[2] A Augusto, J Karas, P Balaji et al. Exploring the practical efficiency limit of silicon solar cells using thin solar-grade substrates. J Mater Chem A, 8, 16599(2020).

[3] F X Ji, C L Zhou, J J Zhu et al. Surface related degradation phenomena in P-type multi-crystalline silicon at elevated temperature and illumination. Sol Energy, 204, 26(2020).

[4] T T Le, Z S Yang, W S Liang et al. Gettering of iron by aluminum oxide thin films on silicon wafers: Kinetics and mechanisms. J Appl Phys, 135, 063102(2024).

[5] D Ding, G L Lu, Z P Li et al. High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts. Sol Energy, 193, 494(2019).

[6] A Richter, J Benick, F Feldmann et al. N-Type Si solar cells with passivating electron contact: Identifying sources for efficiency limitations by wafer thickness and resistivity variation. Sol Energy Mater Sol Cells, 173, 96(2017).

[7] A Richter, J Benick, R Müller et al. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells. Prog Photovolt Res Appl, 26, 579(2017).

[8] M A Green, E D Dunlop, J Hohl-Ebinger et al. Solar cell efficiency tables (version 60). Prog Photovolt Res Appl, 30, 687(2022).

[9] R Peibst, Y Larionova, S Reiter et al. Implementation of n+ and p+ poly junctions on front and rear side of double-side contacted industrial silicon solar cells, 323(2016).

[10] Y F Chen, D M Chen, C F Liu et al. Mass production of industrial tunnel oxide passivated contacts (i-TOPCon) silicon solar cells with average efficiency over 23% and modules over 345W. Prog Photovolt Res Appl, 27, 827(2019).

[11] D Yan, A Cuevas, Y M Wan et al. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers. Sol Energy Mater Sol Cells, 152, 73(2016).

[12] T Gao, Q Yang, X Q Guo et al. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells. Sol Energy Mater Sol Cells, 200, 109926(2019).

[13] A Merkle, S Seren, H Knauss et al. Atmospheric pressure chemical vapor deposition of in-situ doped amorphous silicon layers for passivating contacts, 785(2018).

[14] S H Li, M Pomaska, J Hoß et al. Poly-Si/SiOx/c-Si passivating contact with 738 mV implied open circuit voltage fabricated by hot-wire chemical vapor deposition. Appl Phys Lett, 114, 153901(2019).

[15] S H Li, M Pomaska, J Hoß et al. In situ-doped silicon thin films for passivating contacts by hot-wire chemical vapor deposition with a high deposition rate of 42 nm/min. ACS Appl Mater Interfaces, 11, 30493(2019).

[16] D Yan, A Cuevas, S P Phang et al. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films. Appl Phys Lett, 113, 061603(2018).

[17] K Tao, S Jiang, R Jia et al. The impact of indium tin oxide deposition and post annealing on the passivation property of TOPCon solar cells. Sol Energy, 176, 241(2018).

[18] Y G Tao, E L Chang, A Upadhyaya et al. 730 mV implied Voc enabled by tunnel oxide passivated contact with PECVD grown and crystallized n+ polycrystalline Si, 1(2015).

[19] F Feldmann, M Simon, M Bivour et al. Carrier-selective contacts for Si solar cells. Appl Phys Lett, 104, 181105(2014).

[20] H Park, H Park, S J Park et al. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage. Sol Energy Mater Sol Cells, 189, 21(2019).

[21] A Morisset, R Cabal, V Giglia et al. Evolution of the surface passivation mechanism during the fabrication of ex-situ doped poly-Si(B)/SiOx passivating contacts for high-efficiency c-Si solar cells. Sol Energy Mater Sol Cells, 221, 110899(2021).

[22] D Kang, H C Sio, J Stuckelberger et al. Comparison of firing stability between p- and n-type polysilicon passivating contacts. Prog Photovolt Res Appl, 30, 970(2022).

[23] Z T Ding, D Yan, J Stuckelberger et al. Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping. Sol Energy Mater Sol Cells, 221, 110902(2021).

[24] H J Park, J Kim, D Choi et al. Boron-doped polysilicon using spin-on doping for high-efficiency both-side passivating contact silicon solar cells. Prog Photovolt Res Appl, 31, 461(2023).

[25] Y H Tang, J H Hei, K F Wang et al. Ammonium tetraborate tetrahydrate as a new boron source for the fabrication of p-type emitters in silicon solar cell. Sol Energy, 235, 73(2022).

[26] P Padhamnath, J K Buatis, A Khanna et al. Characterization of screen printed and fire-through contacts on LPCVD based passivating contacts in monoPoly™ solar cells. Sol Energy, 202, 73(2020).

[27] K Necib, T Touam, A Chelouche et al. Investigation of the effects of thickness on physical properties of AZO sol-gel films for photonic device applications. J Alloys Compd, 735, 2236(2018).

[28] S Devasia, S Shaji, D A Avellaneda et al. In situ crystallization of 0D perovskite derivative Cs3Bi2I9 thin films via ultrasonic spray. J Alloys Compd, 893, 162294(2022).

