[1] Mao L J, Cai M J[J]. Wang G R. Effect of rotation speed on the abrasive-erosive-corrosive wear of steel pipes against steel casings used in drilling for petroleum. Wear, 410/411, 1-10(2018).

[2] Yang X Q, Wang H F, Fan J C. Study on erosion wear property and mechanism of 35CrMo steel[J]. China Petroleum Machinery, 45, 72-77(2017).

[3] Yang X M, Tu Y F, Li L et al. Well-dispersed Chitosan/Graphene oxide nanocomposites[J]. ACS Applied Materials & Interfaces, 2, 1707-1713(2010). http://pubs.acs.org/doi/pdf/10.1021/am100222m

[4] Kong X Y, Yan M K, Zhang L et al. QPQ surface treatment technology and test research for improving erosion resistance property of tools[J]. Oil Field Equipment, 46, 41-45(2017).

[5] Shi Y H, Ye Q S, Liang P et al. Naphthenic acid corrosion and protection of petrochemical industry process equipment[J]. Materials Protection, 50, 68-73, 78(2017).

[6] Koscher B A, Swabeck J K, Bronstein N D et al. Essentially trap-free CsPbBr3 colloidal nanocrystals by postsynthetic thiocyanate surface treatment[J]. Journal of the American Chemical Society, 139, 6566-6569(2017). http://www.ncbi.nlm.nih.gov/pubmed/28448140

[7] Gao B, Zhang R L, He M S et al. Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites[J]. Composites Part A: Applied Science and Manufacturing, 90, 433-440(2016). http://www.sciencedirect.com/science/article/pii/S1359835X16302688

[8] Zang C F, Liu C S, Zhang X B et al. Research progress of laser modification techniques used on roller surface[J]. Materials Review, 24, 6-10(2010).

[9] He B L, Liu J, Wan D Q. Application of laser in processing of magnesium alloy[J]. Hot Working Technology, 39, 113-116(2010).

[10] Yilbas B S, Karatas C, Karakoc H et al. Laser surface treatment of aluminum based composite mixed with B4C particles[J]. Optics & Laser Technology, 66, 129-137(2015). http://www.sciencedirect.com/science/article/pii/S0030399214002187

[11] Malinauskas M, Žukauskas A, Hasegawa S et al. Ultrafast laser processing of materials: From science to industry[J]. Light: Science & Applications, 5, e16133(2016). http://www.nature.com/articles/lsa2016133

[12] Song L P. Laser surface modification and application[J]. Physics and Engineering, 20, 42-44(2010).

[13] Taylor L L, Scott R E, Qiao J. Integrating two-temperature and classical heat accumulation models to predict femtosecond laser processing of silicon[J]. Optical Materials Express, 8, 648-658(2018).

[14] Gupta R K, Sundar R, Kumar B S et al. A hybrid laser surface treatment for refurbishment of stress corrosion cracking damaged 304L stainless steel[J]. Journal of Materials Engineering and Performance, 24, 2569-2576(2015). http://link.springer.com/article/10.1007/s11665-015-1530-1

[15] Verezub O, Kálazi Z, Buza G et al. Classification of laser beam induced surface engineering technologiesand in situ synthesis of steel matrix surface nanocomposites[J]. Surface Engineering, 27, 428-435(2011). http://www.tandfonline.com/doi/abs/10.1179/174329409X446296

[16] Zhang Z Y, Zhang J Y, Wang Y B et al. Surface cleaning of hot-rolled sheet steel by laser ablation of oxide layer using a 100-ns high-repetition frequency pulsed laser[J]. Optical Engineering, 56, 116114(2017).

[17] Gu Y, Zhong M L, Ma M X et al. Fabrication of nanoporous Manganese coatings by selective electrochemical De-alloying of the nobler copper component from laser cladding Cu-Mn alloys[J]. Chinese Journal of Lasers, 38, 0603027(2011).

