Journal of Inorganic Materials, Volume. 38, Issue 7, 815(2023)

Laser-induced Self-propagating High-temperature Synthesis of Skutterudite

Lei YAO... Dongwang YANG*, Yonggao YAN and Xinfeng TANG* |Show fewer author(s)
Author Affiliations
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China
  • show less
    References(42)

    [1] D BERETTA, N NEOPHYTOU, J M HODGES et al. Thermoelectrics: from history, a window to the future. Materials Science & Engineering R-Reports, 210(2019).

    [2] S M POURKIAEI, M H AHMADI, M SADEGHZADEH et al. Thermoelectric cooler and thermoelectric generator devices: a review of present and potential applications, modeling and materials. Energy, 115849(2019).

    [3] N JAZIRI, A BOUGHAMOURA, J MULLER et al. A comprehensive review of thermoelectric generators: technologies and common applications. Energy Reports, 264(2020).

    [6] T Z HU, W Q CAO, D W YANG et al. Ultra-fast fabrication of bulk ZrNiSn thermoelectric material through self-propagating high-temperature synthesis combined with in-situ quick pressing. Scripta Materialia, 140(2019).

    [7] X L SU, F FU, Y G YAN et al. Self-propagating high-temperature synthesis for compound thermoelectrics and new criterion for combustion processing. Nature Communications, 4908(2014).

    [8] J ZHANG, T ZHU, C ZHANG et al. In-situ formed nano-pore induced by ultrasonication boosts the thermoelectric performance of Cu2Se compounds. Journal of Alloys and Compounds, 160639(2021).

    [9] T LIANG, X SU, Y YAN et al. Panoscopic approach for high- performance Te-doped skutterudite. NPG Asia Materials, e352(2017).

    [13] O IVANOV, M YAPRINTSEV, A VASIL'EV et al. Microstructure and thermoelectric properties of the medium-entropy block- textured BiSbTe1.5Se1.5 alloy. Journal of Alloys and Compounds, 159743(2021).

    [15] E YAPRINTSEVA, A VASIL'EV, M YAPRINTSEV et al. Thermoelectric properties of medium-entropy PbSbTeSe alloy prepared by reactive spark plasma sintering. Materials Letters, 131416(2022).

    [16] A DELGADO, S CORDOVA, I LOPEZ et al. Mechanically activated combustion synthesis and shockwave consolidation of magnesium silicide. Journal of Alloys and Compounds, 422(2016).

    [17] Q ZHANG, X L SU, Y G YAN et al. Phase segregation and superior thermoelectric properties of Mg2Si1-xSbx (0≤x≤0.025) prepared by ultrafast self-propagating high-temperature synthesis. ACS Applied Materials & Interfaces, 3268(2016).

    [18] Q ZHANG, X L SU, Y G YAN et al. Ultrafast and low-cost preparation of Mg2(Si0.3Sn0.7)(1-y)Sby with superior thermoelectric performance by self-propagating high-temperature synthesis. Scripta Materialia, 507(2019).

    [19] Q ZHANG, J F FAN, W H FAN et al. Energy-efficient synthesis and superior thermoelectric performance of Sb-doped Mg2Si0.3Sn0.7 solid solutions by rapid thermal explosion. Materials Research Bulletin, 110885(2020).

    [20] Y F XING, R H LIU, J C LIAO et al. High-efficiency half-Heusler thermoelectric modules enabled by self-propagating synthesis and topologic structure optimization. Energy & Environmental Science, 3390(2019).

    [22] T Z HU, D W YANG, X L SU et al. Interpreting the combustion process for high-performance ZrNiSn thermoelectric materials. ACS Applied Materials & Interfaces, 864(2018).

    [23] M J KRUSZEWSKI, K CYMERMAN, R ZYBALA et al. High homogeneity and ultralow lattice thermal conductivity in Se/Te- doped skutterudites obtained by self-propagating high-temperature synthesis and pulse plasma sintering. Journal of Alloys and Compounds, 164796(2022).

    [27] G ROGL, J BURSIK, A GRYTSIV et al. Nanostructuring as a tool to adjust thermal expansion in high ZT skutterudites. Acta Materialia, 359(2018).

    [31] Y YAN, H KE, J YANG et al. Fabrication and thermoelectric properties of n-type CoSb2.85Te0.15 using selective laser melting. ACS Applied Materials & Interfaces, 13669(2018).

    [35] B ALINEJAD, A CASTELLERO, M BARICCO. Full dense CoSb3 single phase with high thermoelectric performance prepared by oscillated cooling method. Scripta Materialia, 110(2016).

    [37] Z LI, G FENG, S WANG et al. High-efficiency joining of Cf/Al composites and TiAl alloys under the heat effect of laser-ignited self-propagating high-temperature synthesis. Journal of Materials Science & Technology, 1111(2016).

    [38] N RESNINA, S BELYAEV, A VORONKOV et al. Martensitic transformation and mechanical behavior of porous Ti-50.0at% Ni alloy, fabricated by self-propagating high temperature synthesis at different temperature.

    [42] M S SONG, B HUANG, M X ZHANG et al. Study of formation behavior of TiC ceramic obtained by self-propagating high- temperature synthesis from Al-Ti-C elemental powders. International Journal of Refractory Metals & Hard Materials, 584(2009).

    Tools

    Get Citation

    Copy Citation Text

    Lei YAO, Dongwang YANG, Yonggao YAN, Xinfeng TANG. Laser-induced Self-propagating High-temperature Synthesis of Skutterudite[J]. Journal of Inorganic Materials, 2023, 38(7): 815

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Nov. 28, 2022

    Accepted: --

    Published Online: Dec. 28, 2023

    The Author Email: YANG Dongwang (ydongwang@whut.edu.cn), TANG Xinfeng (tangxf@whut.edu.cn)

    DOI:10.15541/jim20220714

    Topics