[1] Yang L[M]. Advanced optical manufacture technology, 5-10(2009).

[2] Shang C M, Zhang D M, Zhang X M. Lapping model of processing aspheric parts by the method of the lapping tool of bending and forming[J]. Opto-Electronic Engineering, 39, 128-132(2012).

[3] Li S Y, Dai Y F[M]. New technology for manufacturing and measurement of large and middle-scale aspheric surfaces, 100-150(2011).

[4] Tonnellier X, Shore P, Morantz P et al. Surface quality of a 1 m Zerodur part using an effective grinding mode[C]. SPIE, 7102, 71020B(2008).

[5] Andre M L. Status of the LMJ project[C]. SPIE, 3047, 38-42(1997).

[6] Stolz C J. The National Ignition Facility: the world's largest optical system[C]. SPIE, 6834, 683402(2007).

[7] Shore P, Cunningham C, Debra D et al. Precision engineering for astronomy and gravity science[J]. CIRP Annals - Manufacturing Technology, 59, 694-716(2010). http://www.sciencedirect.com/science/article/pii/S0007850610001903/pdf?md5=f86499f507958f93bcb5b2cbbf982469&pid=1-s2.0-S0007850610001903-main.pdf&_valck=1

[8] Guo Y B, Yang W, Wang Z Z et al. Technology and application of ultra-precision machining for large size optic[J]. Journal of Mechanical Engineering, 49, 171-178(2013).

[9] Zhang X Z, Yan G J. Method of hybrid compensation detection-off-axis parabolic mirror[J]. Laser & Optoelectronics Progress, 53, 121203(2016).

[10] Liu L, Chen X D, Xiong L et al. Angle error investigation in laser tracker testing large aspheric mirrors[J]. Chinese Journal of Lasers, 43, 1104003(2016).

[11] Brinksmeier E, Mutlugünes Y, Klocke F et al. Ultra-precision grinding[J]. CIRP Annals - Manufacturing Technology, 59, 652-671(2010).

[12] Shimizu Y, Goto S, Lee J et al. Fabrication of large-size SiC mirror with precision aspheric profile for artificial satellite[J]. Precision Engineering, 37, 640-649(2013). http://www.sciencedirect.com/science/article/pii/S0141635913000147

[13] Cheng H B, Zhang X J, Zheng L G et al. Optimization on testing technology for aspherics grinding[J]. Aviation Precision Manufacturing Technology, 38, 2-3(2002).

[14] Sun W. McBride J W, Hill M. A new approach to characterising aspheric surfaces[J]. Precision Engineering, 34, 171-179(2010).

[15] Hu D J. Precision grinding and adaptive control method for hard and brittle aspheric optical mirror[J]. Acta Optica Sinica, 36, 0722004(2016).

[16] Martin H M, Burge J H, Vecchio C D et al. Optical fabrication of the MMT adaptive, secondary mirror[C]. SPIE, 4007, 502-507(2000).

[17] Comley P, Morantz P, Shore P et al. Grinding metre scale mirror segments for the E-ELT ground based telescope[J]. CIRP Annals - Manufacturing Technology, 60, 379-382(2011). http://www.sciencedirect.com/science/article/pii/S0007850611001211

[18] Wang Y, Su P, Parks R E et al. Swing arm optical coordinate-measuring machine: high precision measuring ground aspheric surfaces using a laser triangulation probe[J]. Optical Engineering, 51, 1-8(2012). http://spie.org/Publications/Journal/10.1117/1.OE.51.7.073603

[19] Jia L D, Zheng Z W, Dai Y F et al. Principle and experiments of swing-arm profilometer[J]. Optics and Precision Engineering, 15, 499-839(2007).

[20] Jia L D, Zheng Z W, Li S Y. Development of a new optical coordinate measuring machine in cylinder coordinates[J]. Optics and Precision Engineering, 14, 835-504(2006).

[21] Cheng H B. Touch trigger probe measurement accuracy of aspherical mirror during fine lapping process[J]. Journal of Mechanical Engineering, 41, 228-232(2005).