[18] Fan P X, Bai B F, Zhong M L et al. General strategy toward dual-scale-controlled metallic Micro-Nano hybrid structures with ultralow reflectance[J]. ACS Nano, 11, 7401-7408(2017). http://www.ncbi.nlm.nih.gov/pubmed/28665579/

[19] Ge P F. Application of laser quenching technology in surface hardening of drill pipe joint threads[J]. Inner Mongolia Petrochemical Industry, 41, 119-120(2015).

[20] Hao G H. Research and application of laser quenching technology for spherical floating bearings of cone bit[D]. Chengdu: Southwest Petroleum University(2016).

[21] Hua X J, Hao J W, Wang R et al. Laser quenching technology and friction & wear properties of mud pump high chromium iron material[J]. Surface Technology, 46, 215-220(2017).

[22] Sang J X, Shen J, Zhang X K. A study on the laser quenching of 20CrMnTi gear steel[J]. China's Manganese Industry, 35, 117-121(2017).

[23] Cheng Y Y, Wang Y, Han B et al. Microstructure and properties of 35CrMoA steel in laser quenching-nitriding[J]. Chinese Journal of Lasers, 37, 250-255(2010).

[24] Su H, Ma B, Yi Y H et al. Microstructure and properties of 42CrMo after laser surface melting and quenching[J]. Ordnance Material Science and Engineering, 34, 84-86(2011).

[25] Feng H, Li J F, Sun J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 41, 0803003(2014).

[26] Wang Y X. Microstructure and properties of medium carbon low-alloy steels treated by plasma nitriding and laser quenching[D]. Harbin: Harbin Institute of Technology(2015).

[27] Sun Q. Laser cladding mechanical maintenance in petrochemical applications[J]. Technological Development of Enterprise, 30, 94-95(2011).

[28] Cheng H, Zheng G, Qin C et al. Exploration on laser cladding repair technology for plunger in water injection pump[J]. Machinery, 55, 47-49(2017).

[29] Xiao Z. Analysis of steam turbine cylinder joint surface deformation and laser cladding repairing[J]. Petro-Chemical Equipment, 46, 51-56(2017).

[30] Zhang J C, Feng A X, Xue W et al. Research on crack susceptibility and mechanical properties of CaF2/Ni composite coating by laser cladding[J]. Applied Laser, 37, 22-26(2017).

[31] Sun X L, Han B[J]. Effect of rare earth elements on microstructure and properties of laser alloying layers on N₈₀ oil tube Welding & Joining, 2017, 64-66.

[32] Wang Y, Du J S, Yao J H. The research of laser alloying on the surface of 40cr steel screw[J]. Applied Laser, 27, 470-472(2007).

[33] Yao J H, Yu C Y, Kong F Z et al. Laser alloying and quenching of steam turbine blades[J]. Journal of Power Engineering, 27, 652-656(2007).

[34] Kong D J, Long D, Ye C D et al. Effects of laser shock wave on fatigue properties of X80 pipeline steel welded joints[J]. Transaction of Materials and Heat Treatment, 35, 103-108(2014).

[35] Dai W. A split lip seal method by high energy laser[J]. Petro-Chemical Equipment, 42, 45-48(2013).

[36] Chang Q Y, Qi Y, Wang B et al. Tribological influence of laser surface textures on 45 steel under dry sliding[J]. Journal of Mechanical Engineering, 53, 148-154(2017).

[37] Chen Z Y, Zhou G J, Chen Z H. Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching[J]. Materials Science and Engineering: A, 534, 536-541(2012). http://www.sciencedirect.com/science/article/pii/S0921509311013608

[38] Zheng Y L, Hu Q W, Li C Y et al. A novel laser surface compositing by selective laser quenching to enhance railway service life[J]. Tribology International, 106, 46-54(2017). http://www.sciencedirect.com/science/article/pii/S0301679X16303309

[39] Yan M F, Wang Y X, Chen X T et al. Laser quenching of plasma nitrided 30CrMnSiA steel[J]. Materials & Design, 58, 154-160(2014). http://www.sciencedirect.com/science/article/pii/S0261306914000818

[40] Shi C X, Jiang Y L, Mei Z H et al. Application of laser surface hardening technology for API tubing threads[J]. Oil Field Equipment, 39, 75-78(2010).

