[1] [1] 1于连栋， 赵会宁. 关节类坐标测量机关键技术及进展［J］. 仪器仪表学报， 2017， 38（8）： 1879-1888. doi: 10.3969/j.issn.0254-3087.2017.08.006YUL D， ZHAOH N. Key technologies and advances of articulated coordinate measuring machines［J］. Chinese Journal of Scientific Instrument， 2017， 38（8）： 1879-1888. （in Chinese）. doi: 10.3969/j.issn.0254-3087.2017.08.006

[2] LI Y B, LI T J, ZHU H F et al. Comparative analysis of the kinematics solution based on the DH method and screw theory[J]. Mathematical Problems in Engineering, 2021, 1-13(2021).

[3] HAYATI S A. Robot arm geometric link parameter estimation[C], 1477-1483(1983).

[4] VEITSCHEGGER W K, WU C H. Robot calibration and compensation[J]. IEEE Journal on Robotics and Automation, 4, 643-656(1988).

[5] ZHUANG H, ROTH Z S. A linear solution to the kinematic parameter identification of robot manipulators[J]. IEEE Transactions on Robotics and Automation, 9, 174-185(1993).

[6] HE R B, LI X W, SHI T L et al. A kinematic calibration method based on the product of exponentials formula for serial robot using position measurements[J]. Robotica, 33, 1295-1313(2015).

[7] LIU H, ZHU W D, DONG H Y et al. An improved kinematic model for serial robot calibration based on local POE formula using position measurement[J]. Industrial Robot： an International Journal, 45, 573-584(2018).

[8] ZHAO H N, YU L D, JIA H K et al. A new kinematic model of portable articulated coordinate measuring machine[J]. Applied Sciences, 6, 181(2016).

[9] JIANG Y Z, YU L D, JIA H K et al. Absolute positioning accuracy improvement in an industrial robot[J]. Sensors, 20, 4354(2020).

[10] FENG X G, ZHU J Q, ZHANG J Y. The length error compensation method of articulated arm coordinate measuring machine[J]. Review of Scientific Instruments, 90, 105106(2019).

[11] [11] 11GJB1801-93，方法101 倾角回转误差试验：惯性技术测试设备主要性能试验方法［S］.国防科学技术工业委员会，1993. doi: 10.15385/yb.miracle.1993GJB1801-93， Method 101 Tilt angle rotation error test：Testing methods of major performance for test equipments of inertial technology［S］. National Defense Science， technology and Industry Commission， 1993. （in Chinese）. doi: 10.15385/yb.miracle.1993

[12] [12] 12霍炎， 任顺清. 轴系倾角回转误差中一次谐振的分离方法［J］. 哈尔滨工业大学学报， 2017， 49（10）： 83-89. doi: 10.11918/j.issn.0367-6234.201605118HUOY， RENSH Q. Error separation technology of the first harmonic resonance from the angular rotation errors［J］. Journal of Harbin Institute of Technology， 2017， 49（10）： 83-89. （in Chinese）. doi: 10.11918/j.issn.0367-6234.201605118

[13] BAO C C, LI J K, FENG Q B et al. Error-compensation model for simultaneous measurement of five degrees of freedom motion errors of a rotary axis[J]. Measurement Science and Technology, 29(2018).

[14] BRIDGES R E, SULLIVAN R et al. Apparatus and method to compensate bearing runout in an articulated arm coordinate measurement machine[P].

[15] RAKSIRI C, PA-IM K, RODKWAN S. An analysis of joint assembly geometric errors affecting end-effector for six-axis robots[J]. Robotics, 9, 27(2020).

[16] [16] 16张滋黎， 朱涵， 周维虎. 激光跟踪仪转镜倾斜误差的标定及修正［J］. 光学 精密工程， 2015， 23（5）： 1205-1212. doi: 10.3788/OPE.20152305.1205ZHANGZ L， ZHUH， ZHOUW H. Error calibration and correction of mirror tilt in laser trackers［J］. Opt. Precision Eng.， 2015， 23（5）： 1205-1212. （in Chinese）. doi: 10.3788/OPE.20152305.1205

[17] JIA H K, YU L D, ZHAO H N et al. A new method of angle measurement error analysis of rotary encoders[J]. Applied Sciences, 9, 3415(2019).

[18] [18] 18许允斗， 王超， 赵春霖， 等. 2RPU/UPR+RP五自由度混联机器人参数标定研究［J］. 光学 精密工程， 2020， 28（1）： 119-129. doi: 10.3788/ope.20202801.0119XUY D， WANGCH， ZHAOCH L， et al. Parameter calibration of five-degree-of-freedom hybrid robot 2RPU/UPR+RP［J］. Opt. Precision Eng.， 2020， 28（1）： 119-129. （in Chinese）. doi: 10.3788/ope.20202801.0119

[19] [19] 19杨聚庆， 王大勇， 董登峰， 等. 激光测量标定机器人坐标系位姿变换的正交化解算［J］. 光学 精密工程， 2018， 26（8）： 1985-1993. doi: 10.3788/OPE.20182608.1985YANGJ Q， WANGD Y， DONGD F， et al. Laser measurement based evaluation for orthogonal transformation calibration of robot pose［J］. Opt. Precision Eng.， 2018， 26（8）： 1985-1993. （in Chinese）. doi: 10.3788/OPE.20182608.1985

[20] [20] 20汪平平. 柔性坐标测量机精度理论及应用技术研究［D］. 合肥：合肥工业大学，2006. doi: 10.1117/12.716193WANGP P. Research on Precision Theory and Application Technology of Flexible Coordinate Measuring Machine［D］. Hefei：Hefei University of Technology， 2006. （in Chinese）. doi: 10.1117/12.716193

[21] ASMAI SEL, HENNEBELLE F, COOREVITS T et al. Proposition of a periodic verification test for Articulated Arm Coordinate Measuring Machines using a small 3D artefact[J]. Measurement, 154, 107472(2020).

[22] ZHAO H N, YU L D, CAO J M et al. Improving the measuring length accuracy of articulated arm coordinate measuring machine using artificial neural network[J]. Review of Scientific Instruments, 91, 125106(2020).