[22] Zhu Y L, Guo Y B, Luo W et al. Design of large-size aspheric measurement system and motion accuracy analysis[C]. SPIE, 7656, 765620(2010).

[23] Qiu G F, Guo P J, Xie B et al. Mathematical model of contacting aspheric surface contour measurement[J]. Optics and Precision Engineering, 15, 492-498(2007).

[24] Suzuki H, Onishi T, Moriwaki T et al. Development of a 45° tilted on-machine measuring system for small optical parts[J]. CIRP Annals - Manufacturing Technology, 57, 411-414(2008). http://www.sciencedirect.com/science/article/pii/S0007850608000371

[25] Shimizu Y, Goto S, Lee J et al. Fabrication of large-size SiC mirror with precision aspheric profile for artificial satellite[J]. Precision Engineering, 37, 640-649(2013). http://www.sciencedirect.com/science/article/pii/S0141635913000147

[26] Li B, Zhao H Y, Xi J P et al. On-machine self-calibration method for compensation during precision fabrication of 900-mm-diameter zerodur aspheric mirror[J]. The International Journal of Advanced Manufacturing Technology, 76, 1855-1863(2015). http://link.springer.com/article/10.1007/s00170-014-6413-3

[27] Dong Z C, Cheng H B, Ye X et al. Developing on-machine 3D profile measurement for deterministic fabrication of aspheric mirrors[J]. Applied Optics, 53, 4997-5007(2014). http://www.opticsinfobase.org/abstract.cfm?URI=ao-53-22-4997

[28] Lin X H, Wang Z Z, Guo Y B et al. Research on the error analysis and compensation for the precision grinding of large aspheric mirror surface[J]. The International Journal of Advanced Manufacturing Technology, 71, 233-239(2014). http://link.springer.com/article/10.1007/s00170-013-5430-y

[29] Li J, Lei X Y, Zhong B et al. Research of high efficiency grinding technology for large square aspheric lens[J]. Diamond & Brasives Engineering, 31, 74-78(2011).

[30] Xi J P, Zhao H Y, Li B. Profile error compensation in cross-grinding mode for large-diameter aspheric mirrors[J]. The International Journal of Advanced Manufacturing Technology, 83, 1515-1523(2015). http://link.springer.com/article/10.1007/s00170-015-7689-7

[31] Chen F J, Yin S H, Huang H et al. Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 50, 480-486(2010). http://www.sciencedirect.com/science/article/pii/S0890695510000027

[32] He J, Chen L. Measurement of aspheric surfaces by infrared interferometer[J]. Optics and Precision Engineering, 18, 69-74(2010).

[33] Wang J M, Guo P J, Qiu G F. Data processing of off-axis aspheric surface measurement by coordinate contour measuring machine[J]. Optical Technique, 39, 291-296(2013).

[34] Ren T Q. The measurement method and data processing of large aspheric surface[D]. Xiamen: Xiamen University(2010).

[35] Tonnellier X. Precision grinding for rapid manufacturing of large optics[D]. Bedfordshire: Cranfield University(2009).

[36] Guo Y B, Guo J, Wang Z Z. Study on measuring path and high-precision curve fitting algorithm for axisymmetric aspheric optics[J]. China Mechanical Engineering, 19, 1201-1204(2008).

[37] Zhang D X, Yang P, Bi G et al. Stitching measurement technique for large-aperture aspheric surface during grinding process[J]. Journal of Mechanical Engineering, 51, 22-29(2015).

[38] Yang P, Ye S W, Peng Y F. Three-dimensional profile stitching measurement for large aspheric surface during grinding process with sub-micron accuracy[J]. Precision Engineering, 47, 62-71(2017). http://www.sciencedirect.com/science/article/pii/S0141635916300964

[39] Jia L D, Wang J W, Zheng Z W et al. Optimization algorithm for the measurement of vertex radius of aspherics with a swing-arm profilometer[J]. Chinese Journal of Scientific Instrument, 30, 1996-2000(2009).