[1] WANG W D, YAO D X, CHEN H B et al. ZrSi₂-MgO as novel additives for high thermal conductivity of β-Si₃N₄ ceramics[J]. J. Am. Ceram. Soc, 2090-2100(2020).

[2] WANG W, YAO D, LIANG H et al. Effect of in-situ formed Y₂O₃ by metal hydride reduction reaction on thermal conductivity of β-Si₃N₄ ceramics[J]. J. Eur. Ceram. Soc, 5316-5323(2020).

[3] WANG W, YAO D, LIANG H et al. Effect of the binary nonoxide additives on the densification behavior and thermal conductivity of Si₃N₄ ceramics[J]. J. Am. Ceram. Soc, 5891-5899(2020).

[4] WANG W, YAO D, LIANG H et al. Novel silicothermic reduction method to obtain Si₃N₄ ceramics with enhanced thermal conductivity and fracture toughness[J]. J. Eur. Ceram. Soc, 1735-1738(2021).

[5] BECHER P F, PAINTER G S, SHIBATA N et al. Effects of rare- earth (RE) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE₂O₃ + MgO additives: RE=La, Gd, and Lu[J]. J. Am. Ceram. Soc, 2328-2336(2008).

[6] TATARKO P, KAŠIAROVA M, DUSZA J et al. Influence of rare- earth oxide additives on the oxidation resistance of Si₃N₄-SiC nanocomposites[J]. J. Eur. Ceram. Soc, 2259-2268(2013).

[7] ROUXEL T, SANGLEBOEUF J C, HUGER M et al. Temperature dependence of Young's modulus in Si₃N₄-based ceramics: roles of sintering additives and of SiC-particle content[J]. Acta Mater, 1669-1682(2002).

[8] LI X Q, YAO D X, ZUO K H et al. Fabrication, microstructural characterization and gas permeability behavior of porous silicon nitride ceramics with controllable pore structures[J]. J. Eur. Ceram. Soc, 2855-2861(2019).

[9] LI X Q, YAO D X, ZUO K H et al. Microstructure and gas permeation performance of porous silicon nitride ceramics with unidirectionally aligned channels[J]. J. Am. Ceram. Soc, 6565-6574(2020).

[10] XIA Y F, ZENG Y P, JIANG D L. Mechanical and dielectric properties of porous Si₃N₄ ceramics using PMMA as pore former[J]. Ceram. Int, 3775-3779(2011).

[11] PRADEILLES N, RECORD M C, GRANIER D et al. Synthesis of β-SiAlON: a combined method using Sol-Gel and SHS processes[J]. Ceram. Int, 1189-1194(2008).

[12] JENNINGS H M, RICHMAN M H. Structure, formation mechanisms and kinetics of reaction-bonded silicon-nitride[J]. J. Mater. Sci, 2087-2098(1976).

[13] ZIEGLER G, HEINRICH J, WOTTING G. Relationships between processing, microstructure and properties of dense and reaction- bonded silicon-nitride[J]. J. Mater. Sci, 3041-3086(1987).

[14] MATSUNAGA C, ZHOU Y, KUSANO D et al. Nitridation behavior of silicon powder compacts of various thicknesses with Y₂O₃ and MgO as sintering additives[J]. Int. J. Appl. Ceram, 1157-1163(2017).

[15] SHAN S Y, YANG J F, GAO J Q et al. Porous silicon nitride ceramics prepared by reduction-nitridation of silica[J]. J. Am. Ceram. Soc, 2594-2596(2005).

[16] YANG J F, SHAN S Y, JANSSEN R et al. Synthesis of fibrous β-Si₃N₄ structured porous ceramics using carbothermal nitridation of silica[J]. Acta Mater, 2981-2990(2005).

[17] ZHI Q, WANG B, ZHAO S et al. Synthesis and mechanical properties of highly porous ultrafine-grain Si₃N₄ ceramics via carbothermal reduction-nitridation combined with liquid phase sintering[J]. Ceram. Int, 21359-21364(2019).

