Optics and Precision Engineering, Volume. 31, Issue 14, 2031(2023)
Polarized laser scattering detection method for subsurface microcracks in quartz glass
[1] [1] 1叶卉, 李晓峰, 崔壮壮, 等. 熔石英玻璃高效低缺陷磁辅助抛光[J]. 光学 精密工程, 2022, 30(15): 1857-1867. doi: 10.37188/OPE.20223015.1857YEH, LIX F, CUIZH ZH, et al. Magnetic-assisted polishing of fused silica optics with high efficiency and low defects[J]. Opt. Precision Eng., 2022, 30(15): 1857-1867.(in Chinese). doi: 10.37188/OPE.20223015.1857
[2] P LI, T JIN, H XIAO et al. Effects of wheel speed on surface/subsurface damage characteristics in grinding of glass-ceramics. Ceramics International, 46, 17717-17728(2020).
[3] J YIN, Q BAI, Y LI et al. Formation of subsurface cracks in silicon wafers by grinding. Nanotechnology and Precision Engineering, 1, 172-179(2018).
[4] A SOLHTALAB, H ADIBI, A ESMAEILZARE et al. Cup wheel grinding-induced subsurface damage in optical glass BK7: an experimental, theoretical and numerical investigation. Precision Engineering, 57, 162-175(2019).
[5] [5] 5马彬, 侯志强, 焦宏飞, 等. 脉冲激光损伤阈值测量技术及光学元件损伤性能[J]. 光学 精密工程, 2022, 30(21): 2805-2826. doi: 10.37188/ope.20223021.2805MAB, HOUZ Q, JIAOH F, et al. Pulsed laser-induced damage threshold measurement and damage performance of optical components[J]. Opt. Precision Eng., 2022, 30(21): 2805-2826.(in Chinese). doi: 10.37188/ope.20223021.2805
[6] [6] 6周明, 黄铖, 赵培轶, 等. 光学玻璃超声振动磨削亚表面损伤的试验研究[J]. 工具技术, 2017, 51(7):15-19. doi: 10.3969/j.issn.1000-7008.2017.07.004ZHOUM, HUANGC, ZHAOP Y, et al. Experimental investigation on subsurface damagesin ultrasonic assisted grinding of optical glass[J]. Tool Engineering, 2017, 51(7): 15-19.(in Chinese). doi: 10.3969/j.issn.1000-7008.2017.07.004
[7] [7] 7郭强生, 靳卫国, 周庆亚. 集成电路粘片机视觉检测技术研究[J]. 电子工业专用设备, 2005, 34(7): 34-40. doi: 10.3969/j.issn.1004-4507.2005.07.008GUOQ S, JINW G, ZHOUQ Y. Vision inspection technology of IC die bonder[J]. Equipment for Electronic Products Manufacturing, 2005, 34(7): 34-40.(in Chinese). doi: 10.3969/j.issn.1004-4507.2005.07.008
[8] [8] 8朱永伟, 李信路, 王占奎, 等. 光学硬脆材料固结磨料研磨中的亚表面损伤预测[J]. 光学 精密工程, 2017, 25(2): 367-374. doi: 10.3788/ope.20172502.0367ZHUY W, LIX L, WANGZ K, et al. Subsurface damage prediction for optical Hard-brittle material in fixed abrasive lapping[J]. Opt. Precision Eng., 2017, 25(2): 367-374.(in Chinese). doi: 10.3788/ope.20172502.0367
[9] J A RANDI, J C LAMBROPOULOS, S D JACOBS. Subsurface damage in some single crystalline optical materials. Applied Optics, 44, 2241(2005).
[10] J F YIN, Q BAI, B ZHANG. Methods for detection of subsurface damage: a review. Chinese Journal of Mechanical Engineering, 31, 1-14(2018).
[11] [11] 11陈明君, 王会尧, 程健, 等. 熔石英光学元件加工亚表面缺陷检测及抑制技术研究进展[J]. 机械工程学报, 2021, 57(20): 1-19. doi: 10.3901/jme.2021.20.001CHENM J, WANGH Y, CHENGJ, et al. Research progress on detection and suppression technology of subsurface defects in fused Shi Ying optical components processing[J]. Journal of Mechanical Engineering, 2021, 57(20): 1-19.(in Chinese). doi: 10.3901/jme.2021.20.001
[12] T CONTRERAS JAIMES ALTAIR, D P M ARACELI, H KATRIN et al. Deepening our understanding of bioactive glass crystallization using TEM and 3D nano-CT. Journal of the European Ceramic Society, 41, 4958-4969(2021).
[13] R K WANG, V V TUCHIN. Optical Coherence Tomography: Light Scattering and Imaging Enhancement, 665-742(2012).
