Optics and Precision Engineering, Volume. 31, Issue 3, 340(2023)

Multi-scale decomposition of point cloud data based on wavelet transform

Kaiyuan GAO1... Lei LIU1, Haihua CUI1,*, Pengcheng LI1, Xiaoxu LIU2 and Lin LIU2 |Show fewer author(s)
Author Affiliations
  • 1College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing2006, China
  • 2Beijing Institute of Aerospace Metrology and Testing Technology, Beijing100076, China
  • show less
    References(20)

    [1] [1] 1郭东明. 高性能精密制造[J]. 中国机械工程, 2018, 29(7): 757-765. doi: 10.3969/j.issn.1004-132X.2018.07.001GUOD M. High-performance precision manufacturing[J]. China Mechanical Engineering, 2018, 29(7): 757-765.(in Chinese). doi: 10.3969/j.issn.1004-132X.2018.07.001

    [2] [2] 2王呈, 刘涛, 穆轩, 等. 航空发动机叶片气膜孔测量技术研究[J]. 计测技术, 2012, 32(5): 27-30. doi: 10.3969/j.issn.1674-5795.2012.05.007WANGCH, LIUT, MUX, et al. Research on aero engine blade film hole measuring technology[J]. Metrology & Measurement Technology, 2012, 32(5): 27-30.(in Chinese). doi: 10.3969/j.issn.1674-5795.2012.05.007

    [3] L KONG, X PENG, Y CHEN et al. Multi-sensor measurement and data fusion technology for manufacturing process monitoring: a literature review. International Journal of Extreme Manufacturing, 2, 5-31(2020).

    [4] [4] 4王陈, 孟宪昱, 于瀛洁, 等. 三维微纳米台阶高精度光学显微测量量化表征[J]. 光学 精密工程, 2022, 30(6): 651-658. doi: 10.37188/OPE.20223006.0651WANGCH, MENGX Y, YUY J, et al. High-accuracy characterization of areal micro-nano steps measured with optical microscopes[J]. Optics and Precision Engineering, 2022, 30(6): 651-658.(in Chinese). doi: 10.37188/OPE.20223006.0651

    [5] [5] 5何宝凤, 丁思源, 魏翠娥, 等. 三维表面粗糙度测量方法综述[J]. 光学 精密工程, 2019, 27(1): 78-93. doi: 10.3788/ope.20192701.0078HEB F, DINGS Y, WEIC E, et al. Review of measurement methods for areal surface roughness[J]. Optics and Precision Engineering, 2019, 27(1): 78-93.(in Chinese). doi: 10.3788/ope.20192701.0078

    [6] [6] 6莫程威, 崔海华, 程筱胜, 等. 基于分形维数表征的跨尺度拼接方法[J]. 光学学报, 2018, 38(12): 205-213. doi: 10.3788/aos201838.1215001MOCH W, CUIH H, CHENGX SH, et al. Cross-scale registration method based on fractal dimension characterization[J]. Acta Optica Sinica, 2018, 38(12): 205-213.(in Chinese). doi: 10.3788/aos201838.1215001

    [7] [7] 7喻永前. 基于点云数据的特征约束精简与三维重构技术研究[D]. 上海: 上海大学, 2021.YUY Q. Research on Feature Constraint Simplification and 3D Reconstruction Technology Based on Point Cloud Data[D]. Shanghai: Shanghai University, 2021. (in Chinese)

    [8] [8] 8李海鹏, 徐丹, 付宇婷, 等. 基于FPFH特征提取的散乱点云精简算法[J]. 图学学报, 2022, 43(4): 599-607.LIH P, XUD, FUY T, et al. A scattered point cloud simplification algorithm based on FPFH feature extraction[J]. Journal of Graphics, 2022, 43(4): 599-607.(in Chinese)

    [9] [9] 9田应仲, 喻永前, 薛松. 一种基于双特征约束的三维点云精简算法研究[J]. 工业控制计算机, 2021, 34(10): 80-81, 84. doi: 10.3969/j.issn.1001-182X.2021.10.031TIANY ZH, YUY Q, XUES. Research on 3D point cloud simplification algorithm based on double feature constraints[J]. Industrial Control Computer, 2021, 34(10): 80-81, 84.(in Chinese). doi: 10.3969/j.issn.1001-182X.2021.10.031

    [10] [10] 10牛雪娟, 刘景泰, 孙雷. 基于小波变换的栅格点云多分辨率分析[C].第二十七届中国控制会议论文集. 昆明, 2008: 1235-1239. doi: 10.1109/chicc.2008.4605516NIUX J, LIUJ T, SUNL. Multi-resolution analysis of raster point cloud based on wavelet transform[C]. Proceedings of the 27th Chinese Control Conference, 2008: 341-345. (in Chinese). doi: 10.1109/chicc.2008.4605516

    [11] J DIGNE. An implementation and parallelization of the scale space meshing algorithm. Image Process Line, 5, 282-295(2015).