[18] MUNIR Z A, HOLT J B. The combustion synthesis of refractory nitrides[J]. J. Mater. Sci, 710-714(1987).

[19] ZAKI Z, MOSTAFA N, AHMED Y et al. Processing of high- density magnesia spinel electro-conducting ceramic composite and its oxidation at 1400 ℃[J]. Int. J. Appl. Ceram, 662-669(2016).

[20] ADACHI S, WADA T, MIHARA T et al. High-pressure self- combustion sintering of alumina titanium carbide ceramic composite[J]. J. Am. Ceram. Soc, 1451-1452(1990).

[21] BHAUMIK S K, DIVAKAR C, SINGH A K et al. Synthesis and sintering of TiB₂ and TiB₂-TiC composite under high pressure[J]. Mater. Sci. Eng., A, 275-281(2000).

[22] BHAUMIK S K, DIVAKAR C, DEVI S U et al. Synthesis and sintering of SiC under high pressure and high temperature[J]. J. Mater. Res, 906-911(1999).

[24] CINCOTTI A, LICHERI R, LOCCI A M et al. A review on combustion synthesis of novel materials: recent experimental and modeling results[J]. J. Chem. Technol. Biotechnol, 122-127(2003).

[25] TIAN Z B, ZHANG J, SUN S Y et al. Combustion synthesis of α-Si₃N₄ with the addition of NH₄Cl[J]. Ceram. Int, 20591-20594(2018).

[26] GE Y Y, SUN S Y, WANG Q et al. Effect of Fe-contained species on the preparation of α-Si₃N₄ fibers in combustion synthesis[J]. J. Am. Ceram. Soc, 1464-1471(2016).

[27] WU X M, LIU G H, LI J Q et al. Combustion synthesis of ZrN and AlN using Si₃N₄ and BN as solid nitrogen sources[J]. Ceram. Int, 11914-11917(2018).

[28] HIRANAKA A, YI X, SAITO G et al. Effects of Al particle size and nitrogen pressure on AlN combustion synthesis[J]. Ceram. Int, 9872-9876(2017).

[29] SHAHIEN M, RADWAN M, KIRIHARA S et al. Combustion synthesis of single-phase β-SiAlONs (z=2-4)[J]. J. Eur. Ceram. Soc, 1925-1930(2010).

[30] WANG Q, GE Y Y, CHEN Y et al. SHS of Eu²⁺-doped β-SiAlON phosphors: impacts of N₂ pressure and Si particle size[J]. Ceram. Int, 4456-4461(2017).

[31] XU J K, HU Z L, HAN Y et al. Combustion synthesis of MgSiN₂ powders and Si₃N₄-MgSiN₂ composite powders: effects of processing parameters[J]. J. Am. Ceram. Soc, 122-135(2020).

[32] CUI W, ZHU Y, GE Y Y et al. Effects of nitrogen pressure and diluent content on the morphology of gel-cast-foam-assisted combustion synthesis of elongated β-Si₃N₄ particles[J]. Ceram. Int, 12553-12560(2014).

[33] CANO I G, BOROVINSKAYA I P, RODRIGUEZ M A et al. Effect of dilution and porosity on self-propagating high-temperature synthesis of silicon nitride[J]. J. Am. Ceram. Soc, 2209-2211(2002).

[34] YANG J H, HAN L S, CHEN Y X et al. Effects of pelletization of reactants and diluents on the combustion synthesis of Si₃N₄ powder[J]. J. Alloys Compd, 81-84(2012).

[35] WON H I, WON C W, NERSISYAN H H et al. Salt-assisted combustion synthesis of silicon nitride with high α-phase content[J]. J. Alloys Compd, 656-659(2010).

