[1] [1] DING Y C, LIU H Z, LU B H, et al.. Next Generation Lithography—Imprint Lithography ［J］.Chinese Journal of Mechanical Engineering,2007,43(3):1-6．(in Chinese)

[2] [2] QING X G, LI D C, LI H S, et al.. Study on the Mold Fabrication Process for Imprint Lithography ［J］.Electronic Process Technology, 2003,24(5):207-209．(in Chinese)

[3] [3] WEN W L, ZUO C C, YU J Q, et al.. Hot embossing process analysis of microchannels for polymer microfluidic chips ［J］.Journal of Jilin University(Engineering and technology Edition ) ,2006,36(5)：696-700． (in Chinese)

[4] [4] HIRAI Y, ONISHI Y, TANABE T, et al.. Pressure and resist thickness dependency of resist time evolutions profiles in nanoimprint lithography［J］.Microelectronic Engineering,2008,85:842-845.

[5] [5] NIKLAOS KEHAGIAS, VINCENT REBOUD, et al.. Residual layer thickness in nanoimprint:Experiments and coarse-grain simulation［J］. Microelectronic Engineering,2008,85:846-849.

[6] [6] ROWLAND H D,SUN A C,SCHUNK P R,et al.．Impact of resist film thickness and cavity size on resist flow during embossing:toward process design rules for nanoimprint lithography［J］．USA ：Journal of Micromechanics and Microengineering,2005,15：2414-2425．

[7] [7] KANG T G,KWON T H. Numerical investgation of Hot Embossing Filling Characteristics［J］.Resist Processing,2007:266-275.

[8] [8] FENG H,ANSHU G,SUN Y G, et al..Processing Dependent Vehavior of Soft Imprint Lithography on the 1-10 nm Scale［J］.IEEE Transactions on Nanotechnology,2006，3(5):301-307.

[9] [9] LI H S. The research on the resist, mold and pattern transfer in micro-imprint［D］,Xi’an: Xi’an Jiaotong University.2005.(in chinese)

[10] [10] HE Y, FU J Z, CHEN Z C. Study on polymer flow profile in micro hot embossing ［J］. Opt. Precision Eng,.2008,16(2):270-277.(in Chinese)