Optics and Precision Engineering, Volume. 31, Issue 20, 2930(2023)

Comparison of deviation in aircraft casing deformation measurement based on data mapping optimization

Hui LIU1...2, Jin LIANG1,*, Meitu YE1,2, Jianying GUO1,3 and Leigang LI2 |Show fewer author(s)
Author Affiliations
  • 1State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an70049, China
  • 2Innovation Lab, XTOP 3D Technology (Shenzhen) Co. Ltd., Shenzhen518060, China
  • 3Laboratory for Strength and Transmission,Aero Engine Corporation of China Sichuan Gas Turbine Research Institute,Mianyang621000,China
  • show less
    References(20)

    [1] [1] 郭建英, 梁晋, 叶美图, 等. 反射镜面辅助的航空机匣三维变形多视角测量[J]. 光学 精密工程, 2022, 30(24): 3105-3115. doi: 10.37188/ope.20223024.3105GUOJ Y, LIANGJ, YEM T, et al. Mirror-assisted multi-view measurement of 3D deformation for aero-engine casing[J]. Opt. Precision Eng., 2022, 30(24): 3105-3115. (in Chinese). doi: 10.37188/ope.20223024.3105

    [2] [2] 叶美图, 梁晋, 李磊刚, 等. 斜视场弱相关散斑图像的离散化匹配[J]. 光学 精密工程, 2021, 29(9): 2235-2246. doi: 10.37188/OPE.20212909.2235YEM T, LIANGJ, LIL G, et al. Discretization matching of weakly-correlated speckle images in oblique field of view[J]. Opt. Precision Eng., 2021, 29(9): 2235-2246.(in Chinese). doi: 10.37188/OPE.20212909.2235

    [3] P F LUO, Y J CHAO, M A SUTTON et al. Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision. Experimental Mechanics, 33, 123-132(1993).

    [4] H SCHREIER, J J ORTEU, M A SUTTON. Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications(2009).

    [5] N W GARDNER, M W HILBURGER, W T HAYNIE et al. Digital image correlation data processing and analysis techniques to enhance test data assessment and improve structural simulations, 1698(2018).

    [6] M G MOHAMMAD, A MARIANO CRYSTAL, S SAMANEH et al. Developing a lung model in the age of COVID-19: a digital image correlation and inverse finite element analysis framework. Frontiers in Bioengineering and Biotechnology, 9, 684778(2021).

    [7] O A TAYLOR, V TIPPUR HAREESH. Measurement of mixed-mode fracture characteristics of an epoxy-based adhesive using a hybrid digital image correlation (DIC) and finite elements (FE) approach. Optics and Lasers in Engineering, 140, 106544(2021).

    [8] X H LI, M GHASRI-KHOUZANI, A BOGNO et al. Investigation of compressive and tensile behavior of stainless steel/dissolvable aluminum bimetallic composites by finite element modeling and digital image correlation. Materials, 14, 3654(2021).

    [9] C SEBASTIAN, E HACK, E PATTERSON. An approach to the validation of computational solid mechanics models for strain analysis. The Journal of Strain Analysis for Engineering Design, 48, 36-47(2013).

    [10] W WANG, JE MOTTERSHEAD, CM SEBASTIAN et al. Shape features and finite element model updating from full-field strain data. International Journal of Solids and Structures, 48, 1644-1657(2011).

    [11] W WANG, JE MOTTERSHEAD, C MARES. Mode-shape recognition and finite element model updating using the Zernike moment descriptor. Mechanical Systems and Signal Processing, 23, 2088-2112(2009).

    [12] M SALLOUM, K L JOHNSON, J E BISHOP et al. Adaptive wavelet compression of large additive manufacturing experimental and simulation datasets. Computational Mechanics, 63, 491-510(2019).

    [13] P LAVA, E M C JONES, L WITTEVRONGEL et al. Validation of finite-element models using full-field experimental data: levelling finite-element analysis data through a digital image correlation engine. Strain, 56(2020).

    [14] P J BESL, N D MCKAY. A method for registration of 3-D shapes. IEEE Transactions on Pattern Analysis and Machine Intelligence, 14, 239-256(1992).

    [15] K S ARUN, T S HUANG, S D BLOSTEIN. Least-squares fitting of two 3-D point sets. IEEE Transactions on Pattern Analysis and Machine Intelligence, 698-700(1987).

    [16] D WHITLEY, T STARKWEATHER, C BOGART. Genetic algorithms and neural networks: optimizing connections and connectivity. Parallel Computing, 14, 347-361(1990).

    [17] S F DING, C Y SU, J Z YU. An optimizing BP neural network algorithm based on genetic algorithm. Artificial Intelligence Review, 36, 153-162(2011).

    [18] F YIN, H MAO, L HUA. A hybrid of back propagation neural network and genetic algorithm for optimization of injection molding process parameters. Materials & Design, 32, 3457-3464(2011).

    [19] B PAN, A ASUNDI, H XIE et al. Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements. Optics and Lasers in Engineering, 47, 865-874(2009).

    [20] I AMIDROR. Scattered data interpolation methods for electronic imaging systems: a survey. Journal of Electronic Imaging, 11, 157-176(2002).

    CLP Journals

    [1] Yindi CAI, Zimeng SUN, Shixiong LI, Chao NIU, Taikun GE, Xinwei GAO. Automatic measurement of folding wing geometry size based on improved Canny-FAST[J]. Optics and Precision Engineering, 2025, 33(3): 466

    [2] Yindi CAI, Zimeng SUN, Shixiong LI, Chao NIU, Taikun GE, Xinwei GAO. Automatic measurement of folding wing geometry size based on improved Canny-FAST[J]. Optics and Precision Engineering, 2025, 33(3): 466

    Tools

    Get Citation

    Copy Citation Text

    Hui LIU, Jin LIANG, Meitu YE, Jianying GUO, Leigang LI. Comparison of deviation in aircraft casing deformation measurement based on data mapping optimization[J]. Optics and Precision Engineering, 2023, 31(20): 2930

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Modern Applied Optics

    Received: Mar. 16, 2023

    Accepted: --

    Published Online: Nov. 28, 2023

    The Author Email: LIANG Jin (liangjin@mail.xjtu.edu.cn)

    DOI:10.37188/OPE.20233120.2930

    Topics