[29] X P Teng, J Chen, B S Sun et al. Study on the nucleation and growth of In2O3 powders for oxide ceramic targets. J Alloys Compd, 921, 166130(2022).

[30] P Padhamnath, N Nampalli, A Khanna et al. Progress with passivation and screen-printed metallization of Boron-doped monoPoly™ layers. Sol Energy, 231, 8(2022).

[31] A Benninghoven, F G Rüdenauer, H W Werner. Secondary ion mass spectrometry: basic concepts, instrumental aspects, applications and trends, 1, 1(1987).

[32] S Flege, W Ensinger. Mass spectrometry in semiconductor research, in: Handbook of mass spectrometry(2012).

[33] D X Han, J D Lorentzen, J Weinberg-Wolf et al. Raman study of thin films of amorphous-to-microcrystalline silicon prepared by hot-wire chemical vapor deposition. J Appl Phys, 94, 2930(2003).

[34] G Z Yue, J D Lorentzen, J Lin et al. Photoluminescence and raman studies in thin-film materials: transition from amorphous to microcrystalline silicon. Appl Phys Lett, 75, 492(1999).

[35] D X Han, K D Wang, J M Owens et al. Hydrogen structures and the optoelectronic properties in transition films from amorphous to microcrystalline silicon prepared by hot-wire chemical vapor deposition. J Appl Phys, 93, 3776(2003).

[36] R Saleh, N H Nickel. Raman spectroscopy of B-doped microcrystalline silicon films. Thin Solid Films, 427, 266(2003).

[37] C Droz, E Vallat-Sauvain, J Bailat et al. Relationship between Raman crystallinity and open-circuit voltage in microcrystalline silicon solar cells. Sol Energy Mater Sol Cells, 81, 61(2004).

[38] N H Nickel, P Lengsfeld, I Sieber. Raman spectroscopy of heavily doped polycrystalline silicon thin films. Phys Rev B, 61, 15558(2000).

[39] U Fano. Effects of configuration interaction on intensities and phase shifts. Phys Rev, 124, 1866(1961).

[40] D P Joshi, R S Srivastava. Mobility and carrier concentration in polycrystalline silicon. Sol Cells, 12, 337(1984).

[41] F Zeudmi Sahraoui, A Kebab, A Bouhekka et al. Optical, structural evolution and surface morphology studies of hydrogenated silicon films synthesized by rf-magnetron sputtering: effects of pressure and radio frequency power at low temperature. Optik, 168, 65(2018).

[42] Q D Chen, J P Wang, Y X Zhang et al. Activation energy study of intrinsic microcrystalline silicon thin film prepared by VHF-PECVD. Optik, 127, 7312(2016).

[43] F Y Lee, Y S Wu, A Joshi et al. Annealing effects on electrical property depth profiles of BF2 and P implanted polycrystalline Si determined by differential Hall effect metrology. J Mater Sci Mater Electron, 33, 16272(2022).

[44] C Y Wu, Z G Meng, S Y Zhao et al. Effects of high temperature post-annealing on the properties of solution-based metal-induced crystallized polycrystalline silicon films. J Mater Sci Mater Electron, 18, 355(2007).

[45] M Rydberg, U Smith. Long-term stability and electrical properties of fluorine doped polysilicon IC-resistors. Mater Sci Semicond Process, 4, 373(2001).

[46] T Antesberger, T A Wassner, C Jaeger et al. Boron- and phosphorus-doped polycrystalline silicon thin films prepared by silver-induced layer exchange. Appl Phys Lett, 102, 212102(2013).

[47] A G Benvenuto, R H Buitrago, A Bhaduri et al. Characterization of thin polycrystalline silicon films deposited on glass by CVD. Semicond Sci Technol, 27, 125013(2012).

[48] A G Benvenuto, R H Buitrago, J A Schmidt. Doped polycrystalline silicon thin films deposited on glass from trichlorosilane. Chem Vap Deposition, 21, 54(2015).

[49] B S So, C R Park, S M Bae et al. Ion activation in boron-doped polycrystalline Si thin films prepared on glass substrates. J Korean Phys Soc, 63, 1362(2013).

[50] F Meyer, A Ingenito, J J Diaz Leon et al. Localisation of front side passivating contacts for direct metallisation of high-efficiency c-Si solar cells. Sol Energy Mater Sol Cells, 235, 111455(2022).

[51] W J Choi, K Madani, Y Y Huang et al. Optimization of in-situ and ex-situ doped p+ passivating contact for high efficiency p-TOPCon solar cell application, 1, 1(2021).

[52] D S Wuu, S Y Lien, J H Wang et al. Laser doping and recrystallization for amorphous silicon films by plasma-enhanced chemical vapor deposition. Mater Sci Forum, 475-479, 3791(2005).

[53] L Ricardo, A Amaral, C Nunes de Carvalho et al. Dopant transfer from poly-Si thin films to c-Si: An alternative technique for device processing. Mater Sci Semicond Process, 42, 210(2016).