[36] CHEN Y X, LI J T, DU J S. Cost effective combustion synthesis of silicon nitride[J]. Mater. Res. Bull, 1598-1606(2008).

[37] CANO I G, BAELO S P, RODRIGUEZ M A et al. Self-propagating high temperature-synthesis of Si₃N₄: role of ammonium salt addition[J]. J. Eur. Ceram. Soc, 291-295(2001).

[38] CHEN D Y, ZHANG B L, ZHUANG H R et al. Synthesis of β-Si₃N₄ whiskers by SHS[J]. Mater. Res. Bull, 1481-1485(2002).

[39] PENG G H, JIANG G J, ZHUANG H R et al. Fabrication of β-Si₃N₄ whiskers by combustion synthesis with MgSiN₂ as additives[J]. Mater. Res. Bull, 2139-2143(2005).

[40] GERMAN R, SURI P, PARK S. Review: liquid phase sintering[J]. J. Mater. Sci, 1-39(2009).

[41] KRSTIC Z, KRSTIC V D. Silicon nitride: the engineering material of the future[J]. J. Mater. Sci, 535-552(2011).

[42] ZIEGLER A, IDROBO J C, CINIBULK M K et al. Interface structure and atomic bonding characteristics in silicon nitride ceramics[J]. Science, 1768-1770(2004).

[43] SHIBATA N, PENNYCOOK S J, GOSNELL T R et al. Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions[J]. Nature, 730-733(2004).

[44] CHEN D, ZHANG B, ZHUANG H et al. Combustion synthesis of network silicon nitride porous ceramics[J]. Ceram. Int, 363-364(2003).

[45] LI W K, CHEN D Y, ZHANG B L et al. Effect of rare-earth oxide additives on the morphology of combustion synthesized rod-like β-Si₃N₄crystals[J]. Mater. Lett, 2322-2325(2004).

[46] ZHANG Y, YAO D, ZUO K et al. Effects of N₂ pressure and Si particle size on mechanical properties of porous Si₃N₄ ceramics prepared via SHS[J]. J. Eur. Ceram. Soc, 4454-4461(2020).

[47] ZHANG Y, YAO D, ZUO K et al. Fabrication and mechanical properties of porous Si₃N₄ ceramics prepared via SHS[J]. Ceram. Int, 14867-14872(2019).

[48] WANG L, HE G, YANG Z et al. Combustion synthesis of high flexural strength, low linear shrinkage and machinable porous β-Si₃N₄ ceramics[J]. J. Eur. Ceram. Soc, 2395-2399(2020).

[49] CAO Y G, EG C C, ZHOU Z J et al. Combustion synthesis of α-Si₃N₄ whiskers[J]. J. Mater. Res, 876-880(1999).

[50] WAKIHARA T, YABUKI H, TATAMI J et al. In situ measurement of shrinkage during postreaction sintering of reaction-bonded silicon nitride[J]. J. Am. Ceram. Soc, 3413-3415(2008).

[51] WANG C, QIAO R Q, CHEN L J. Fabrication and erosion resistance of dense α-Si₃N₄/SiAlON coating on porous Si₃N₄ ceramic[J]. RSC Adv, 63801-63808(2016).

[52] LEE J S, MUN J H, HAN B D et al. Effect of raw-Si particle size on the properties of sintered reaction-bonded silicon nitride[J]. Ceram. Int, 965-976(2004).

[53] KRAMER M, HOFFMANN M J, PETZOW G. Grain-growth studies of silicon-nitride dispersed in an oxynitride glass[J]. J. Am. Ceram. Soc, 2778-2784(1993).

[54] CHEN S L, WANG L, HE G et al. Microstructure and properties of porous Si₃N₄ ceramics by gelcasting-self-propagating high- temperature synthesis (SHS)[J]. J. Adv. Ceram, 172-183(2021).

[55] ZHANG Y, YAO D, ZUO K et al. A novel route for the fabrication of porous Si₃N₄ ceramics with unidirectionally aligned channels[J]. Mater. Lett, 128246(2020).