    [12] [12] 12汪千金, 崔海华, 张益华, 等. 面向光学测量跨源点云的多尺度采样配准方法[J]. 光学学报, 2022, 42(10): 139-148. doi: 10.3788/AOS202242.1015002WANGQ J, CUIH H, ZHANGY H, et al. Multi-scale sampling registration method for optical measurement of cross-source point clouds[J]. Acta Optica Sinica, 2022, 42(10): 139-148.(in Chinese). doi: 10.3788/AOS202242.1015002

    [13] [13] 13王月海, 庄志鹏, 邢娜. 改进的采样一致性点云配准算法[J]. 计算机工程与设计, 2022, 43(5): 1382-1388.WANGY H, ZHUANGZH P, XINGN. Improved sampling consistent point cloud registration algorithm[J]. Computer Engineering and Design, 2022, 43(5): 1382-1388.(in Chinese)

    [14] [14] 14宋成航, 李晋儒, 刘冠杰. 利用特征点采样一致性改进ICP算法点云配准方法[J]. 北京测绘, 2021, 35(3): 317-322.SONGCH H, LIJ R, LIUG J. Point cloud registration method using feature point sampling consistency initial alignment and improved ICP algorithm[J]. Beijing Surveying and Mapping, 2021, 35(3): 317-322.(in Chinese)

    [15] [15] 15刘跃生, 陈新度, 吴磊, 等. 混合稀疏迭代最近点配准[J]. 光学 精密工程, 2021, 29(9): 2255-2267. doi: 10.37188/OPE.20212909.2255LIUY S, CHENX D, WUL, et al. Sparse mixture iterative closest point registration[J]. Optics and Precision Engineering, 2021, 29(9): 2255-2267.(in Chinese). doi: 10.37188/OPE.20212909.2255

    [16] [16] 16冯珂, 黄卓. 超声磨削加工表面分形维数计算方法[J]. 机械管理开发, 2022, 37(2): 1-3, 6.FENGK, HUANGZH. Computation method of fractal features of surface topography in ultrasonic vibration-assisted grinding[J]. Mechanical Management and Development, 2022, 37(2): 1-3, 6.(in Chinese)

    [17] [17] 17刘妮, 张志毅. 相似性维数在点云中的应用[J]. 计算机工程与科学, 2019, 41(9): 1635-1641. doi: 10.3969/j.issn.1007-130X.2019.09.015LIUN, ZHANGZH Y. Application of similarity dimension in point cloud[J]. Computer Engineering & Science, 2019, 41(9): 1635-1641.(in Chinese). doi: 10.3969/j.issn.1007-130X.2019.09.015

    [18] [18] 18叶震, 卞超杰, 梅雨晴, 等. 基于逐点插入法的定尺度三角剖分算法研究[J]. 河南科技, 2022, 41(6): 11-15.YEZ, BIANCH J, MEIY Q, et al. Research on scaling triangulation algorithm based on point by point insertion method[J]. Henan Science and Technology, 2022, 41(6): 11-15.(in Chinese)

    [19] [19] 19张建伟, 孔思迪. 点云三角化处理技术研究[J]. 成都大学学报(自然科学版), 2018, 37(1): 49-51.ZHANGJ W, KONGS D. Research on triangulation processing of point cloud[J]. Journal of Chengdu University (Natural Science Edition), 2018, 37(1): 49-51.(in Chinese)

    [20] [20] 20詹学才. 三维地质模型四面体剖分及优化研究[D]. 成都: 成都理工大学, 2019.ZHANX C. Study on Tetrahedron Division and Optimization of Three-dimensional Geological Model[D]. Chengdu: Chengdu University of Technology, 2019. (in Chinese)

    Tools

    Get Citation

    Copy Citation Text

    Kaiyuan GAO, Lei LIU, Haihua CUI, Pengcheng LI, Xiaoxu LIU, Lin LIU. Multi-scale decomposition of point cloud data based on wavelet transform[J]. Optics and Precision Engineering, 2023, 31(3): 340

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Micro/Nano Technology and Fine Mechanics

    Received: Jun. 29, 2022

    Accepted: --

    Published Online: Mar. 7, 2023

    The Author Email: CUI Haihua (cuihh@nuaa.edu.cn)

    DOI:10.37188/OPE.20233103.0340

    Topics