[1] [1] ZHAO Yang, GONG Yan. Methods of enhancing uniformities of output beams from beam expanding unit for illumination system of deep-ultraviolet lithography[J]. Acta Optica Sinica, 2012, 32(8): 0822004.

[2] [2] ZHAN Ping-ping, LIU Wei-guo. Development of extreme ultraviolet lithography[J]. Science & Technology information, 2011, 21(2): 44-45.

[3] [3] HARRY J LEVINSON. Principles of Lithography, third edition[C]. SPIE, 2010, 2467: 321-322.

[4] [4] BERNHARD K, PAUL G. Catadioptric lens design: the breakthrough to hyper-NA optics[C]. SPIE, 2006, 6154: 615420.

[5] [5] VMBERTO I, MICHIEL K, ELIO D. Laser bandwidth effect on overlay budget and imaging for the 45 nm and 32 nm technology nodes with immersion lithography[C]. SPIE, 2010, 7640: 76402B.

[6] [6] PENG Hai-feng, SUN Zhen. Design and analysis of a precision axial adjusting mechanism for optical elements in lithographic lens[J]. Acta Photonica Sinica, 2014, 43(4): 0422005.

[7] [7] HONG Yong-feng, ZHANG Xue-ming, CHENG Xin. Miniaturization design of aerial zoom lenses[J]. Opto-Electronic Engineering, 2010, 37(3): 61-65.

[8] [8] MIKS A, NOVAK J. Three-component doubleconjugate zoom lens system from tunable focus lenses[J]. Applied Optics, 2013, 53(4): 862-865.

[9] [9] FAN Zeng-ming, LI Zhou, QIAN Li-xun. Aspherical lens laser beam shaping system[J]. Infrared and Laser Engineering, 2012, 41(2): 353-357.

[10] [10] FORBES G W, ROBUS T, Efficient computational methods for axially symmetric optical aspheres[J]. Optics Express, 2010, 18(19): 19700-19712.

[11] [11] ZHANG L, LIU D, SHI T, et al. Practical and accurate method for aspheric misalignment aberrations calibration in non-nullinterferometric testing[J]. Applied Opitcs, 2013, 52(35): 8501-8511.

[12] [12] MA Ying-jun, ZHANG Bao, HONG Yong-feng. Aberration automatic design of continuous zoom optical system[J]. Acta Optical Sinica, 2015, 33(8): 0822003.

[13] [13] LI Lin,WANG Yong-tian, ZHANG Li-qin, et al. An approach on the calculation of gaussian parameters of zoom lenses[J]. Transactions of Beijing Institute of Technology, 2003, 23(4): 424-427.