[56] ZHANG Y, YAO D, ZUO K et al. Effects of different types of sintering additives and post-heat treatment (PHT) on the mechanical properties of SHS-fabricated Si₃N₄ ceramics[J]. Ceram. Int, 22461-22467(2021).

[57] GRIFFITH A A. The phenomena of rupture and flow in solids[J]. Philos. Trans. Royal Soc, 163-198(1920).

[58] DING H, HU Y, LI X et al. Microstructure, mechanical properties and sintering mechanism of pressureless-sintered porous Si₃N₄ ceramics with YbF₃-MgF₂ composite sintering aids[J]. Ceram. Int, 2558-2564(2020).

[59] ZHANG Y, YAO D, ZUO K et al. Self-propagating high temperature synthesis (SHS) of porous Si₃N₄-based ceramics with considerable dimensions and study on mechanical properties and oxidation behavior[J]. J. Eur. Ceram. Soc, 4452-4461(2021).

[60] HU Y, ZUO K, XIA Y et al. Microstructure and permeability of porous Si₃N₄ supports prepared via SHS[J]. Ceram. Int, 1571-1577(2021).

[61] KAWAI C. Effect of grain size distribution on the strength of porous Si₃N₄ ceramics composed of elongated β-Si₃N₄ grains[J]. J. Mater. Sci, 5713-5717(2001).

[62] ZHANG Y, YU X, GU H et al. Microstructure evolution and high-temperature mechanical properties of porous Si₃N₄ ceramics prepared by SHS with a small amount of Y₂O₃ addition[J]. Ceram. Int, 5656-5662(2021).

[63] YU F L, WANG H R, YANG J F et al. Effects of organic additives on microstructure and mechanical properties of porous Si₃N₄ ceramics[J]. Bull. Mater. Sci, 285-291(2010).

[64] KALEMTAS A, TOPATES G, OZCOBAN H et al. Mechanical characterization of highly porous β-Si₃N₄ ceramics fabricated via partial sintering & starch addition[J]. J. Eur. Ceram. Soc, 1507-1515(2013).

[65] KAWAI C, YAMAKAWA A. Effect of porosity and microstructure on the strength of Si₃N₄: designed microstructure for high strength, high thermal shock resistance, and facile machining[J]. J. Am. Ceram. Soc, 2705-2708(1997).

[66] YANG J F, DENG Z Y, OHJI T. Fabrication and characterisation of porous silicon nitride ceramics using Yb₂O₃ as sintering additive[J]. J. Eur. Ceram. Soc, 371-378(2003).

[67] YIN X W, LI X M, ZHANG L T et al. Microstructure and mechanical properties of Lu₂O₃-doped porous silicon nitride ceramics using phenolic resin as pore-forming agent[J]. Int. J. Appl. Ceram, 391-399(2010).

[68] LI X M, YIN X W, ZHANG L T et al. Microstructure and properties of porous Si₃N₄ ceramics with a dense surface[J]. Int. J. Appl. Ceram, 627-636(2011).

[69] YUE J S, DONG B C, WANG H J. Porous Si₃N₄ fabricated by phase separation method using benzoic acid as pore-forming agent[J]. J. Am. Ceram. Soc, 1989-1991(2011).

[70] DING H H, ZHAO Z H, QI T et al. High α-β phase transition and properties of YbF₃-added porous Si₃N₄ ceramics obtained by low temperature pressureless sintering[J]. Int. J. Refract. Hard. Met, 131-137(2019).

[71] JIANG G P, YANG J F, GAO J Q et al. Porous silicon nitride ceramics prepared by extrusion using starch as binder[J]. J. Am. Ceram. Soc, 3510-3516(2008).

[72] LIU X H, HUANG Z Y, GE Q M et al. Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO-Al₂O₃-SiO₂ as sintering additive[J]. J. Eur. Ceram. Soc, 3353-3359(2005).

