Optics and Precision Engineering, Volume. 32, Issue 12, 1891(2024)

Optimal design and experimentation of a low-parasitic performance-balanced compliant guide platform

Chengxin ZHENG1... Xiaoqing SUN1,2,*, Zhihong SUN1, Yijie MIAO1 and Xiusong HOU3 |Show fewer author(s)
Author Affiliations
  • 1College of Mechanical Engineering, Donghua University, Shanghai20620, China
  • 2Engineering Research Center of Technical Textiles, Ministry of Education, Donghua University, Shanghai0160, China
  • 3National Innovation Center of Advanced Dyeing & Finishing Technology, Tai'an271000, China
  • show less
    References(18)

    [1] X Q SUN, J WANG, S C YI et al. Design and analysis of a novel piezoelectric inertial actuator with large stepping displacement amplified by compliant mechanism. Microsystem Technologies, 28, 1025-1035(2022).

    [2] Z K LYU, Q S XU. Design and testing of a large-workspace XY compliant manipulator based on triple-stage parallelogram flexure. Mechanism and Machine Theory, 184, 105287(2023).

    [3] Z XU, Z X YANG, K F WANG et al. A bionic inertial piezoelectric actuator with improved frequency bandwidth. Mechanical Systems and Signal Processing, 156, 107620(2021).

    [4] [4] 李佳杰, 陈贵敏. 柔性二级差动式微位移放大机构优化设计[J]. 机械工程学报, 2019, 55(21): 21-28.LIJ J, CHENG M. Optimal design of a compliant two-stage differential displacement amplification mechanism[J]. Journal of Mechanical Engineering, 2019, 55(21): 21-28.(in Chinese)

    [5] J K LIU, Y LENG, W S CHEN et al. Simulation of a piezoelectric micro-jet generator for high viscosity, 859-864(2012).

    [6] [6] 陈云壮, 赖磊捷, 李朋志, 等. 全簧片式空间大行程并联柔性微定位平台及其轨迹控制[J]. 光学 精密工程, 2023, 31(18): 2675-2686. doi: 10.37188/ope.20233118.2675CHENY Z, LAIL J, LIP Z, et al. Full leaf-spring type spatial large-stroke parallel flexure micro-positioning stage and trajectory control[J]. Opt. Precision Eng., 2023, 31(18): 2675-2686.(in Chinese). doi: 10.37188/ope.20233118.2675

    [7] [7] 孙小庆, 忽伟, 刘宇程, 等. 超磁致伸缩定隔一体驱动系统集成设计与仿真[J]. 系统仿真学报, 2021, 33(2): 358-365. doi: 10.16182/j.issn1004731x.joss.19-0329SUNX Q, HUW, LIUY C, et al. Integrated design and simulation of a giant magnetostrictive driving positioning and vibration suppression system[J]. Journal of System Simulation, 2021, 33(2): 358-365.(in Chinese). doi: 10.16182/j.issn1004731x.joss.19-0329

    [8] [8] 吴彤, 杨依领, 吴高华, 等. 二自由度大行程无耦合压电粘滑定位平台[J]. 光学 精密工程, 2024, 32(1): 62-72. doi: 10.37188/ope.20243201.0062WUT, YANGY L, WUG H, et al. Two-DOF piezoelectric stick-slip positioning platform with large strokes and no coupling[J]. Opt. Precision Eng., 2024, 32(1): 62-72.(in Chinese). doi: 10.37188/ope.20243201.0062

    [9] [9] 胡笑奇, 张建辉, 黄毅, 等. 仿尾鳍式变截面摆动振子无阀压电叠堆泵的结构设计[J]. 光学 精密工程, 2011, 19(6): 1334-1343. doi: 10.3788/ope.20111906.1334HUX Q, ZHANGJ H, HUANGY, et al. Structure design of caudal-fin-type piezoelectric-stack pump with variable cross-section oscillating vibrator[J]. Opt. Precision Eng., 2011, 19(6): 1334-1343.(in Chinese). doi: 10.3788/ope.20111906.1334

    [10] [10] 任万飞. 基于NI控制器的单自由度快速刀具伺服装置设计与控制[D]. 长春: 长春工业大学, 2017.RENW F. Design and Control of Single Degree of Freeform Fast Tool Servo Apparatus Based on NI Controller[D]. Changchun: Changchun University of Technology, 2017. (in Chinese)

    [11] [11] 张建国, 李江, 黄凯, 等. 高频高精快刀伺服系统优化[J]. 光学 精密工程, 2022, 30(1): 78-88. doi: 10.37188/OPE.20223001.0078ZHANGJ G, LIJ, HUANGK, et al. Optimal design of high frequency and high precision fast tool servo system[J]. Opt. Precision Eng., 2022, 30(1): 78-88.(in Chinese). doi: 10.37188/OPE.20223001.0078

    [12] [12] 桂堂军. 两自由度快速刀具伺服装置的服役性能研究[D]. 长春: 吉林大学, 2017.GUIT J. Research on the Service Performance of 2-DOF Fast Tool Servo Mechanism[D]. Changchun: Jilin University, 2017. (in Chinese)

    [13] V K NGUYEN, H T PHAM, H H PHAM et al. Optimization design of a compliant linear guide for high-precision feed drive mechanisms. Mechanism and Machine Theory, 165, 104442(2021).

    [14] H LIANG, H TANG, L X HUANG et al. A large-stroke flexure fast tool servo with new displacement amplifier, 52-57(2017).

    [15] [15] 闫鹏, 李金银. 压电陶瓷驱动的长行程快刀伺服机构设计[J]. 光学 精密工程, 2020, 28(2): 390-397.YANP, LIJ Y. Design of piezo-actuated long-stroke fast tool servo mechanism[J]. Opt. Precision Eng., 2020, 28(2): 390-397.(in Chinese)

    [16] [16] 李金银. 一类压电陶瓷驱动的长行程快刀伺服系统设计与分析[D]. 济南: 山东大学, 2020. doi: 10.22209/ic.v61n1a02LIJ Y. Design and Analysis of a Piezo-actuated Long Stroke Fast Tool Servo System[D]. Jinan: Shandong University, 2020. (in Chinese). doi: 10.22209/ic.v61n1a02

    [17] Z W ZHU, H H DU, R J ZHOU et al. Design and trajectory tracking of a nanometric ultra-fast tool servo. IEEE Transactions on Industrial Electronics, 67, 432-441(2020).

    [18] R J ZHOU, Z H ZHU, L B KONG et al. Development of a high-performance force sensing fast tool servo. IEEE Transactions on Industrial Informatics, 18, 35-45(2022).

    Tools

    Get Citation

    Copy Citation Text

    Chengxin ZHENG, Xiaoqing SUN, Zhihong SUN, Yijie MIAO, Xiusong HOU. Optimal design and experimentation of a low-parasitic performance-balanced compliant guide platform[J]. Optics and Precision Engineering, 2024, 32(12): 1891

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Mar. 7, 2024

    Accepted: --

    Published Online: Aug. 28, 2024

    The Author Email: SUN Xiaoqing (sunxq@dhu.edu.cn)

    DOI:10.37188/OPE.20243212.1891

    Topics