Interface engineering yields efficient perovskite light-emitting diodes

Rashid Khan; Guangyi Shi; Wenjing Chen; Zhengguo Xiao; Liming Ding

doi:10.1088/1674-4926/44/12/120501

Journal of Semiconductors, Volume. 44, Issue 12, 120501(2023)

Interface engineering yields efficient perovskite light-emitting diodes

Rashid Khan¹, Guangyi Shi¹, Wenjing Chen¹, Zhengguo Xiao^1、*, and Liming Ding^2、**

¹Key Laboratory of Strongly-Coupled Quantum Matter Physics (CAS), Department of Physics, University of Science and Technology of China, Hefei 230026, China

²Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

show less

References(35)

[1] A Kojima, K Teshima, Y Shirai et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 131, 6050(2009).

[2] M A Green, A Ho-Baillie, H J Snaith. The emergence of perovskite solar cells. Nat Photonics, 8, 506(2014).

[3] Z G Xiao, Y B Yuan, Q Wang et al. Thin-film semiconductor perspective of organometal trihalide perovskite materials for high-efficiency solar cells. Mater Sci Eng R Rep, 101, 1(2016).

[4] H Min, D Y Lee, J Kim et al. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes. Nature, 598, 444(2021).

[5] S Zhang, F Y Ye, X Y Wang et al. Minimizing buried interfacial defects for efficient inverted perovskite solar cells. Science, 380, 404(2023).

[6] Z K Tan, R S Moghaddam, M L Lai et al. Bright light-emitting diodes based on organometal halide perovskite. Nat Nanotechnol, 9, 687(2014).

[7] Z G Xiao, R A Kerner, L F Zhao et al. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites. Nat Photonics, 11, 108(2017).

[8] J Chen, P C Ma, W J Chen et al. Overcoming outcoupling limit in perovskite light-emitting diodes with enhanced photon recycling. Nano Lett, 21, 8426(2021).

[9] G Q Cheng, Y Liu, T Chen et al. Efficient all-inorganic perovskite light-emitting diodes with improved operation stability. ACS Appl Mater Interfaces, 12, 18084(2020).

[10] D Ye, Z J Li, W J Chen et al. Stable yellow light-emitting diodes based on quasi-two-dimensional perovskites. ACS Appl Mater Interfaces, 14, 34918(2022).

[11] X K Liu, W D Xu, S Bai et al. Metal halide perovskites for light-emitting diodes. Nat Mater, 20, 10(2021).

[12] R Khan, S L Chu, Z J Li et al. High radiance of perovskite light-emitting diodes enabled by perovskite heterojunctions. Adv Funct Mater, 32, 2203650(2022).

[13] L T Dou, Y Yang, J B You et al. Solution-processed hybrid perovskite photodetectors with high detectivity. Nat Commun, 5, 5404(2014).

[14] S Yakunin, M Sytnyk, D Kriegner et al. Detection of X-ray photons by solution-processed lead halide perovskites. Nat Photonics, 9, 444(2015).

[15] H T Wei, Y J Fang, P Mulligan et al. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals. Nat Photonics, 10, 333(2016).

[16] Q S Chen, J Wu, X Y Ou et al. All-inorganic perovskite nanocrystal scintillators. Nature, 561, 88(2018).

[17] Z G Xiao, Y B Yuan, Y C Shao et al. Giant switchable photovoltaic effect in organometal trihalide perovskite devices. Nat Mater, 14, 193(2015).

[18] Z G Xiao, J S Huang. J Energy-efficient hybrid perovskite memristors and synaptic devices. Adv Electron Mater, 2, 1600100(2016).

[19] Z Fang, W Chen, Y Shi et al. Dual passivation of perovskite defects for light-emitting diodes with external quantum efficiency exceeding 20%. Adv Funct Mater, 30, 1909754(2020).

[20] V D’Innocenzo, A R Srimath Kandada, M De Bastiani et al. Tuning the light emission properties by band gap engineering in hybrid lead halide perovskite. J Am Chem Soc, 136, 17730(2014).

[21] Z Liu, W D Qiu, X M Peng et al. Perovskite light-emitting diodes with EQE exceeding 28% through a synergetic dual-additive strategy for defect passivation and nanostructure regulation. Adv Mater, 33, 2103268(2021).

[22] J S Kim, J M Heo, G S Park et al. Ultra-bright, efficient and stable perovskite light-emitting diodes. Nature, 611, 688(2022).

[23] W H Bai, T T Xuan, H Y Zhao et al. Perovskite light-emitting diodes with an external quantum efficiency exceeding 30%. Adv Mater, 35, 2302283(2023).

[24] Y W Guo, S Apergi, N Li et al. Phenylalkylammonium passivation enables perovskite light emitting diodes with record high-radiance operational lifetime: The chain length matters. Nat Commun, 12, 644(2021).

[25] H Kim, S U Lee, D Y Lee et al. Optimal interfacial engineering with different length of alkylammonium halide for efficient and stable perovskite solar cells. Adv Energy Mater, 9, 1902740(2019).

[26] X F Ye, H K Cai, Q H Sun et al. Alkyl ammonium salt with different chain length for high-efficiency and good-stability 2D/3D hybrid perovskite solar cells. Org Electron, 106, 106542(2022).

[27] W H Feng, C X Zhang, J X Zhong et al. Correlating alkyl chain length with defect passivation efficacy in perovskite solar cells. Chem Comm, 56, 5006(2020).

[28] P J Zhao, J Subbiah, B L Zhang et al. Alkyl chain length-dependent amine-induced crystallization for efficient interface passivation of perovskite solar cells. Adv Mater Interfaces, 10, 2202313(2023).

[29] H Na, Q L Meng, J Cha et al. Passivating detrimental grain boundaries in perovskite films with strongly interacting polymer for achieving high-efficiency and stable perovskite solar cells. Appl Surf Sci, 626, 157209(2023).

[30] F Wang, S Bai, W Tress et al. Defects engineering for high-performance perovskite solar cells. NPJ Flex Electron, 2, 22(2018).

[31] T S Sherkar, C Momblona, L Gil-Escrig et al. Recombination in perovskite solar cells: Significance of grain boundaries, interface traps, and defect ions. ACS Energy Lett, 2, 1214(2017).

[32] X Y Shen, K Kang, Z K Yu et al. Passivation strategies for mitigating defect challenges in halide perovskite light-emitting diodes. Joule, 7, 272(2023).

[33] Z Liu, K Meng, X Wang et al. In situ observation of vapor-assisted 2D-3D heterostructure formation for stable and efficient perovskite solar cells. Nano Lett, 20, 1296(2020).

[34] Y C Shao, Z G Xiao, C Bi et al. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells. Nat Commun, 5, 5784(2014).

[35] B P Kore, W Zhang, B W Hoogendoorn et al. Moisture tolerant solar cells by encapsulating 3D perovskite with long-chain alkylammonium cation-based 2D perovskite. Commun Mater, 2, 100(2021).

Tools

Get Citation

Copy Citation Text

Rashid Khan, Guangyi Shi, Wenjing Chen, Zhengguo Xiao, Liming Ding. Interface engineering yields efficient perovskite light-emitting diodes[J]. Journal of Semiconductors, 2023, 44(12): 120501

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Articles

Received: Oct. 17, 2023

Accepted: --

Published Online: Mar. 13, 2024

The Author Email: Xiao Zhengguo (ZGXiao), Ding Liming (LMDing)

DOI:10.1088/1674-4926/44/12/120501

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology