[1] [1] Shi K W, Yow K Y, Lo C. Single & multi beam laser grooving process parameter development and die strength characterization for 40 nm node low-K/ULK wafer［C］. Electronics Packaging Technology Conference IEEE, 2014: 752-759.

[2] [2] Hsu H C, Chu L M, Liu B, et al. An investigation on dicing 28-nm node Cu/low-k wafer with a picosecond pulse laser［J］. Journal of the Microelectronics and Packaging Society, 2014, 21(4): 63-68.

[3] [3] Mai T A, Housh R, Brulé A, et al. Dicing of high-power white LEDs in heat sinks with the water jet-guided laser［C］. SPIE, 2007, 6486: 64860A.

[4] [4] Fujita M, Nakata Y, Miyanaga N, et al. Low-stress dicing assisted by pulsed laser for multilayer MEMS［C］. SPIE, 2009, 7202: 72020F.

[5] [5] Sun Zhilong, Cai Zhixiang, Yang Wei. Laser cutting and scribing of 96% alumina ceramic substrate and parameter optimization［J］. Laser & Optoelectronics Progress, 2015, 52(10): 101404.

[6] [6] Dushkina N M, Wagner F R, Boillat C, et al. Water jet guided laser versus saw dicing［C］. SPIE, 2003, 4977: 75-85.

[7] [7] Sibailly O, Richerzhagen B. Laser dicing of silicon and composite semiconductor materials［C］. SPIE, 2004, 5339: 394-397.

[8] [8] Lin Zhe, Ye Xiaohui, Han Jinpeng, et al. Patterning of graphene by femtosecond laser cutting［J］. Chinese J Lasers, 2015, 42(7): 0703002.

[9] [9] Fornaroli C, Holtkamp J, Gillner A. Dicing of thin Si wafers with a picosecond laser ablation process［J］. Physics Procedia, 2013, 41: 603-609.

[10] [10] Gecys P, Raciukaitis G, Wehrmann A, et al. Scribing of thin-film solar cells with picosecond and femtosecond lasers［J］. Journal of Laser Micro/Nanoengineering, 2012, 7(1): 33-37.

[11] [11] Wang Dawei, Gao Xifeng. Study on kerf roughness differences between line and arc analysis and elimination of laser precision cutting［J］. Chinese J Lasers, 2015, 42(3): 0303005.

[12] [12] Hiroshi M. Wafer separating method: TW97109079［P］. 2008-12-01.

[13] [13] Yosuke W, Ryugo O, Masaru N. Wafer dividing method: TW98108917［P］. 2009-12-01.

[14] [14] Borkulo J V, Hendriks R, Dijkstra P. Comparison between single & multi beam laser grooving of low-K layers［J］. International Symposium on Microelectronics, 2012, 1: 433-439.

[15] [15] Borkulo J V, Alsi R H, Netherlands B. Multi beam grooving and full cut laser dicing of IC wafers［J］. ECS Transactions, 2012, 44(1): 969-974.

[16] [16] Morris J H, Powers M, Rieger H. Method and apparatus for laser ablation of a target material: US6717101［P］. 2004-04-06.

[17] [17] Bovatsek J M, Patel R S. Highest-speed dicing of thin silicon wafers with nanosecond-pulse 355 nm Q-switched laser source using line-focus fluence optimization technique［C］. SPIE, 2010, 7585: 75850K.

[18] [18] Bischoff C, Jger E, Umhofer U. Beam shaping optics for process acceleration［J］. Laser Technik Journal, 2015, 12(3): 53-57.