[1] Liu J, Li J D, Lü L et al. Evaluation on application of corrosion protection downhole tool in oil-wells[J]. Surface Technology, 45, 92-97(2016).

[2] [2] ZhiZ, Zhou XY, Zeng DZ, et al. Evaluation on chloride cracking of S135 high-strength drill pipe[J]. Advanced Materials Research, 2012, 430/431/432: 636- 639.

[3] Zhou Y Z. Corrosion and protection of steel G105 for drill tools in saline slurries[J]. Corrosion Science and Protection Technology, 20, 424-428(2008).

[4] Cui X Y, Wang C B, Kang J J et al. Influence of the corrosion of saturated saltwater drilling fluid on the tribological behavior of HVOF WC-10Co4Cr coatings[J]. Engineering Failure Analysis, 71, 195-203(2017). http://www.sciencedirect.com/science/article/pii/S1350630716307944

[5] González J M, Quintero F, Arellano J E et al. Effects of interactions between solids and surfactants on the tribological properties of water-based drilling fluids[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 391, 216-223(2011).

[6] Chen J, Liu Y L. The engineering application of laser remanufacturing technology[J]. China Surface Engineering, 19, 50-55(2006).

[7] Deng Z Q, Shi S H, Zhou B et al. Laser cladding forming of unequal-height curved arc-shaped thin-wall structures[J]. Chinese Journal of Lasers, 44, 0902005(2017).

[8] Zhai J H, Liu Z J, Zhang Y et al. Laser cladding reparation of inner cylinder piston rods[J]. Laser & Optoelectronics Progress, 54, 111411(2017).

[9] Xu G J, Li C G, Guo Y Q et al. Organization of clad layer using mixed powder of Stellite 6 and VC[J]. Transactions of the China Welding Institution, 38, 73-78, 132(2017).

[10] Cheng W, Wu M P, Tang Y H et al. Laser cladding process of 42CrMo surface with single-pass[J]. Laser & Optoelectronics Progress, 56, 041402(2019).

[11] Zhong X K, Wang X F, Han F S. Electrochemical corrosion behavior of stellite-F laser cladding layer on surface of 316L stainless steel[J]. Heat Treatment of Metals, 44, 176-179(2019).

[12] Benea L, Mitoseriu O, Galland J et al. Corrosion study of copper composite coating by impedance spectroscopy method[J]. Materials and Corrosion, 51, 491-495(2000). http://onlinelibrary.wiley.com/doi/10.1002/1521-4176(200007)51:7<491::AID-MACO491>3.0.CO;2-C/citedby

[13] Hall D S, Standish T E, Behazin M et al. Corrosion of copper-coated used nuclear fuel containers due to oxygen trapped in a Canadian deep geological repository[J]. Corrosion Engineering, Science and Technology, 53, 309-315(2018).

[14] Hocking W H, Lister D H. Corrosion of stellite-6 in lithiated and borated high-temperature water[J]. Surface and Interface Analysis, 11, 45-59(1988).

[15] Xue M P, Han B, Wang Y et al. Microstructures and corrosion resistance properties of Ni-based WC/Cr3C2 coating prepared by laser cladding[J]. Laser & Optoelectronics Progress, 48, 091403(2011).

[16] Xu L N, Zhu J Y, Wang B. Influence of Cr content and pH value on the semi-passivation behavior of low Cr pipeline steels[J]. Acta Metallurgica Sinica, 53, 677-683(2017).

[17] Feng X T, Gu H, Zhou S F et al. Microstructure and electrochemical corrosion behavior of TC4 titanium alloy cladding layer prepared with powder feeding laser additive manufacturing[J]. Chinese Journal of Lasers, 46, 0302003(2019).

[18] Ren C, Li Z G, Shu D et al. Microstructure and water erosion resistance property of Stellite 6 coating by laser cladding on 17-4 PH stainless steel surface[J]. Chinese Journal of Lasers, 44, 0402010(2017).

[19] He X, Kong D J, Song R G. Effect of scanning speed on microstructures and properties of laser cladding Al-Ni-TiC-CeO2 composite coatings[J]. Surface Technology, 48, 155-162(2019).