Microelectronics, Volume. 54, Issue 2, 298(2024)

High-Frequency Characteristic Analysis and Optimization of 3D-Packaging Through Glass Via

HUANG Genxin1, HUANG Chunyue2, LI Peng1, and TAN Lijuan3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less

    A simulation analysis model of a 3D-packaging through glass via (TGV) was established. The highfrequency signal characteristics of TGV were analyzed, and the simulation results of the return loss (S11) were obtained. The influences of the signal frequency, type, maximum diameter, height, and minimum diameter of the TGV on the S11 were studied. The maximum diameter, height, and minimum diameter of the TGV were selected as the design parameters, and the S11 at 10 GHz was obtained as the target value. Seventeen groups of experimental simulation calculations were designed using the response surface method, and the relationship between the S11 of the TGV and its key structural parameters was fitted. The fitting model was optimized by combining a genetic algorithm, and the optimal combination parameters of the TGV S11 were obtained as follows: a maximum diameter of 65 μm, height of 360 μm, and minimum diameter of 44 μm. The optimal combination parameters were verified.The simulation results of the optimal combination parameters are 1.593 5 dB less than the S11 of the basic model,and the structure of the TGV is optimized.

    Tools

    Get Citation

    Copy Citation Text

    HUANG Genxin, HUANG Chunyue, LI Peng, TAN Lijuan. High-Frequency Characteristic Analysis and Optimization of 3D-Packaging Through Glass Via[J]. Microelectronics, 2024, 54(2): 298

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jul. 17, 2022

    Accepted: --

    Published Online: Aug. 21, 2024

    The Author Email:

    DOI:10.13911/j.cnki.1004-3365.220271

    Topics