ZHONG. Multi-factor fusion index assessment of digital speckle interferometry images quality under dynamic environment. Optik, 269, 169938(2022).

[24] Y DONG, H WU, X CHEN et al. Multi-factor quality assessment of digital speckle pattern for speckle projection profilometry. Measurement Science and Technology, 35, 105026(2024).

[25] Y ZHOU, Q ZUO, L ZHOU et al. Image feature based quality assessment of speckle patterns for digital image correlation measurement. Measurement, 222, 113590(2023).

[26] Y GAO, Y CHEN, Z YU et al. Correction of thermal airflow distortion in warpage measurements of microelectronic packaging structures via deep learning-based digital image correlation. Microsystems & Nanoengineering, 10, 118(2024).

[27] V PAMARTHI, T SUN, A DAS et al. Strain-based investigation on solidification crack susceptibility of 6005 aluminium using adjustable ring mode (ARM) laser welding. Procedia CIRP, 111, 425-430(2022).

[28] Q ZHENG, H CHEN, J ZHOU et al. Effect of boron element on microstructure and mechanical properties of 316L stainless steel manufactured by selective laser melting. Journal of Materials Research and Technology, 26, 3744-3755(2023).

[29] B JENKINS, A ETIENNE, E BAUSTERT et al. Multiscale characterisation study on the effect of heat treatment on the microstructure of additively manufactured 316L stainless steel. Materials Today Communications, 39, 108849(2024).

[30] F JI, Z HU, X QIN et al. Grain refinement and mechanism of steel in ultrasound assisted wire and arc additive manufacturing. International Communications in Heat and Mass Transfer, 143, 106724(2023).

[31] Z YAO, J CHEN, H QIAN et al. Microstructure and tensile property of laser cladding assisted with multidimensional high-frequency vibration. Materials, 15, 4295(2022).