[73] YANG J, YANG J F, SHAN S Y et al. Effect of sintering additives on microstructure and mechanical properties of porous silicon nitride ceramics[J]. J. Am. Ceram. Soc, 3843-3845(2006).

[74] FAN L, ZHOU M, WANG H J et al. Low-temperature preparation of β-Si₃N₄ porous ceramics with a small amount of Li₂O-Y₂O₃[J]. J. Am. Ceram. Soc, 1371-1374(2014).

[75] YAO D, CHEN H, ZUO K H et al. High temperature mechanical properties of porous Si₃N₄ prepared via SRBSN[J]. Ceram. Int, 11966-11971(2018).

[76] YAO D X, XIA Y F, ZENG Y P et al. Porous Si₃N₄ ceramics prepared via slip casting of Si and reaction bonded silicon nitride[J]. Ceram. Int, 3071-3076(2011).

[77] YAO D X, XIA Y F, ZUO K H et al. The effect of fabrication parameters on the mechanical properties of sintered reaction bonded porous Si₃N₄ ceramics[J]. J. Eur. Ceram. Soc, 3461-3467(2014).

[78] YAO D X, ZENG Y P. High flexural strength porous silicon nitride prepared via nitridation of silicon powder[J]. J. Inorg. Mater, 422-426(2011).

[79] YAO D X, ZENG Y P, ZUO K H et al. The effects of BN addition on the mechanical properties of porous Si₃N₄/BN ceramics prepared via nitridation of silicon powder[J]. J. Am. Ceram. Soc, 666-670(2011).

[80] YAO D X, ZENG Y P, ZUO K H et al. Porous Si₃N₄ ceramics prepared via nitridation of Si powder with Si₃N₄ Filler and postsintering[J]. Int. J. Appl. Ceram, 239-245(2012).

[81] HU H L, YAO D X, XIA Y F et al. Porous Si₃N₄/SiC ceramics prepared via nitridation of Si powder with SiC addition[J]. Int. J. Appl. Ceram, 845-850(2014).

[82] HU H L, ZENG Y P, ZUO K H et al. Synthesis of porous Si₃N₄/SiC ceramics with rapid nitridation of silicon[J]. J. Eur. Ceram. Soc, 3781-3787(2015).

[83] HU H L, ZENG Y P, XIA Y F et al. Rapid fabrication of porous Si₃N₄/SiC ceramics via nitridation of silicon powder with ZrO₂ as catalyst[J]. Ceram. Int, 7579-7582(2014).

[84] LU Y, YANG J F, LU W Z et al. Porous silicon nitride ceramics fabricated by carbothermal reduction-reaction bonding[J]. Mater. Manuf. Processes, 855-861(2011).

[85] SHAN S Y, JIA Q M, JIANG L H et al. Microstructure control and mechanical properties of porous silicon nitride ceramics[J]. Ceram. Int, 3371-3374(2009).

[86] SHAN S Y, YANG J F, GAO J Q et al. Fabrication of porous silicon nitride with high porosity[J]. Key Eng. Mater, 1105-1108(2007).

[87] LU H H, HUANG J L. Effect of Y₂O₃ and Yb₂O₃ on the microstructure and mechanical properties of silicon nitride[J]. Ceram. Int, 621-628(2001).

[88] KLEMM H, PEZZOTTI G. Fracture toughness and time-dependent strength behavior of low-doped silicon nitrides for applications at 1400 ℃[J]. J. Am. Ceram. Soc, 553-561(1994).

[89] LANGE F F. High-temperature strength behavior of hot-pressed Si₃N₄: evidence for subcritical crack growth[J]. J. Am. Ceram. Soc, 84-87(1974).

[90] RILEY F L. Silicon nitride and related materials[J]. J. Am. Ceram. Soc, 245-265(2000).