[1] [1] LI ZH G, G GAO L M, ZHANG B N, et al.. Design and experiment of momentum balance wheels for optoelectric tracking gimbals ［J］. Opt. Precision Eng., 2013, 21(1): 62-68. (in Chinese)

[2] [2] WANG Y P, WANG K, JIA R D, et al.. Design and application of accurate pointing and auto-unlocking sun tracker on satellite［J］. Opt. Precision Eng., 2016, 24(1): 65-72. (in Chinese)

[3] [3] WANG SH J, JIN G, XU K. Design of simulation platform for high precision laser communication small satellite constellation［J］. Opt. Precision Eng., 2008, 16(8): 1554-1559. (in Chinese)

[4] [4] CUI P L, ZHANG H J, YAN N, et al.. Performance testing of a magnetically suspended double gimbal control moment gyro based on the single axis air bearing table ［J］. Sensors, 2012, 12(7): 9129-9145.

[5] [5] INUMOH L O, FORSHAW J L, HORRI N M. Tilted wheel satellite attitude control with air-bearing table experimental results ［J］. Acta Astronautica, 2015, 117:414-429.

[6] [6] TIAN L D, ZHAO J K, XUE X, et al.. Measurement method angular momentum output based on one-axis air bearing test-bed［J］. China Measurement & Test, 2011, 37(6): 41-44. (in Chinese)

[7] [7] RAO W D, XU L J. A simulation test-bed for rapid maneuver experiment of flexible satellite ［J］. Aerospace Control and Application, 2011, 37(5):59-62. (in Chinese)

[8] [8] JANA L S, MASON A P, CHARISTOPPHER D H. Historical review of air-bearing spacecraft simulators ［J］. Journal of Guidance, Control, and Dynamics,2003, 26(4): 513-522.

[9] [9] MASON A P, ANDREW R C. An air bearing-based teat-bed for momentum-control systems and spacecraft line of sight ［C］. Proceedings of the 13th AAS/AIAA Space Flight Mechanics Winter Meeting, AAS03-127.

[10] [10] KIM B, VELENIS E, KRIENGSIRI P, et al.. A spacecraft simulator for research and education［C］. AAS/AIAA Astrodynamics Conference, Quebec City, Canada, 2001, AAS 01-367.

[11] [11] JUNG D, TSIOTRAS P. A 3-dof experimental test-bed for integrated attitude dynamics and control research［C］. AIAA Guidance, Navigation and Control Conference, Austin, Texas, 2003, 03-5331.

[12] [12] BLACKWOOD G, SERABYN E, DUBOVITSKY S, et al.. System design and technology development for the terrestrial planet finder［C］. SPIE International Symposium on Optical Science and Technology, SPES 48th Annual Meeting, San Diego, California, 2003: 5170-29.

[13] [13] TIEN J Y, SRINIVASAN J M, YONG L E, et al.. Formation acquisition sensor for the terrestrial planet finder mission ［C］. IEEE Aerospace Conference Proceedings, Big Sky, Montana, 2004: 6-13.

[14] [14] OTERO A S, CHEN A, MOLLER D W, et al.. SPHERES-development of an ISS laboratory for formation flight and docking research［C］. IEEE Aerospace Conference Proceedings, Piscataway, NJ, 2002: 1-59.

[15] [15] WETTE M, SOHL G, SCHARF D, et al.. The formation algorithms and simulation testbed［C］. New York Times Book Review, 2004, 29(5).

[16] [16] REGEHR M W, ACIKMESE A B, AHMED A, et al.. The formation control testbed［C］. IEEE Aerospace Conference Proceedings, Big Sky, Montana, 2004: 557-564.

[17] [17] XU K, CHEN CH Q, GUANG W C, et al.. Design of xPC semi-physical simulation system for small-satellite attitude control［J］. Opt. Precision Eng., 2009, 17(2): 557-564. (in Chinese)

[18] [18] XU Z F. Research on Vortex Torque of the Three-axis Air Bearing Testbed Caused by Manufacture Errors and Fix-errors of Ball Bearing［D］. Harbin: Harbin Institute of Technology, 2007. (in Chinese)

[19] [19] XIANG D, YANG Q J, BAO G, et al.. Research on analyzing and compensation of the steady disturbing torque of the three axis air bearing table［J］. Journal of Astronautics, 2009, 30(2): 448-452. (in Chinese)

[20] [20] GUO N N. Study on the Critical Measurement Technology in Three-axis Simulator Used for Satellite Simulation［D］. Harbin: Harbin Institute of Technology, 2012. (in Chinese)

[21] [21] YAO Y X, DU J J, LIU T, et al.. Numerical analysis of manufacturing error influence on vortex torque of externally pressurized gas bearings［J］. Acta Aeronautica Et Astronautica Sinica, 2003, 24(2): 124 -128. (in Chinese)

[22] [22] LIANG Y CH, LIU J SH, SUN Y ZH, et al.. Effects of slit width and film thickness on vortex torque of air supported gyroscope ［J］. Lubrication Engineering, 2011, 36(3):1-5. (in Chinese)

[23] [23] QIN D L, YAO Y X. Disturbing torque analysis of orifice compensated hybrid gas spherical bearing［J］. Lubrication Engineering, 2007, 32(4): 131-135. (in Chinese)

[24] [24] BI G L. Research on Technical Implementation of Three-axis Air Bearing System［D］. Harbin: Harbin Institute of Technology, 2012. (in Chinese)

[25] [25] WANG X G. Study of Vortex Moment of the Three Degree of Freedom Air Bearing Table ［D］. Harbin: Harbin Institute of Technology, 2006. (in Chinese)

[26] [26] REN D. Study on Static Characteristics and Vortex Torque of Spherical Air Bearings for Three-axis Test-bed ［D］. Harbin: Harbin Institute of Technology, 2009. (in Chinese)

[27] [27] LIN ZH H, DONG Y F. Balance of single axis air bearing table based on its swing characteristics ［J］. Science & Technology Review, 2010, 28(2):46-49. (in Chinese)

[28] [28] ZHANG Y, SUN N, CAO G H. The regularity analysis of low velocity free rotation of single axis air bearing table ［J］. Journal of Engineering Design, 2009, 16(6): 436-439. (in Chinese)

[29] [29] DU J J, YAO Y X, GAO D, et al.. A numerical analysis of vortex torque of externally pressurized gas journal thrust bearings ［J］. Lubrication Engineering, 2005, (3):57-59. (in Chinese)