[14] [14] 14许逸轩, 蒋正东, 王华林, 等. 亚表面损伤深度测量的理论研究与实验分析[J]. 激光与光电子学进展, 2016, 53(11): 111401.XUY X, JIANGZ D, WANGH L, et al. Theoretical research and experimental analysis on the depth measurement of subsurface damage[J]. Laser & Optoelectronics Progress, 2016, 53(11):111401.(in Chinese)
[15] [15] 15王宁昌, 姜峰, 黄辉, 等. 脆性材料亚表面损伤检测研究现状和发展趋势[J]. 机械工程学报, 2017, 53(9): 170-179. doi: 10.3901/jme.2017.09.170WANGN C, JIANGF, HUANGH, et al. Review on brittle material subsurface damage detection technology[J]. Journal of Mechanical Engineering, 2017, 53(9): 170-179.(in Chinese). doi: 10.3901/jme.2017.09.170
[16] J F YIN, Q BAI, B ZHANG. Subsurface damage detection on ground silicon wafers using polarized laser scattering. Journal of Manufacturing Science and Engineering, 141, 101012(2019).
[17] [17] 17李庆鹏, 白倩, 张璧. 偏振激光散射检测单晶硅片磨削后的亚表面微裂纹[J]. 金刚石与磨料磨具工程, 2020, 40(4): 87-92.LIQ P, BAIQ, ZHANGB. Detection of subsurface microcracks after grinding of single crystal silicon wafer by polarized laser scattering[J]. Diamond & Abrasives Engineering, 2020, 40(4)87-92(in Chinese)
[18] J YIN, Q BAI, H HAITJEMA et al. Two-dimensional detection of subsurface damage in silicon wafers with polarized laser scattering. Journal of Materials Processing Technology, 284, 116746(2020).
[19] [19] 19白倩, 马浩, 殷景飞. 基于偏振激光共聚焦的研磨石英玻璃亚表面损伤检测[J]. 光学 精密工程, 2021, 29(8): 1795-1803. doi: 10.37188/OPE.20212908.1795BAIQ, MAH, YINJ F. Polarized laser confocal technique for subsurface damage of lapped quartz glass[J]. Opt. Precision Eng., 2021, 29(8): 1795-1803.(in Chinese). doi: 10.37188/OPE.20212908.1795
[20] [20] 20张云涛, 邓小伟, 吴益文, 等. 连续球压痕试验检测金属材料应变硬化指数方法的修正[J]. 机械工程材料, 2022, 46(9): 70-75. doi: 10.11973/jxgccl202209012ZHANGY T, DENGX W, WUY W, et al. Correction of detecting method for strain hardening exponent of metallic materials by continuous spherical indentation test[J]. Materials for Mechanical Engineering, 2022, 46(9): 70-75.(in Chinese). doi: 10.11973/jxgccl202209012
[21] [21] 21陈小文, 韩宇栋, 丁小平, 等. 水泥净浆弹性模量的纳米压痕表征与多尺度计算[J]. 上海交通大学学报, 2022, 56(9): 1199-1207.CHENX W, HANY D, DINGX P, et al. Multiscale calculation of elastic modulus of cement paste based on grid nanoindentation technology[J]. Journal of Shanghai Jiao Tong University, 2022, 56(9):1199-1207.(in Chinese)
[22] J J WANG, C L ZHANG, P F FENG et al. A model for prediction of subsurface damage in rotary ultrasonic face milling of optical K9 glass. The International Journal of Advanced Manufacturing Technology, 83, 347-355(2016).
[23] J CHEN, Q FANG, P LI et al. Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding. International Journal of Machine Tools and Manufacture, 91, 12-23(2015).
[24] [24] 24王卓, 吴宇列, 戴一帆, 等. 光学材料研磨亚表面损伤的快速检测及其影响规律[J]. 光学 精密工程, 2008, 16(1): 16-21. doi: 10.3321/j.issn:1004-924X.2008.01.004WANGZ, WUY L, DAIY F, et al. Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity[J]. Opt. Precision Eng., 2008, 16(1): 16-21.(in Chinese). doi: 10.3321/j.issn:1004-924X.2008.01.004
[25] J C LAMBROPOULOS, Y LI, P D FUNKENBUSCH et al. Noncontact Estimate of Grinding-Induced Subsurface Damage. Denver, 3782, 41-50(1999).
[26] S LI, Z WANG, Y WU. Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes. Journal of Materials Processing Technology, 205, 34-41(2008).
Get Citation
Copy Citation Text
Qixin LÜ, Fangyuan SHI, Qian BAI, Xiaoxiong JIANG, Lili JIANG. Polarized laser scattering detection method for subsurface microcracks in quartz glass[J]. Optics and Precision Engineering, 2023, 31(14): 2031
Category: Modern Applied Optics
Received: Jan. 16, 2023
Accepted: --
Published Online: Aug. 2, 2023
The Author Email: BAI Qian (baiqian@dlut.edu.cn)