[1] [1] Wang M, Wang B, Miao X, et al. Status of cleanliness maintaining in target beam enclosures in SG Ⅲ facilities and contamination sources analysis[J]. Proc. SPIE, 2014, 9280: 54-60.

[5] [5] Li Y, Miao X, Fang Z, et al. Damage behaviors of silica microparticles on fused silica optics under 355 nm high fluence laser[J]. Int. J. Mod. Phys. B, 2022, 36(12n13): 2240068.

[6] [6] Ye H, Cui Z, Yin L, et al. Light-field-enhanced laser damage model for polishing-produced particles in fused silica optical surface[J]. Opt. Laser Technol., 2024, 168: 109905.

[8] [8] Zhao Q, Fan Z, Wang Z. Role of interface absorption in laser-induced local heating of optical coatings[J]. Opt. Eng., 1997, 36(5): 1530-1536.

[10] [10] Palmer J R. Continuous wave laser damage on optical components[J]. Opt. Eng., 1983, 22(4): 435-446.

[11] [11] Gnin F O, Feit M D, Kozlowski M R, et al. Rear-surface laser damage on 355 nm silica optics owing to Fresnel diffraction on front-surface contamination particles[J]. Appl. Opt., 2000, 39(21): 3654-3663.

[12] [12] Ye H, Cui Z, Li Z, et al. Generation of chemical deposits on fused silica optics and their modulation on the light intensity distribution[J]. Appl. Opt., 2022, 61(36): 10669-10680.

[13] [13] Jiang Y, Zhang B, Liu H, et al. Light field modulation of ejected SiO2 particles on fused silica surface[J]. Eur. Phys. J. D, 2021, 75: 1-12.

[14] [14] Raman R N, Demos S G, Shen N, et al. Damage on fused silica optics caused by laser ablation of surface-bound microparticles[J]. Opt. Express, 2016, 24(3): 2634-2647.