[41] Wang Y L, Xu S R, Hui Y L. Research on laser quenching process of 20CrMnMo gears by finite element method and experiment[J]. The International Journal of Advanced Manufacturing Technology, 87, 1013-1021(2016). http://link.springer.com/10.1007/s00170-016-8534-3

[42] Lusquiños F, Conde J C, Bonss S et al. Theoretical and experimental analysis of high power diode laser (HPDL) hardening of AISI 1045 steel[J]. Applied Surface Science, 254, 948-954(2007). http://www.sciencedirect.com/science/article/pii/S0169433207011312

[43] Hui Y L, Wang Y L, Yao C C. Temperature field analysis of laser hardening of 18CrNi8 gear based on ANSYS[J]. Journal of Mechanical Transmission, 39, 102-105, 134(2015).

[44] Paydas H, Mertens A, Carrus R et al. Laser cladding as repair technology for Ti-6Al-4V alloy: Influence of building strategy on microstructure and hardness[J]. Materials & Design, 85, 497-510(2015).

[45] Weng F, Chen C Z, Yu H J. Research status of laser cladding on titanium and its alloys: A review[J]. Materials & Design, 58, 412-425(2014). http://www.sciencedirect.com/science/article/pii/S0261306914001095

[46] Zhang Z L, Qin K M, Li F et al. Surface abrasion resistance performance of laser cladding coating on oil pumping polished rod[J]. Science Technology and Engineering, 10, 3978-3981(2010).

[47] Sun J B, Li M Y, Wang Y et al. -08-01[P]. corrosion resistant iron-based alloy laser-cladding petroleum drill stem joint: CN102619477A.(2012).

[48] Yu C X, Jing C N, Li H X[J]. Forming mechanism and controlling method of laser cladding crack Aeronautical Manufacturing Technology, 2012, 75-79.

[49] Makuch N, Kulka M, Dziarski P et al. Laser surface alloying of commercially pure titanium with boron and carbon[J]. Optics and Lasers in Engineering, 57, 64-81(2014). http://www.sciencedirect.com/science/article/pii/S0143816614000207

[50] Kulka M, Mikolajczak D, Makuch N et al. Wear resistance improvement of austenitic 316L steel by laser alloying with boron[J]. Surface and Coatings Technology, 291, 292-313(2016). http://www.sciencedirect.com/science/article/pii/S0257897216301177

[51] Liu T, Sun G F, Zhang Y K. Microstructure and wear resistance of NiCr-Al2O3 coating alloyed with 45# steel laser[J]. Surface Technology, 45, 64-69(2016).

[52] Adebiyi D I. Popoola A P I. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials & Design, 74, 67-75(2015). http://www.sciencedirect.com/science/article/pii/S0261306915000564

[53] Guo H L, Han B. Effect of molybdenum element on microstructure and properties of laser alloying layers on N80 oil tube[J]. Welded Pipe and Tube, 39, 5-8(2016).

[54] Wang F, Zuo H, Zhao L et al. Surface quality and property of copper treated by laser shock peening[J]. Laser & Optoelectronics Progress, 54, 041410(2017).

[55] Lei Z L, Tian Z, Chen Y B. Laser cleaning technology in industrial fields[J]. Laser & Optoelectronics Progress, 55, 030005(2018).

[56] Chen Y M, Zhou L Z, Yan F et al. Mechanism and quality evaluation of laser cleaning of aluminum alloy[J]. Chinese Journal of Lasers, 44, 1202005(2017).